MAXHUB V6 Manuel utilisateur
Beyond Collaboration
MAXHUB V6
Classical Series (C5530, C6530, C7530, C8630)
Quick Start Guide
01
Table of Contents
01
Safety Warnings .................................................................................................2
Unboxing Checklist....................................................................................... 4
Installation Guide ............................................................................................. 5
Reference On Wall Mount........................................................................ 7
Installing the Wireless Module ......................................................... 7
Installing the OPS/Android Module.............................................. 8
Removing OPS/Android Module ...................................................... 9
Product Appearance Introduction ..............................................10
Back Interface ..................................................................................................... 11
Interface Function .......................................................................................... 11
Maintenance ........................................................................................................ 13
Warranty................................................................................................................... 13
02
Thank you for choosing MAXHUB product.
Please read this document carefully and thoroughly before using the product. Should you have any
technical questions, please contact MAXHUB technical support.
Safety Warnings
Placement
1. Should be NOT expose the product to direct sunlight or heat source.
2. Please do NOT place the product on a slope, mount on an unstable stand or an insufficiently.
3. Please do NOT put the product near devices that generate strong magnetic fields.
4. Please do NOT place any heavy objects on the product.
5. Please do NOT place the product in a humid environment for it is NOT water-proof. Keep it from
water splashes.
Power
1. Please check the product’s operating voltage and frequency to ensure they match the local power
configuration.
2. Please unplug the device during thunderstorms.
3. Please unplug the power cable if the product will not be used for an extended period.
4. Please do NOT physically or mechanically damage the power cable.
5. Please use the MAXHUB cable and do NOT modify it.
6. Please make sure the AC is grounded.
Screen
1. Please do NOT use hard or sharp objects on the screen other than the MAXHUB stylus.
2. Please unplug the power before cleaning the product. Use a soft, dustless, and dry cloth to clean the
screen.
3. Please do NOT use water or liquid detergent to clean the product.
4. Please contact the authorized reseller for thorough cleaning.
5. Please do NOT display a high-brightness image on the screen for a long period of time.
Viewing Distance
The optimal viewing distance is 3-4 times the diagonal length of the screen.
Temperature & Humidity
1. Please do NOT place the product near a heater or radioactive source.
2. If the product is moved from a cold environment to a warm one, please unplug the power cable
and allow the product to gradually warm up for at least two hours to reduce moisture.
3. Operating temperature of the product is 0°C – 40°C. Operating humidity is between 0% - 90%RH.
03
Ventilation
Please place the product in an area with adequate ventilation, leaving at least a 10cm-space on the left,
right and back, and a 20cm-space above the product.
Earphone
High volume may cause temporary or permanent hearing loss.
Please turn down the volume before you put on the earphone.
Standby
A brief press of the power button will NOT shut down the product. It will switch the product into
standby mode, with only the screen turned off. To shut down the product, please press and hold the
power button for approximately 3 seconds. Confirm the shutdown command in the center of the screen
Notes for Cleaning
There are numerous heat vents at the back of the device. Please do NOT spray any liquid on the device.
Rocker Switch Status
“I” means power-on state. “0” means power-off state.
Maintenance
Please contact a MAXHUB authorized reseller for maintenance or repair.
Warranty Exclusions
MAXHUB does not warranty Products that match any one or few of the following
descriptions:
1. Product damage caused by disregarding the user manual’s instructions.
2. Hardware damage caused by improper set up.
3. Product damage caused by unauthorized product modification or maintenance.
4. Product damage caused by using the product in an unsuitable environment.
5. Product damage caused by subjecting the product to abnormal external force.
6. Product damage caused by natural disasters or other force majeure.
7. Damage caused by freight or shipping.
8. Deliberate or accidental damage resulting from a cleaning regime not in accordance with the
cleaning and maintenance instructions specified in the user manual.
Additional exclusions:
1. The Warranty does not cover consumables, including but not limited to batteries.
2. The Warranty does does not cover, or is void for, products whose Product Label has been removed
or defaced, as this prevents warranty and ownership identification.
04
Unboxing Checklist
A
B
A/B Vertical bars are preinstalled
on the device.
3m Power Cord*3（EU*1,AU*1,UK*1）
1
1.8m USB Type-C Cable*1
2
Wi-Fi Module*1
3
Passive Stylus*2
4
VESA Wall Mounting Bracket*1
5
1 2 3
4 5
3. The Warranty does not cover products with a damaged Warranty Sticker.
4. The Warranty does not cover products for which there is no certificate of purchase.
5. The Warranty does not cover regular maintenance, nor does it cover repairs or replacement of parts
due to normal wear and tear.
*All photoes here are for reference only,Specifications are subject to the phisycal product.
05
Installation Guide
1. Remove the panel from the box and prepare for installation.
Place the panel on soft material like mat.
Bracket package is placed in accessory box.
2. Confirm the panel installation position.
The height and pictures are only for reference, please refer to the actual installation size on site.
①
②
06
3. Take 8 pcs expansion rubber plug B and
screw them into the wall. It is recommended to
use a 10mm impact drill bit.
5. Reverse-tighten the safety screw to make the
top of the screw reach the second screw hole.
Note: This step is especially important for
installation on the mobile stand. Tightening the
safety screw will make the device more stable.
Note: Please keep the panel in the center of
the bracket.
6. Hang the panel vertically on the bracket and
finish installation.
4. Fix the wall bracket onto the 8pcs expansion
plug B, using a combination of 8pcs screw C
and gasket D.
07
Reference for Wall Mounting
The physical dimensions listed below should be taken into consideration for wall mounting. For ease of
operation, maintain a proper distance between the wall and rear of the product panel.
Series Classic
Dimension 55" 65" 75" 86"
1263mm 1488mm
903mm
118mm
1709mm
1026mm
117mm
1957mm
1160mm
130mm
776mm
118mm
L
H
W
NOTE: The table and diagram are for reference only.
Installing the Wireless Module
Please make sure that the following items are ready before setting up the wireless module.
1×Interactive Flat Panel
1×Wireless Module SI06
2×Screws (CM3×6mm, Black)
08
Step 1: Remove the Mylar on the bottom of the interactive flat panel.
Step 2: Insert the wireless module SI06 into the wireless module slot and screw securely into place.
Installing the OPS/Android Module
Note: Please make sure the power is off before proceeding with the installation.
Step 1: Unscrew and remove the cover. Step 2: Prepare the OPS/Android Module.
Step 3: Correct positioning of the modules and slots.
OPS
S
Android
Slot
Cover
Up
Bottom
09
Step 4: Installation of OPS/Android module.
Rail up
Insert the
module
Removing the OPS/Android Module
Note: Please make sure the power is off before proceeding with the removal.
Press up and unlock the
module and take it out.
Turn the MAXHUB Interactive Flat Panel on and off
1. Plug the power cable into the power socket of the product.
2. Plug the power cable to the power supply.
3. Fliptherockerswitchandpressonpowerbuttontobootthe prod-
uct. The indicator will turn blue.
Autres manuels pour V6
1
Ce manuel convient aux modèles suivants
4
Table des matières
Autres manuels MAXHUB Système de conférence
Manuels Système de conférence populaires d'autres marques
Kramer
Kramer VIA GO Manuel utilisateur
AVT
AVT MAGIC AC1 Go Manuel utilisateur
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur
Sony
Sony PCS-I150 Manuel utilisateur
Middle Atlantic Products
Middle Atlantic Products VTC Series Manuel utilisateur
Prentke Romich Company
Prentke Romich Company Vanguard Plus Mode d’emploi
