Marq Colormax PAR56 Manuel utilisateur

User Guide English (3–9)

Guía del usuario Español (10–16)

Guide d’utilisation Français (17–23)

Guida per l’uso Italiano (24–30)

Benutzerhandbuch Deutsch (31–37)

Appendix English (38)

User Guide (English)

Introduction

Box Contents

Colormax PAR56 User Guide

Power Cable Safety & Warranty Manual

Support

For the latest information about this product (documentation, technical specifications, system

requirements, compatibility information, etc.) and product registration, visit marqlighting.com.

For additional product support, visit marqlighting.com/support.

Safety Notes

Important: In addition to the notes below, please refer to the included safety & warranty manual for

additional safety information.

•Carry this product by a hanging/mounting bracket or the handle(s) only.

•Use this product indoors only (IP20). To prevent risk of fire or shock, do not expose this product

to rain or moisture.

•Do not use this product for permanent installations.

•Connect this product to grounded and protected circuits only.

•Always disconnect it from its power source before cleaning or replacing this product’s fuse.

Replace the fuse with another of the same type and rating.

•Before connecting the product to a power source, make sure the power cable is not crimped or

damaged.

•Make sure the power outlet’s voltage is within the range stated on this product (on its housing or

decal).

•Never connect this product to a dimmer or rheostat.

•Never disconnect this product from the power cable by pulling or tugging on the cable itself.

•Always make sure this product is used in a location with adequate ventilation with at least 20”

(50cm) from adjacent surfaces. Make sure none of this product’s ventilation slots are obstructed.

•Do not use this product at ambient temperatures higher than 104 °F / 40 °C.

•Do not allow flammable materials near this product during use.

•Do not look at the light source when the product is on.

•Do not touch this product while it is powered on or immediately after powering it off. The product

and its housing can reach high temperatures.

•If you encounter a serious problem while using this product, stop using it immediately.

•Do not open this product’s housing. It contains no user-serviceable parts and will void your warranty.

Features

Rear Panel

1. Power In: Use a standard power cable (included) to connect this input to a power outlet.

2. Fuse: This compartment holds the fuse. Before cleaning or replacing the fuse, disconnect

Colormax PAR56 from its power source. Use a screwdriver or other tool to remove the

compartment (do not pull it out by the tab only). Replace the fuse only with a new fuse with the

same rating (125 V, 1 A).

3. Power Out: Use a standard power cable to connect this output to an additional fixture. This

connection will supply power to the additional fixture when this one is connected a power outlet.

Please see Setup >Linking >Power for information about linking multiple fixtures.

Note: On models sold in the USA, this will be a standard “Edison” (NEMA) connection. On other

models, this will be a standard IEC connection.

4. DMX In: Use a standard 3-pin DMX cable to connect this input (A) to your DMX controller or (B)

to another fixture that will pass DMX data through it to this one. Colormax PAR56 receives DMX

data over this connection. Please see Setup >Linking >DMX for information about linking

multiple fixtures.

5. DMX Out: Use a standard 3-pin DMX cable to connect this output to an additional fixture.

Colormax PAR56 sends its data to an additional fixture over this connection. Please see Setup >

Linking >DMX for information about linking multiple fixtures.

6. Display: This display shows messages and values indicating the fixture’s current status.

7. Menu: Press this button to access Colormax PAR56’s menu.

8. Up/:Press this button to select the next-highest menu option or to increase the value by 1.

9. Down/:Press this button to select the next-lowest menu option or to decrease the value by 1.

10. Enter: Press this to confirm your current selection or value.

Setup

Note: Items not listed under the Introduction >Box Contents are sold separately.

Power Information

Before connecting the fixture to a power outlet, make sure the power cable is not crimped or

damaged. Also, make sure the power outlet’s voltage is within the range stated on this product (on

its housing or decal).

Before cleaning or replacing the fuse, disconnect Colormax PAR56 from its power source. Use a

screwdriver or other tool to remove the compartment (do not pull it out by the tab only). Replace the

fuse only with a new fuse with the same rating (125 V, 1 A).

Mounting/Rigging

Place the fixture on a flat, stable surface. Make sure all cables are secured and placed so that no one

will trip over them.

345

Clamp (not included)

Hanging Bracket (not included)

1/4-turn

(tighten until

secure)

Optional: Follow these steps to use

a hanging bracket (not included) for

mounting the fixture to a truss.

Linking

When using multiple Colormax PAR56 fixtures, you can link (“daisy-chain”) them so that each fixture

supplies power and/or sends DMX data to the next one. This helps reduce clutter in your cabling

and save you setup time.

You do not have to link fixtures for both power and DMX control; you can link them for either

purpose independently. For instance, you could link 6 fixtures together for DMX control while linking

only 3 of those same fixtures together for power (powering the other 3 fixtures separately).

Power

Use a standard IEC power cable to connect the Power Out of one fixture to the Power In of another.

As long as the first fixture is connected to a power outlet, any of the linked fixtures can remain off

and still supply power to the next one.

Important: To prevent undue damage to your fuses, we recommend linking no more than 31 fixtures

at 110 V or 58 fixtures at 240 V in the same chain.

DMX

Use a standard 3-pin DMX cable to connect the DMX Out of one fixture to the DMX In of another.

Your connected DMX controller will send its data to the fixtures in sequence. All fixtures in this chain

will receive all DMX data.

According to the DMX standard, you can link up to 25 fixtures with up to 6.6 feet (2 meters) between

each fixture, without amplification. Keep in mind the number of channels you are using as well as the

starting address.

Colormax PAR56

Power

DMX controller

Colormax PAR56 Colormax PAR56

Colormax PAR56 Colormax PAR56 Colormax PAR56

Operation

Menu Options

To use the menu:

•Press Enter to select a menu, setting, or option.

•Press Menu to return to the previous menu.

•Use the Up/and Down/buttons to change the currently shown setting or option.

Menu Settings/Values Subsettings/Subvalues

DMX Functions

ch08 001–512 8-channel operation + DMX starting address

ch05 001–512 5-channel operation + DMX starting address

ch03 001–512 3-channel operation + DMX starting address

See DMX Functions to learn about each mode of

operation.

Color Presets

C–01 – C–12 Static color presets, 1–12

See DMX Functions >8-Channel Operation >

Channel 6.

Color Programs

Pr01–Pr12 Color programs, 1–12

See DMX Functions >8-Channel Operation >

Channel 7.

Sound-Active

On, Off Sound-Active Mode, on or off

Sound Sensitivity

S000–S100 Microphone sensitivity for Sound-Active Mode, low

(S000) to high (S100)

Color-change rate for color programs, low (S000) to

high (S100)

Custom Color

r000–r100 Red dimmer, low (000) to high (100)

g000–g100 Green dimmer, low (000) to high (100)

b000–b100 Blue dimmer, low (000) to high (100)

Infrared

On, Off Infrared Mode, on or off

DMX Functions

You can control Colormax PAR56 by linking it to a DMX controller. See below for charts of the

available functions.

8-Channel Operation

Channel Function Value Description

1 Master Dimmer 000–255 Master dimmer, all colors, dark (000) to bright (255)

2 Red Dimmer 000–255 Red dimmer, linear, dark (000) to bright (255)

3 Green Dimmer 000–255 Green dimmer, linear, dark (000) to bright (255)

4 Blue Dimmer 000–255 Blue dimmer, linear, dark (000) to bright (255)

5 Strobe 000–015 No function

016–255 Strobe effect, slow (016) to fast (255)

6 Color Presets 000–015 No function (overrides Ch. 2–4)

016–035 Red

036–055 Green

056–075 Blue

076–095 Cyan

096–115 Yellow

116–135 Orange

136–155 Pink

156–175 Purple

176–195 Dark blue

196–215 Light cyan

216–235 White

236–255 Warm white

7 Color Programs 000–015 No function (overrides Ch. 2–4& Ch. 6)

016–035 Color Program 1 (3-color snap)

036–055 Color Program 2 (7-color snap)

056–075 Color Program 3 (3-color fade)

076–095 Color Program 4 (7-color fade)

096–115 Color Program 5 (3-color crossfade)

116–135 Color Program 6 (7-color crossfade)

136–155 Color Program 7 (red pulse)

156–175 Color Program 8 (green pulse)

176–195 Color Program 9 (blue pulse)

196–255 Sound-active colors

8-Channel Operation (continued)

Channel Function Value Description

8 Program Speed

(when Ch. 7 is set to 016–195)

000–255 Color-change rate, slow (000) to fast (255)

Microphone Sensitivity

(when Ch. 7 is set to 196–255)

000–255 Microphone sensitivity for sound-active programs,

low (000) to high (255)

5-Channel Operation

Channel Function Value Description

1 Master Dimmer 000–255 Master dimmer, all colors, dark (000) to bright (255)

2 Red Dimmer 000–255 Red dimmer, linear, dark (000) to bright (255)

3 Green Dimmer 000–255 Green dimmer, linear, dark (000) to bright (255)

4 Blue Dimmer 000–255 Blue dimmer, linear, dark (000) to bright (255)

5 Strobe 000–015 No function

016–255 Strobe effect, slow (016) to fast (255)

3-Channel Operation

Channel Function Value Description

1 Red Dimmer 000–255 Red dimmer, linear, dark (000) to bright (255)

2 Green Dimmer 000–255 Green dimmer, linear, dark (000) to bright (255)

3 Blue Dimmer 000–255 Blue dimmer, linear, dark (000) to bright (255)

Guía del usuario (Español)

Introducción

Contenido de la caja

Colormax PAR56 Guía del usuario

Cable de corriente Manual de seguridad y garantía

Soporte

Para obtener la información más reciente acerca de este producto (documentación, especificaciones

técnicas, requisitos de sistema, información de compatibilidad, etc.) y registrarlo, visite marqlighting.com.

Para obtener soporte adicional del producto, visite marqlighting.com/support.

Notas sobre la seguridad

Importante: Además de las notas a continuación, consulte el manual de seguridad y garantía

incluido para obtener información de seguridad adicional.

•Traslade este producto tomándolo solo de un soporte para colgar/montar o su manija/las manijas.

•Use este producto solo en interiores (IP20). Para evitar el riesgo de incendio o choque eléctrico,

no exponga este producto a la lluvia o a la humedad.

•No use este producto para instalaciones permanentes.

•Conecte este producto solo a circuitos protegidos y con descarga a tierra.

•Siempre desconecte el producto de su fuente de corriente antes de limpiarlo o reemplazar su

fusible. Remplace el fusible con otro del mismo tipo y capacidad.

•Antes de conectar el producto a una fuente de corriente, asegúrese de que el cable de corriente

no esté pinzado ni dañado.

•Asegúrese de que el voltaje de la toma de corriente se encuentre dentro del rango indicado en

este producto (en su carcasa o etiqueta).

•Nunca conecte este producto a un atenuador o reóstato.

•Nunca desconecte este producto tirando de su cable de corriente.

•Asegúrese de que este producto se use siempre en una ubicación con ventilación adecuada y al

menos 50 cm (20 pulg.) de distancia de superficies adyacentes. Asegúrese de que ninguna de

las ranuras de ventilación de este producto queden obstruidas.

•No use este producto a temperaturas ambientes superiores a 104 °F / 40 °C.

•No acerque materiales inflamables a este producto durante su uso.

•No mire directamente a la fuente de luz del producto cuando se encuentre encendido.

•No toque este producto mientras esté encendido o inmediatamente después de apagarlo. Este

producto y su carcasa pueden alcanzar temperaturas elevadas.

•Si se encuentra con un problema grave al usar este producto, deje de usarlo inmediatamente.

•No abra la carcasa de este producto. No contiene piezas reparables por el usuario y hacerlo

invalidará la garantía.

Autres manuels pour Colormax PAR56

Table des matières

Langues :

Autres manuels Marq Matériel de DJ

Marq

Marq colormax P18 Manuel utilisateur

Marq

Marq Onset 120WW Manuel utilisateur

Marq

Marq Onset 120 WW Manuel utilisateur

Marq

Marq Gesture Beam 102 Manuel utilisateur

Marq

Marq RezoTube Pack Manuel utilisateur

Marq

Marq Colormax Par64 Manuel utilisateur

Marq

Marq Gesture Beam 400 Manuel utilisateur

Marq

Marq FOG 400 LED Manuel utilisateur

Marq

Marq GESTURE BEAM 500 Manuel utilisateur

Marq

Marq Colormax Par64 Manuel utilisateur

Marq

Marq Gesture Spot 100 Manuel utilisateur

Marq

Marq SceniQ 2X2 Manuel utilisateur

Marq

Marq Colormax PAR56 Manuel utilisateur

Manuels Matériel de DJ populaires d'autres marques

ALPHA LITE

ALPHA LITE ALPHA 1500 Manuel du propriétaire

Chauvet

Chauvet OVATION E-930VW Manuel utilisateur

Zumtobel

Zumtobel APHRODITE Home Manuel utilisateur

Snow Masters

Snow Masters Zig Oscillator Manuel utilisateur

EuroLite

EuroLite 50530554 Manuel utilisateur

Beamz

Beamz BUV243 Manuel utilisateur

thomann

thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur

Eagletone

Eagletone 6 Eyes Flower Manuel utilisateur

EuroLite

EuroLite FLD-1508 Manuel utilisateur

Technical Pro

Technical Pro LG8xSEA Manuel utilisateur

JB Systems

JB Systems Lounge Laser DMX Manuel utilisateur

Lightmaxx

Lightmaxx Vega Halo 90 Manuel utilisateur

Elation

Elation FUZE WASH Z350 Manuel utilisateur

Maverick

Maverick MK3 WASH Manuel utilisateur

Infinity

Infinity TF-260C7 Fresnel Manuel utilisateur

Chauvet

Chauvet EVE E-50Z Manuel utilisateur

Eliminator Lighting

Eliminator Lighting E 138 Manuel utilisateur

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur