Mars C900 FL-TG Manuel utilisateur
P 1 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
User Manual
Model:
C900 FL-TG
Description:
Wireless Monitor
This Document Revision:
2
Date:
2020.08.11
60 Kingsbridge Road Piscataway, New Jersey 08854
P 908.233.0101 | F 908.233.4111
www.marsint.com
P 2 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
This page was left intentionally blank
P 3 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
Information in this document is subject to change without notice.
All rights reserved.
Please send comments to:
E-mail: techinfo@marsint.com
Phone: 908.233.0101
Fax: 908.233.4111
1Revision History
REV
ECN
Description
Date
By
1.0
Initial release
2020/01/20
CM
1.01
Added Channel Frequency Table
2020/01/28
CM
2.0
10585
Added Required FCC information
2020/08/11
DJS
P 4 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
Table of Contents
1Revision History.................................................................................................................................. 3
2Device Overview.................................................................................................................................. 7
3Applications........................................................................................................................................... 7
4Hardware/ Software Needed ........................................................................................................ 7
5Warning................................................................................................................................................... 7
5.1 Electrostatic sensitive device................................................................................................ 8
5.2 Additional Notice........................................................................................................................ 8
6Installation............................................................................................................................................. 8
6.1 Provision Application ...............................................................................................................9
6.2 Factory Defaults ....................................................................................................................... 11
6.3 User Updates ............................................................................................................................. 12
7Troubleshooting Guide.................................................................................................................. 18
8Device Details .................................................................................................................................... 19
9Specification....................................................................................................................................... 20
9.1 RF Specifications...................................................................................................................... 20
9.2 RF Frequency Channel Setting .......................................................................................... 21
9.3 Mechanical.................................................................................................................................. 22
10 Outline Drawing ........................................................................................................................... 23
11 Tools .................................................................................................................................................. 23
12 Block Diagram............................................................................................................................... 24
12.1 Wireless Monitor................................................................................................................. 24
12.2 Architecture Overview...................................................................................................... 24
P 5 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
13 FCC Notice....................................................................................................................................... 26
14 Warranty Information............................................................................................................... 27
14.1 Warranty Limitations........................................................................................................ 27
14.2 Limitation of Damage ........................................................................................................ 27
15 Limitation of Liability ................................................................................................................ 28
16 Return Material Authorization (RMA) ............................................................................... 28
17 Product Identification Scheme .............................................................................................. 29
Figure 1: RF Notice Label......................................................................................................................... 8
Figure 2: ESD Attention Label ............................................................................................................... 8
Figure 3: Wireless Radio Connected to Laptop using custom cable .................................... 9
Figure 4: COM Port Field........................................................................................................................ 10
Figure 5: Connect Button ....................................................................................................................... 10
Figure 6: MAC Address View ................................................................................................................. 11
Figure 7: Provision Tab Window (MGL Configuration)............................................................. 11
Figure 8: Provision Tab Window (Station Configuration) ....................................................... 13
Figure 9: Status Tab Window............................................................................................................... 13
Figure 10: Advanced Tab Window ..................................................................................................... 15
Figure 11: Super User Mode Window................................................................................................ 15
Figure 12: Advanced Tab Warning Window.................................................................................. 16
Figure 13: Bootloader Tab Window .................................................................................................. 16
Figure 14: Hex File Field Window....................................................................................................... 16
Figure 15: Flash Boot Loader Button Window.............................................................................. 17
Figure 16: Status Window Bar (shown in progress)................................................................... 17
Figure 17: Flashing Success Window (bottom left corner) ...................................................... 17
Figure 18: Wireless Firmware Version Field Result Window.................................................. 17
P 6 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
Figure 19: File Window........................................................................................................................... 18
Figure 20: Wireless Monitor Underside View............................................................................. 18
Figure 21: No COM Port Found Window.......................................................................................... 19
Figure 22: Provision App Ghost Window ......................................................................................... 19
Figure 23: C900 FL-TG Wireless Monitor Details...................................................................... 20
Figure 24: RF Frequency Channel Window.................................................................................. 21
Figure 25: Wireless Monitor Input Interface Connector........................................................ 22
Figure 26: Wireless Monitor Block Diagram ............................................................................... 24
Table 1: Factory Defaults...................................................................................................................... 12
Table 2: Status Tab Field Definition ................................................................................................ 14
Table 3: Channel Frequency List....................................................................................................... 21
P 7 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
2Device Overview
The wireless monitor (also called radio) is a transceiver that monitors the health of
a light and wirelessly provide status to a central location. It will also provide the
health of a battery backup in light. In an ideal condition, the 915 MHz frequency
band (sub 1GHz) signal has a range of up to 4,000 feet.
Device has an interface 4 wire assembly harness to power up with 5 Volt / Ground
and TTL serial transmit and receive interface data lines.
Device can also be adapted to connect to a digital addressable lighting interface
(DALI) for network based systems that control lighting applications.
A provision application tool is included with the wireless monitor for viewing and
setting the device parameters.
3Applications
Internet of Things (IoT)
Metering
Smart city
Sensor networks
Industrial Automation
4Hardware/ Software Needed
Computer or Tablet (Windows 10 or Higher), not included with product
Provision Application, included with product
6 Feet Custom Cable (USB B to Mini USB), sold separately
5Warning
Important device safety and handling information.
Follow and comply with site safety policies. RF Frequency Notice
P 8 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
Figure 1: RF Notice Label
5.1 Electrostatic sensitive device
There is an electrostatic sensitive device (ESD) inside equipment.
Figure 2: ESD Attention Label
Prior to handling equipment, electrically discharge yourself by momentarily
touching an unpainted metal ground object.
5.2 Additional Notice
Terminate device RF port with a 50 Ohm load using antenna.
Maximum RF input level is 10 dBm at the device RF port.
6Installation
Power up wireless monitor with 5 Volts and Ground. With a current capability of at
least 250 milli-amps.
38
RF Signs
Sign Examples
P 9 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
6.1 Provision Application
Application Files Required
6.1.1.1 8880-027_Application_Provision_Tool_CVL
6.1.1.2 8880-029_AutoFirmwareProgramming
Unzip both files to the C:\ drive root directory.
Connect the Computer / Tablet to the wireless monitor using custom cable, shown
in pictures below.
Tablet with cable
(Connection End 1)
Custom Cable
USB-B to Mini-USB
MGL Light Fixture with cable
(Connection End 2)
Figure 3: Wireless Radio Connected to Laptop using custom cable
Make sure the wireless monitor amber LED turns “On” located (in underside) next
to the mini USB connector. The LED will blink the firmware code revision.
oRun the Application
To open application, click the executable file called “cvprovision.exe” located in the
“8880-027_ Application_ Provision_ Tool_ CVL”. Create a shortcut to this application
exe file on your desktop.
oScreen Layout
The provision application has the 3 tabs.
P 10 of 29
8880-610_200_c900 fl-tg wireless monitor user manual
Rev: 2
1. Provision Tab: The Provision tab is to provision wireless monitor in which
has fields updated by electrician.
2. Status Tab: The Status tab is to check the firmware version and to report
back problems to engineer.
3. Advanced Tab: The Advanced tab is to load firmware upgrade and for a
Super User to make changes.
oProvision Tab
On the application provision tab, click the > Refresh button. The COM port that the
wireless monitor is connected to will appear on the left field.
Figure 4: COM Port Field
Click the > Connect button.
Figure 5: Connect Button
Application will connect to the wireless monitor and display the MAC Address.
Confirm MAC Address is displayed which is unique identifier for every wireless
monitor.
Table des matières
