MaxLite MLFP14DP4535 Manuel utilisateur

FLATMAX LED FLAT PANEL: PERFORMANCE SERIES

USER MANUAL

Thank you for purchasing this MaxLite product.

For additional information or assistance

please e-mail inf[email protected]m

or log on to www.maxlite.com

and click on the

Information and Quotes bar.

INSTALLATION GUIDE FOR:

1X4:

MLFP14DP4535

MLFP14DP4541

MLFP14DP4550

2X2:

MLFP22DP4535

MLFP22DP4541

MLFP22DP4550

2X4:

MLFP24DP6035

MLFP24DP6041

MLFP24DP6050

TABLE

DESCRIPTION....... 1

CAPABILITIES........ 1

TECHNICAL SPECIFICATIONS....... 2

FEATURES....... 3-4

MOUNTING PANELS IN CEILING....... 5

SET-UP....... 6

CONNECTING TO AC POWER SOURCE....... 7

SET-UP FOR ON/OFF........ 7

SET-UP FOR OPTIONAL IR REMOTE....... 8

SET-UP FOR 0-10V BALLAST DIMMER

Bu ld ng Controls / Dayl ght Harvest ng....... 9

SET-UP FOR 0-10V SIMPLE WALL DIMMING....... 10

SET-UP FOR LINKING PANELS....... 11

CONTENTS

DESCRIPTION & CAPABILITIES

DESCRIPTION

Models: Available in 1’x4’, 2’x2’, 2’x4’

Construction: A high performance LED flat panel designed for

installation in drop ceilings; typically used to replace standard 2’x2’

and 2’x4’ fluorescent fixtures. The profile is slim, only 4.1 inches deep

including the junction box, making it ideal for low depth ceiling cavities.

The housing provides maximum heat sink and thermal control. The lens is

a translucent white polycarbonate.

CAPABILITIES

On/O : Panels can operate independently, or can be daisy

chained together to work with standard on/off wall switches.

Dimming: Panels are fully dimmable with a standard 0-10V wall dimmer,

the hand-held remote dimmer, Building Controls and DaLI.

Building Controls: With the addition of Controls the panels can be

automated and customized to room use.

Daylight Harvesting: Additional sensors (such as Lutron® Graphic Eye)

added to Building Controls enable user to further reduce energy

consumption by taking advantage of natural light entering the room.

Linking: Up to 30 panels can be linked from the master panel.

TECHNICAL SPECIFICATIONS

1’ x 4’

Li e: 50,000 hour life based on L70 standards

Sel -Driven: No additional drivers required

Power: Connect directly to AC power supply 120V through 277V

Contains No Hazardous Material: Mercury and UV Free

# O LEDs: 144

Wattage: 45W Nominal

Lumens: 3500-3 00

CRI: 2

Color Temperature: 3500K, 4100K and 5000K

Weight: 9 lbs.

2’ x 2’

Li e: 50,000 hour life based on L70 standards

Sel -Driven: No additional drivers required

Power: Connect directly to AC power supply 120V through 277V

Contains No Hazardous Material: Mercury and UV Free

# O LEDs: 144

Wattage: 45W Nominal

Lumens: 3500-3 00

CRI: 2

Color Temperature: 3500K, 4100K and 5000K

Weight: 9 lbs.

2’ x 4’

Li e: 50,000 hour life based on L70 standards

Sel -Driven: No additional drivers required

Power: Connect directly to AC power supply 120V through 277V

Contains No Hazardous Material: Mercury and UV Free

# O LEDs: 2

Wattage: 60W Nominal

Lumens: 4900-5200

CRI: 2

Color Temperature: 3500K, 4100K and 5000K

Weight: 1 lbs.

FEATURES

Control Box

Back Panel

Control Box Removed

Violet/Yellow/Grey

Option leads

Option Module

Mounting Studs

Black, White, Green

for connection to

AC power source and

ground

Knock Outs

Wire Tie

Off Loops

Pass Thru

Wire Access

Face Frame Clip

IR Option Knock

Out Opening

Red/Blue

LED board

Leads

Power Supply

FEATURES

0-10V Connection on Dimming Control

LED Board Leads

IR Eye

Power Unit

4Dimming Sensor

0-10V Wire

IR Dimmer

Controller

MOUNTING PANELS IN CEILING

Ceiling Grid Groove:

1) The MaxLite LED Flat

Panels are designed to

lay into a gridded ceiling.

Simply start on one side

and gently lay down the

panel.

2) Open seismic hanger

1 0° to engage ceiling

grid frame.

* Model shown or re erance only

* Note: Uni orm support is vital; or sa ety purposes, each panel must have support wire attached.

Sa ety Wire Hangers:

Safety hanger tabs on the back of the panel

bend up easily to accept wire from the ceiling

structure. Thread wire through the tab and finish

off as for any other suspended or grid fixture.

SET-UPs

POWER

DOWN

MIN MAX

1. On/Off and AC Power Connection

2. IR Remote

3. 0-10 Ballast/Building Controls (Daylight Harvesting):

4. Sim le Wall Dimming

5. Linking Panels: Link up to 30 panels from master using 0-10 wires

60-10 Dimmer

0-10 0-10 0-10

CONNECTING TO AC SOURCE

Connecting panels to AC source supply:

All units must be individually

connected to the AC supply.

(120-277 VAC)

Black = Line

White = Neutral

Green = Ground

ON/OFF operation:

Line connection to be made to switched

lead from source.

AC supply connections

SET UP OPTIONAL I.R. REMOTE

1. Follow Connecting Power procedures (see page ).

Violet

Yellow

Grey

Power

Supply

IR DIMMER

Module

3. Connect control wires

from dimmer control to

driver violet, yellow, grey

2. Position IR Sensor so it can be visible to the Remote Controller

4. Connect IR Sensor Cable to

Dimmer controller input labeled IR

after cover is re installed.

5. IF IR REMOTE IS TO BE USED IN THE WALL

CRADLE ACCESSORY- The IR sensor must be

positioned in close proximity to the remote

IR Sensor

Locate

Sensor In

Room

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MaxLite Équipement d'éclairage

MaxLite

MaxLite maxLED MLCAN20LED50 Manuel utilisateur

MaxLite

MaxLite TRK WS Series Manuel utilisateur

MaxLite

MaxLite External U-Bend T8 Manuel utilisateur

MaxLite

MaxLite PhotonMax PH Series Manuel utilisateur

MaxLite

MaxLite MLFPG4-LHMSKIT Manuel utilisateur

MaxLite

MaxLite maxLED SEC12U50BPC12 Manuel utilisateur

MaxLite

MaxLite ML2LALABNU249CSEM Manuel utilisateur

MaxLite

MaxLite MSF Series Manuel utilisateur

MaxLite

MaxLite LED PLL DirectFit Series Manuel utilisateur

MaxLite

MaxLite CPL Series Manuel utilisateur

MaxLite

MaxLite MPulse Bollard Luminaire Manuel utilisateur

MaxLite

MaxLite C1D2 Manuel utilisateur

MaxLite

MaxLite LSU Series Manuel utilisateur

MaxLite

MaxLite ML2LAxP Series Manuel utilisateur

MaxLite

MaxLite CID1 Manuel utilisateur

MaxLite

MaxLite HL-LI2440UEM0 Manuel utilisateur

MaxLite

MaxLite maxLED MAL Series Manuel utilisateur

MaxLite

MaxLite HLRS Series Manuel utilisateur

MaxLite

MaxLite HL-WP Series Manuel utilisateur

MaxLite

MaxLite HLRM Series Manuel utilisateur

MaxLite

MaxLite HL Series Manuel utilisateur

MaxLite

MaxLite AR Series Manuel utilisateur

MaxLite

MaxLite CID1 Manuel utilisateur

MaxLite

MaxLite MaxLite HL Series Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur