Marshall Electronics V-RD151-4 Manuel utilisateur
1
2
3
4
5
6
7
V-RD151-
V-RD151-
4
4
Users Guide
Users Guide
8
9
10
11
Product Overview
Features
Electrical Specifications
Mechanical Specifications
Installation
Input Connectors
Switch Settings and Indicators
Primary Menu Functions
Alternate Menu Functions
Analog PC Menu Functions
Warranty
Volume adjustment does not function •
Displayed source selection •
MODE adjustment does not function •
System Functions •
System Reset •
OSD Timeout •
OSD Position •
System Info •
Contrast, Color, Brightness Adjust •
System Menu in Analog PC Mode •
PC Display Position Adjust (Not available in Composite or S-Video mode) •
PC Input Automatic Configuration •
Marshall Electronics warranties to the first consumer, that this V-RD151-4 rackmount monitor will, under normal use, be free from defects in workmanship
and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with
a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or con-
struction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above,
or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
Due to constant effort to improve products and product features, specifications may change without notice.
Warranty
11
Alternate Menu Functions
9
Menu is shown by holding down ALT and then pressing the
MENU button. (ALT+MENU). Function selection and cursor
movement is performed with the source selection buttons.
CH1 - ID Input 5 character
label for each source
CH2 - Date/Time Setup
CH3 - Sequence (Off to30 Second) Changes displayed image at programmed
intervals when SEQN function is selected
CH4 - Miscellany. PIP FORMAT- position and number of PIP windows.
DATE/TIME-CH DISPLAY - Characters are displayed on the screen over video images.
* NOTE: Date/Time and Channel Display overlay is not available in PC ANALOG or S-VIDEO modes
Analog PC Menu Functions
10
System Menu in Analog PC Mode
* Note: When in PC Analog mode to change the source press the SELECT
button with no OSD is displayed on screen
Menu Selected
System Display in Pixels and Frequency
PC Display Position Adjust
(Not available in Composite or S-Video mode)
PC Image Phase and Clock Adjust
(Not available in Composite or S-Video mode)
PC Input Automatic Configuration
(Auto config requires signal to be present
on VGA connector)
Marshall Electronics
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • Fax: 310-333-0688
www.LCDRacks.com
Product Overview
The V-RD151P-4 is space saving monitor in a drawer with a high-resolution 1024 × 768 pixel 15” display.
This model also features a Quad Split and Sequential Switcher for composite video signals. The Quad Split
feature allows any mix of the four composite video channels to appear on the monitor as real time picture-
in-picture images. For added flexibility, this unit can accommodate composite video, Y/C (S-Video) or XGA
computer signals for monitoring (S-Video and XGA inputs are only available in full screen mode). All con-
nections are accessed from the rear of the drawer enclosure and include a loop through for each signal.
When the display is closed into the drawer, the monitor will automatically be placed into standby mode and
a keyed lock is provided for secure transport. V-PS12-5V-1 Power supply and owners manual are included.
Display (Viewing Area) 15.1” (11.69”H × 9.12”V) (29.7cm × 23.1cm)
Viewing Angle 1700In any direction
Resolution (Dots) 1280H × 768V / 2.95 million pixels
Dot Pitch 0.297mm × 0.302mm
Number of Colors 16.7 Million
Brightness (in cd/m²) 250 cd/m²
Contrast Ratio 500:1
System NTSC - V-RD151-4
PAL - V-RD151-4-PAL
Inputs Composite-BNC 75W, Y/C (S-Video)-4 Pin Mini-din Female,
Scalable XGA HD-15 Female,
12VDC-Conxall Female
Outputs Composite Active Loop-BNC, SDI Active Loop-BNC,
Y/C (S-video) Active Loop-4 Pin Mini-din Female, 10-bit D/A out-BNC
Power required 12VDC, 5.0Amps peak
V-RD151-4 Dimensions 19.12”W × 1.75 “H × 22”D (48.5cm × 4.5cm × 55.8cm)
V-RD151-4 Approx. Weight 24.15 lbs (10.94kg)
V-PS12-5V-1Power Supply Weight 1 lbs (0.45kg)
High Resolution 1024 × 768 pixels, 786,432 total
Bright 250 candle luminance
4 Video inputs with 75Ωtermination and active loop through feature
Ultra-compact design fits in EIA standard rack 1U high
Built-in Quad Splitter/Sequential Switcher
Available in NTSC or PAL format
Key lock for secure transportation
25
V-RD151-4 USERS GUIDE
Features
2
1
Electrical Specifications
3
Mechanical Specifications
4
Installation
5
MODE adjustment does not function
System Functions
RESET - resets the monitor to factory defaults.
TV - does not function on this model
OSD TIMEOUT- Adjust timeout of menu display. OSD - (On Screen Display)
OSD POSITION- adjust placement of OSD
SYSTEM INFO- Displays system configuration information
OSD Position
SELECT
Menu Control
System Reset
SELECT
Menu Control
OSD Timeout
SELECT
Menu Control
SELECT
Menu Control
System Info
SELECT
Menu Control
SELECT
Menu Control
Contrast Color Brightness No Function
Contrast, Color, Brightness Adjust
1. The V-RD151-4 includes the following items:
2. 2. Unpack the V-RD151-4, mounting hardware and accompanying V-PS12-5V1 power supply.
Physically inspect for any damage that may have occurred during shipping. Should there be any dam-
age, immediately contact Marshall Electronics at 800-800-6608. If you are not located within the conti-
nental united states call +1 310-333-0606.
1. V-RD151-4 Drawer Monitor Assembly
2. 2 Drawer Lock Keys
3. 2 Adjustable Rear Support Brackets
4. 4 Rear Bracket Thumb Screws
Marshall Electronics
3
3. After inspection, attach adjustable rear support brackets using the supplied thumbscrews and install the
V-RD151-4 in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is
required when installed to prevent possible damage to the internal components.
S-Video IN
4 Pin Din
(Female)
Pin1 - GND
Pin2 - GND
Pin3 – Y in
Pin4 – C in
VGA IN
HD-15
(FEMALE)
Pin1-Red IN
Pin2-Grn IN
Pin3-Blu IN
Pin4-
Pin5-
Pin6-Gnd
Pin7-Gnd
Pin8-Gnd
Pin 9-
Pin10-
Pin11-
Pin12-
Pin13-
Pin14-HSync
Pin15-VSync
Composite
Video IN 1 to 4
Attached bracketThumbscrews and
rear support bracket
Input Connectors
6
Active Composite
Video out 1 to 4
12 VDC from
V-PS12-5V1 power
supply
Left Pin - Pos
Right Pin- Neg
S-Video OUT
4 Pin Din (Female)
Pin1 - GND
Pin2 - GND
Pin3 – Y in
Pin4 – C in
* All Outputs Require Power to be applied for activation
4. Connect required cables for signal input and output.
5. Plug the V-PS12-5V1 power supply into the A.C. source.
6. Attach the twist lock Conxal power connection from V-PS12-5V1 power supply to the back of the drawer.
7. Completely Slide the V-RD151-4 out from the drawer and tilt to your desired viewing angle.
8. Turn on the V-RD151-4 by depressing the power switch located on the front of the unit.
Note: All BNC connectors should be rated for 75Ω.
Note: Power must be applied to the V-RD151-4 to activate loop through video connections
Marshall Electronics
4
AB
C
C. Primary Menu Controls
Power On/Off selection switch illuminates when monitor is switched on.
Primary menu functions are accessed by pressing the MENU button.
Volume adjustment
does not function
Switch Settings and Indicators
7
Drawer close interlock micro-switch places
monitor into standby mode when in stored position
A. Digital Process Controls
(DPC)-not available in PC or S-Video Modes
Quad - 4 channels displayed simultaneously on the screen.
PIP - Picture in Picture menu selected display of 2 to 4 channels.
Zoom - expands a selected portion of the display
Freeze - of full screen image
SEQN - menu selected channel display for 2 to 4 channels of full screen
image. Sequence switching can be set for 1 to 30 second intervals.
MENU - enables alternate menu
ALT - shift control for selection of highlighted functions
B. Composite Video Controls
Selection for full frame viewing of composite video channels 1 to 4.
Also used for Cursor controls of alternate menu functions.
Illuminates when channel is selected.
* NOTE: Digital Process Control is not available in PC ANALOG or S-VIDEO modes
Displayed source selection
SELECT
Menu Control
PC Analog - Selects input from the HD15 VGA IN connector.
Image is full screen. No DPC functions
Composite - Selects input of composite video 1 to 4 plus DPC functions
S-VHS - Selects input from the
S-VIDEO IN connector. Image is
full screen. No DPC functions
Television - does not function on this model
Primary Menu Functions
8
V-RD151-4 USERS GUIDE
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Marshall Electronics Moniteur
Marshall Electronics
Marshall Electronics V-LCD70P-HDA Manuel utilisateur
Marshall Electronics
Marshall Electronics V-R84DP-HDSDI Manuel utilisateur
Marshall Electronics
Marshall Electronics M-LYNX-702W Manuel utilisateur
Marshall Electronics
Marshall Electronics M-CT710 Manuel utilisateur
Marshall Electronics
Marshall Electronics V-R573P Manuel utilisateur
Marshall Electronics
Marshall Electronics V-R84DP-2SDI Manuel utilisateur
Marshall Electronics
Marshall Electronics V-R102DP-2SDI Manuel utilisateur
Marshall Electronics
Marshall Electronics OR-185-3GSDI Manuel utilisateur
Marshall Electronics
Marshall Electronics V-LCD15SB-AFHD-DT Manuel utilisateur
Marshall Electronics
Marshall Electronics QV261-HDSDI Manuel utilisateur
Marshall Electronics
Marshall Electronics V-R82SB-AFHD Manuel utilisateur
Marshall Electronics
Marshall Electronics M-LYNX-702W Manuel utilisateur
Marshall Electronics
Marshall Electronics V-LCD50-HDMI Manuel utilisateur
Marshall Electronics
Marshall Electronics V-R901DP-AFHD Manuel utilisateur
Marshall Electronics
Marshall Electronics V-DV-PWR1 Manuel utilisateur
Marshall Electronics
Marshall Electronics SD/HD Widescreen LCD Monitor V-R201P-AFHD Manuel utilisateur
Marshall Electronics
Marshall Electronics V-MD902 Manuel utilisateur
Marshall Electronics
Marshall Electronics V-R72DP Manuel utilisateur
Marshall Electronics
Marshall Electronics V-RD171P-HDA Manuel utilisateur
Marshall Electronics
Marshall Electronics V-MD171X Manuel utilisateur
Marshall Electronics
Marshall Electronics Dual 10.4-inch LCD Rack Mounted Monitor... Manuel utilisateur
Marshall Electronics
Marshall Electronics V-LCD50-HDI Manuel utilisateur
Marshall Electronics
Marshall Electronics M-Lynx-10 Manuel utilisateur
Marshall Electronics
Marshall Electronics V-MD151 Manuel utilisateur
