Marshall Amplification MINI JUBILEE 2525H Manuel utilisateur

STUDIO JUBILEE

2525H & 2525C

USER MANUAL

ENGLISH

CONGRATULATIONS ON

PURCHASING YOUR MARSHALL

STUDIO JUBILEE AMP.

THE STUDIO JUBILEE DELIVERS THE TONE AND FLEXIBILITY OF AN ICONIC

2555 SILVER JUBILEE AMP IN A MORE PORTABLE FORM. GIVING THOSE

IN THE STUDIO AND PLAYING INTIMATE GIGS ACCESS TO THAT FAMOUS

MARSHALL SOUND.

WE HOPE YOU ENJOY YOUR NEW AMP AS MUCH AS WE HAVE ENJOYED

DESIGNING AND BUILDING IT FOR YOU.

THE MARSHALL TEAM

Warning: before going any further, make

sure that your amp is compatible with your

mains electricity supply. If you have any

doubt, please seek help from a qualied

technician – your Marshall dealer can help

you with this.

MAINS INPUT & FUSE

The specic mains input voltage rating

that your amp has been manufactured for

is indicated on the rear panel of the amp.

Your amp is provided with a detachable

mains (power) lead, which should be

connected to the mains input socket on the

rear panel of the amp. The correct value

and type of mains fuse is specied on the

rear panel of the amp.

Never attempt to bypass the fuse or t one

of the incorrect value or type.

IMPORTANT SET UP INFORMATION

1. When using your amp with one or

more speaker cabinets, make sure

that they are connected to the correct

loudspeaker jack sockets.

Warning: failure to do the above may

damage your amp. When connecting

a speaker cabinet make sure that you

use a proper speaker cable. Never use a

screened (shielded) guitar cable for this

purpose.

2. Ensure that the power switch is set to

the off position and the output switch

is set to standby.

3. Connect the supplied mains (power)

lead into the mains input on the rear

panel rst and then into an electricity

outlet.

4. Ensure that any master, volume and/

or output level controls on the front

panel are set to zero.

5. Plug your guitar into the input jack

socket on the front panel.

6. Turn the front panel power switch on

and wait a couple of minutes.

7. Select between 20W / 5W using the

output switch.

8. Turn the volume up to your preferred

level and you’re ready to play.

TRANSPORTING YOUR EQUIPMENT

Please ensure that your amp is switched

off, unplugged from the mains electricity

supply and all removable cables have been

disconnected from your equipment before

attempting to move it.

ENGLISH

1.0

WARNING! SAFETY INSTRUCTIONS

PLEASE READ THIS MANUAL CAREFULLY BEFORE PLUGGING IN. FOLLOW ALL INSTRUCTIONS AND HEED ALL WARNINGS.

The JCM25/50 Silver Jubilee Series was

produced in 1987 to celebrate 25 years

of Marshall Amplication and 50 years of

Jim Marshall being in the music business.

Inspired by this acclaimed series, the

2525C and the 2525H combine Silver

Jubilee preamp features and styling in a

lower power design.

2525H AND 2525C

VALVES

2 x ECC83, 1 x ECC83 (phase splitter),

2 x EL34

CHANNELS

2 (Split)

POWER CONTROL

20W or 5W

SPEAKERS

1 x 12”

Celestion G12M-25 (16Ω, 25W)

(combo only)

EQUALISATION

Treble, middle, bass and presence

SPEAKER OUTPUTS

5 x 1/4” jack sockets

(16Ω load / 8Ω load / 4Ω load)

OUTPUTS

DI Output

ENGLISH

2.0

OVERVIEW AND SPECIFICATION

1. POWER

This is the on/off switch for the mains

power to the amp. When power is

switched on, the switch will light red.

Warning: please ensure that the amp

is switched off and unplugged from the

mains electricity supply before being

moved.

2. OUTPUT

The output power is in low power mode

(5W) when set to low, when in the middle

position it is set to standby and when set

to high power the unit runs at full power

(20W).

Standby mode: should be used during

breaks in performances, instead of leaving

the amp on full power. Always turn the

power on for two minutes before using the

standby switch.

3. PRESENCE

Adjusts the high frequencies of the power

amp. Increasing the high frequencies adds

more bite to your sound.

4. BASS

Adjusts the low frequencies of the amp.

It will add bottom end and depth to your

sound.

5. MIDDLE

Adjusts the mid frequencies of the amp.

Giving you anything from a fat and full

sound to an aggressive tone.

6. TREBLE

Adjust the upper frequencies of the amp.

Your tone will get brighter as it is turned

up.

2525H (COMBO SHOWN ON NEXT PAGE)

ENGLISH

118 9 107

54321

3.0

FRONT PANEL FUNCTIONS

7. OUTPUT MASTER / LEAD CHANNEL

The output master control adjusts the

output of the preamp section to the power

stage.

The lead channel is selected using the

footswitch (supplied PEDL-90003). The

channel can also be switched by using the

push/pull function of the output master

control. The amount of gain applied to the

lead channel can be controlled using the

input gain control (front panel function

10).

8. LEAD CHANNEL LED

The LED indicator will light and glow red

when the lead channel is selected.

9. LEAD MASTER

When the lead channel is active (front

panel function 7) the lead master control

adjusts the output level of the lead

channel.

10. INPUT GAIN

Adjusts the overall sensitivity of the input

circuit. It controls the gain level of the

clean/crunch rhythm clip mode and the

lead channel. The pull switch activates

rhythm clip mode, providing heavier, more

driven tones.

Note: the apparent drop in volume when

rhythm clip mode is selected may be

overcome by increasing the level of the

output master (front panel function 7).

11. INPUT

Use this jack socket to connect your guitar

to the amp.

2525C (HEAD SHOWN ON PREVIOUS PAGE)

ENGLISH

11 8910 7 65 4 3 2 1

3.0

FRONT PANEL FUNCTIONS CONTINUED

1. LOUDSPEAKERS

There are ve speaker outputs available.

These are 1/4” jack sockets. They are

labelled according to the intended

impedances:

• 16Ω: connect a 16 Ohm guitar cabinet

to this jack.

• 8Ω: connect a single 8 Ohm guitar

cabinet or two 16 Ohm cabinets.

• 4Ω: connect a single 4 Ohm guitar

cabinet or two 8 Ohm guitar cabinets.

Warning: although the amplier has

ve speaker outputs, never attempt to

connect more speakers than rated. The

safe combinations are: 1 x 16 Ohm, 1 x 8

Ohm, 1 x 4 Ohm, 2 x16 Ohm or 2 x 8 Ohm.

Any other speaker conguration may

stress the power amplier section and in

extreme cases may lead to valve and/or

output transformer failure.

Never use the 2525 without a speaker

load.

2. DI OUTPUT

A DI output allows you to connect to

recording device or sound desk.

Note: using the DI does not omit the need

for a speaker to be connected. See the

warning on rear panel function 1.

3. FOOTSWITCH

Connect the channel footswitch here

(PEDL-90003, supplied).

4. FX LOOP

The series FX loop connects the amp to

external FX (nominal level -10dBV). The

send jack socket connects to the input

of the external FX unit and the return

jack socket connects to the output of the

external FX unit.

Note: the send jack socket can be used

to connect to an external power amp. This

does not omit the need for a speaker to be

connected to the amplier’s output stage.

See the warning on rear panel function 1.

The return can be used to connect an

external preamp.

2525H (COMBO SHOWN ON NEXT PAGE)

ENGLISH

4.0

REAR PANEL FUNCTIONS

PANL-00370 Iss A

RETURNSEND

MAINS INPUT

230V ~ 50Hz

100 WATTS

FUSE

230V - T1AE250V

100-130V - T2AE250V

MODEL: 2525H

1 x 16 OHM

“CLASS 2 WIRING”

CONNECT SPEAKERS

BEFORE USE

OUTPUT: 20 WATTS RMS

LOUDSPEAKERS

FX LOOP

1 x 8 OHM

2 x 16 OHM

1 x 4 OHM

2 x 8 OHM

HT FUSE

T315mAE250V

FOOTSWITCHD.I.

1 2 3 4 5 6

5. HT FUSE

The panel mounted fuse holder allows

access to replace blown fuses. If necessary

the HT fuse will blow to protect the

internal circuitry. This can sometimes

happen in the event of output valve

failure.

Note: replace the fuse only with the

value shown on the rear panel. Before

attempting to change the fuse you must

always rst switch the amp off and

disconnect it from the mains electricity

supply. If in doubt, contact your Marshall

dealer.

6. MAINS INPUT

Connects the amp to the mains power

supply.

Note: the mains input socket has an

integrated fuse compartment. Ensure

that the value of a replacement fuse

matches the labelling on the amp rear

panel. You must always rst switch off

and disconnect from the mains electricity

supply before attempting to access the

fuse compartment. If in doubt, contact

your Marshall dealer.

2525C (HEAD SHOWN ON PREVIOUS PAGE)

ENGLISH

4.0

REAR PANEL FUNCTIONS CONTINUED

RETURN SEND 1 x 16 OHM

LOUDSPEAKERS

FX LOOP

1 x 8 OHM

2 x 16 OHM

1 x 4 OHM

2 x 8 OHM

FOOTSWITCH D.I.

MAINS INPUT

HT FUSE

T315mAE250V

PANL-00372 Iss A

230V ~ 50Hz

100 WATTS

FUSE

230V - T1AE250V

100-130V - T2AE250V

123456

ENGLISH

WHILST THE INFORMATION CONTAINED HEREIN IS CORRECT AT THE TIME

OF PUBLICATION, DUE TO ITS POLICY OF CONSTANT IMPROVEMENT AND

DEVELOPMENT, MARSHALL AMPLIFICATION PLC RESERVES THE RIGHT TO

ALTER SPECIFICATIONS WITHOUT PRIOR NOTICE.

MARSHALL AMPLIFICATION PLC,

DENBIGH ROAD,

BLETCHLEY, MILTON KEYNES,

MK1 1DQ, ENGLAND.

T: +44 (0) 1908 375411

MARSHALL AMPLIFICATION PLC

REGISTERED IN ENGLAND

REGISTERED NUMBER: 805676

M3310.127 | BOOK-00154-00-V.1

STUDIO JUBILEE

2525H & 2525C

MANUEL D'UTILISATION

Autres manuels pour MINI JUBILEE 2525H

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Marshall Amplification Amplificateur

Marshall Amplification

Marshall Amplification JCM800 Manuel utilisateur

Marshall Amplification

Marshall Amplification MF350 Manuel utilisateur

Marshall Amplification

Marshall Amplification JMP-1H Manuel utilisateur

Marshall Amplification

Marshall Amplification 2555 Manuel utilisateur

Marshall Amplification

Marshall Amplification VS65R Manuel utilisateur

Marshall Amplification

Marshall Amplification 1922 Manuel utilisateur

Marshall Amplification

Marshall Amplification MG GOLD SERIES Manuel utilisateur

Marshall Amplification

Marshall Amplification MINI JUBILEE 2525H Manuel utilisateur

Marshall Amplification

Marshall Amplification MG10 Manuel utilisateur

Marshall Amplification

Marshall Amplification MGP 9001 Manuel utilisateur

Marshall Amplification

Marshall Amplification 2555X Manuel utilisateur

Marshall Amplification

Marshall Amplification CODE25 Manuel utilisateur

Marshall Amplification

Marshall Amplification DSL100HR Manuel utilisateur

Marshall Amplification

Marshall Amplification JCM900 4100 Manuel utilisateur

Marshall Amplification

Marshall Amplification Valvestate VS15 Manuel utilisateur

Marshall Amplification

Marshall Amplification AMPLIFIER LIMITED EDITION JTM45 100 DUAL OUTPUT 100W SUPER LEAD... Manuel utilisateur

Marshall Amplification

Marshall Amplification JVM410C Manuel utilisateur

Marshall Amplification

Marshall Amplification JVM410C Manuel utilisateur

Marshall Amplification

Marshall Amplification Extension Cabinet Manuel utilisateur

Marshall Amplification

Marshall Amplification DSL 15H Manuel utilisateur

Marshall Amplification

Marshall Amplification Acoustic Soloist AS50D Manuel utilisateur

Marshall Amplification

Marshall Amplification DSL5CR Manuel utilisateur

Marshall Amplification

Marshall Amplification DSL20CR Manuel utilisateur

Marshall Amplification

Marshall Amplification EL84 20/20 Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur