Marmitek IP EYE ANYWHERE 21 - SOFTWARE ULTRAVIEW Guide de configuration
IP EYE
A
NYWHER
E
IP EYE
ANYWHERE™
Network Camera
20240-20080117 • IP Eye Anywhere™
ALL RIGHTS RESERVED MARMITEK ©
ADVANCED GUIDE
IP Eye Anywhere - 1 -
PREFACE
Thank you for purchasing the Marmitek IP Eye Anywhere Network
Camera, a powerful and high-quality image network camera. The
camera can be installed as a standalone system within your application
environment easily and quickly, and supports remote management
function so that you can access and control it using a Web browser on
your PC.
This Advanced Installation Guide provides you with the instructions
and illustrations on how to use your camera, which includes:
Chapter 1 Introduction to Your Camera describes the features of
the camera. You will also know the components and
functions of the camera.
Chapter 2 Hardware Installation helps you install the camera
according to your application environment. You can use
this camera at home, at work, at any where you want.
Chapter 3 Accessing the Camera lets you start using your camera
without problem. The camera can be set up easily and
work within your network environment instantly.
Chapter 4 Configuring the Camera guides you through the
configuration of the camera using the web browser on your
PC.
Chapter 5 Appendix provides the specification of the camera and
some useful information for using your camera.
NOTE The illustrations and configuration values in this guide are for
reference only. The actual settings depend on your practical
application of the camera.
MARMITEK
- 2 -
Contents
PREFACE....................................................................................................... 1
CHAPTER 1 .................................................................................................. 3
INTR TION TO YOUR CAMERA ............................................. 3ODUC
1.1 CHECKING THE PACKAGE CONTENTS......................................................... 3
1.2 GETTING TO KNOW YOUR CAMERA............................................................ 4
1.3 FEATURES AND BENEFITS ......................................................................... 6
1.4 SYSTEM REQUIREMENT............................................................................. 8
CHAPTER 2 .................................................................................................. 9
HARDWARE INSTALLATION .............................................................. 9
2.1 INSTALLING THE CAMERA STAND ............................................................... 9
2.2 CONNECTING THE CAMERA TO LAN/WLAN ............................................. 10
2.3 APPLICATIONS OF THE CAMERA ............................................................... 11
CHAPTER 3 ................................................................................................ 12
ACCESSING THE CAMERA ............................................................... 12
3.1 USING IPFINDER ..................................................................................... 12
3.2 ACCESSING TO THE CAMERA ................................................................... 13
3.3 CONFIGURING THE IP ADDRESS OF THE PC ............................................. 16
CHAPTER 4 ................................................................................................ 17
CONFIGURING THE CAMERA.......................................................... 17
4.1 USING THE WEB CONFIGURATION............................................................ 17
4.2 USING SMART WIZARD............................................................................ 18
4.3 BASIC SETUP .......................................................................................... 21
4.4 NETWORK SETTINGS............................................................................... 23
4.5 SETTING UP VIDEO.................................................................................. 29
4.6 EVENT SERVER CONFIGURATION............................................................. 33
4.7 MOTION DETECT ..................................................................................... 36
4.8 EVENT CONFIG ....................................................................................... 37
4.9 TOOLS.................................................................................................... 40
4.10 USB* ..................................................................................................... 42
4.11 INFORMATION ......................................................................................... 44
CHAPTER 5 ................................................................................................ 45
APPENDIX ................................................................................................... 45
GLOSSARY OF TERMS ........................................................................................ 45
TECHNICAL SPECIFICATIONS IP ANYWHERE 10 ................................................... 54
TECHNICAL SPECIFICATIONS IP ANYWHERE 11 ................................................... 55
TECHNICAL SPECIFICATIONS IP ANYWHERE 20 ................................................... 56
TECHNICAL SPECIFICATIONS IP ANYWHERE 21 ................................................... 57
IP Eye Anywhere - 3 -
CHAPTER 1
INTRODUCTION TOYOUR CAMERA
1.1 Checking the Package Contents
Check the items contained in the package carefully. You should have
the following:
5One Marmitek IP Eye Anywhere Network Camera.
5One AC Power Adapter.
5One External Antenna (for IEA11 and IEA21 only).
5One Camera Stand.
5One Ethernet Cable (RJ-45 type).
5One Installation CD-ROM.
5One Quick Installation Guide.
NOTE Once any item contained is damaged or missing, contact the
authorized dealer of your locale.
1.2 Getting to Know Your Camera
Power LED indicates
the camera is powered
on with the steady
amber light.
Internal Microphone*
allows the camera to
receive sound and voice.
Link LED indicates
the camera’s network
connectivity with the
flashing green light.
Lens Assembly
USB Port* allows you
to connect an external
USB device.
It provides the power
distribution up to 500mA.
USB* Unmount Button
Is used to remove the
connected USB device
safely.
Front View
* Internal microphone and USB is supported by IEA20 and 21 only.
*The camera’s USB port supports WCN (Windows Connect Now)
technology, which allows you to use the notebook computer to set up
and store your wireless networking configuration on the USB storage
device, and then retrieve the wireless settings when you connect the
USB storage device to the camera.
NOTE After pressing the Unmount button for four seconds, the Power
LED starts flashing. When the Power LED resumes the steady
amber light, you can remove the USB device safely.
MARMITEK
- 4 -
External Antenna*
Screw Hole is used
to connect the camera
stand.
Ethernet Cable Connector
is used to connect the
network cable, which supports
the NWay protocol so that the
camera can detect the
network speed automatically.
DC Power Connector
is used to connect the
A
C power adapter, in
order to supply power
to the camera. Reset Button will restart
the camera when it is
pressed quickly; when it is
long pressed for five
seconds, the camera will
resume the factory default
settings.
Rear View
*IEA11 and IEA21 only.
IP Eye Anywhere - 5 -
MARMITEK
- 6 -
1.3 Features and Benefits
Surveillance Supported
Enable motion detection and setup automated email alerts and
upload FTP for security.
Remote Control Supported
By using a standard Web browser or the bundled UltraView
software application, the administrator can easily change the
configuration of the camera via Intranet or Internet. In addition, the
camera can be upgraded remotely when a new firmware is
available. The users are also allowed to monitor the image and
take snapshots via the network.
Multiple Platforms Supported
The camera supports multiple network protocols, including TCP/IP,
SMTP e-mail, HTTP, and other Internet related protocols.
Therefore, you can use the camera in a mixed operating system
environment, such as Windows 2000 and Windows XP.
Multiple Applications Supported
Through the remote access technology, you can use the cameras
to monitor various objects and places for your own purposes.
For example, babies at home, patients in the hospital, offices and
banks, and more. The camera can capture both still images and
video clips, so that you can keep the archives and restore them at
any time.
MPEG4/MJPEG Dual-codec Supported*
The camera provides you with excellent images by the
MPEG4/MJPEG dual-codec selectable technology, allowing you to
adjust image size and quality, and bit rate according to the
networking environment.
1-way Audio Capability*
IP Eye Anywhere - 7 -
The built-in microphone of the camera provides on-the-spot audio
via the Internet, allowing you to monitor the on-site voice.
Supports Multiple Profiles*
The camera supports multiple profiles simultaneously, so that you
can separately set up different image settings (such as image
quality and frame rate) for the three video types of the camera:
MPEG4, MJPEG, and 3GPP.
Supports RTSP*
The camera supports RTSP (Real Time Streaming Protocol),
which is a technology that allows you to view streaming media via
the network. You can view the real-time video with the Quick Time
player or RealPlayer. To view the real-time streaming image on
your computer, open the Web browser and enter the RTSP link:
rtsp://(IP address of the camera)/mpeg4.
Supports Connection to the External Devices*
With the USB connector, you can connect the camera to a variety
of external devices, such as an USB hard disk or memory stick.
* Supported by IEA 20 and 21 only.
MARMITEK
- 8 -
1.4 System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast Ethernet.
WLAN: IEEE 802.11b/g. (IEA 11, 21)
Accessing the Camera using Web Browser
Platform: Microsoft® Windows® 2000/XP/Vista/7
CPU: Intel Pentium III 350MHz or above (IEA 10, 11)
Intel Pentium III 800MHz or above (IEA 20, 21)
RAM: 128MB (IEA 10, 11)
512MB (IEA 20, 21)
Resolution: 800x600 or above
User Interface: Microsoft® Internet Explorer 6.0 or above
Apple Safari 2 or above
Mozilla Firefox 2.00 or above
Accessing the Camera using UltraView
Platform: Microsoft® Windows® 2000/XP/Vista/7.
Hardware Requirement:
1 camera connected: Intel Pentium III 800MHz; 512MB RAM
2 ~ 4 cameras connected: Intel Pentium 4 1.3GHz; 512MB RAM
5 ~ 8 cameras connected: Intel Pentium 4 2.4GHz; 1GB RAM
9 ~ 16 cameras connected: Intel Pentium 4 3.4GHz; 2GB RAM
Resolution: 1024x768 or above
NOTE If you connect multiple cameras to monitor various places
simultaneously, you are recommended to use a computer with
higher performance.
CHAPTER 2
HARDWARE INSTALLATION
2.1 Installing the Camera Stand
The Marmitek IP Eye Anywhere camera comes with a camera stand,
which uses a swivel ball screw head to lock to the camera’s screw hole.
When the camera stand is attached, you can place the camera
anywhere by mounting the camera through the three screw holes
located in the base of the camera stand.
The Camera Stand
IP Eye Anywhere - 9 -
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Marmitek Caméra de sécurité
Marmitek
Marmitek Gigacam none Manuel utilisateur
Marmitek
Marmitek IP EYE ANYWHERE - QUICK Manuel utilisateur
Marmitek
Marmitek SD Memory CAM2 Manuel utilisateur
Marmitek
Marmitek IP EYE ANYWHERE 470 - ADVANCED Manuel utilisateur
Marmitek
Marmitek MEGACAM4 Manuel utilisateur
Marmitek
Marmitek MEGACAM1 Manuel utilisateur
Marmitek
Marmitek IP RoboCam541 Guide de configuration
Marmitek
Marmitek IP EYE ANYWHERE 10 - ADVANCED Manuel utilisateur
Marmitek
Marmitek IP EYE ANYWHERE 470 - ADVANCED Manuel utilisateur
