Switching to Counting mode
To count items on the scale, first place a sample quantity on the scale. Switch the
indicator to count mode by pressing TOTAL, and holding the button until ‘SAMPLE’
is displayed.
Press PRINT/ON/OFF. ‘PCS’ will display on the screen. Use the LB/KG keys for left
and right and TARE and ZERO as up and down to input the sample size.
To confirm the amount, press PRINT/ON/OFF.Adding more items will increase the
count on the display.
Press HOLD to return to weighing mode.
To set target weights and high or low limits
Press and hold HOLD until ‘F1’ is displayed.
Press and hold ZERO until ‘F2’ is displayed.
Press and hold PRINT until ‘F2.1’ is displayed.
Press and hold ZERO until ‘F2.3’ is displayed.
Press PRINT.
Using GROSS and ZERO, set your target weight, and then press PRINT to confirm.
Press ZERO until ‘F2.4’ is displayed, and then press PRINT.
Using GROSS and ZERO, set your upper error limit, and then press PRINT to
confirm.
Press ZERO until ‘F2.5’ is displayed, then press PRINT.
Using GROSS and ZERO, set your lower error limit, and then press PRINT to
confirm.
Press the HOLD button twice to return to normal weighing.
The display will now flash until you get to within 1kg of the target weight, and will
stay steady until you are 1kg above the target weight.
To display the current target weight in normal weighing mode, press and hold
TOTAL until ‘target’ is displayed, and then press PRINT.
Press PRINT again, and using GROSS and ZERO the target weight can be altered.
Press PRINT to return to weighing.
NB (PT-600 only):
Pressing PRINT whilst under target will print weight and state as ‘less’
Pressing PRINT whilst at target will print weight and state as ‘OK’
Pressing PRINT whilst over target will print weight and state as ‘over’
