Markant MATRIX PRO Manuel utilisateur

Matrix Pro

Memory Display

Manual

Initialization procedure 3

Move up or down 3

Set memory positions 1/2/3 4

Keep pressing memory position 1/2/3 4

One key to transfer the memory position 1/2/3 4

The function of position saved with one-key move up and down switch 5

Top or bottom stroke limit 5-6

Unlock the stroke 6

Toggle the display unit format 6

Verify the display switch data to table height 7

The function of position saved with one 8

Error code 9

Contents

STEP 1

›Press and hold & simultaneously for more than 3 seconds.

Legs begin to move down at half speed of normal operation.

STEP 2

›Keep pressing & .

Legs move down to the lowest position and rebound 2-5 mm, then stop.

STEP 3

›Release & together.

Initialization is completed.

STEP 1:

›Touch and hold .

Legs move up.

STEP 2:

›Touch and hold .

Legs stop.



or parts replaced.

2) If the initialization process is interrupted, the system will stop running and will need to be

reinitialized to operate again.

Initialization procedure

Move up & down

Up Key Down Key S KeyScreen

Attention

STEP 3:

›Touch and hold .

Legs move down.

STEP 4:

›Touch and hold .

Legs stop.

STEP 1:

›Press and hold or and then release.

Run the legs to the position you want the table-top to be.

STEP 2:

›Click button and then click button , or within next 3 seconds.

Position 1,2 or 3 is saved.

STEP 1

›Press and hold the button , or .

Legs return to the corresponding position saved.

STEP 1

›Quickly click button , or .

Legs return to the corresponding position saved.

1) Memory location elimination after initialization.

2) Memory can be recovered.

Set memory positions 1/2/3

Keep pressing memory position 1/2/3

One key to transfer the memory position 1/2/3

STEP 1:

›Touch and hold button for more than 10 seconds.



STEP 2:

›Release button , touch button within 3 seconds.

!"#$

STEP 3:

›Touch and 

%&#$&#

STEP 4:

›Touch and hold button for 2 seconds.

%!"#$'

STEP 1:

›Press and hold or , then release.

Run the legs to the position you want the table-top to be.

STEP 2:

›Press and hold button , then press and hold for about 3 seconds.

((

the table can be moved to.

STEP 3:

›Release buttons.

Completed.

!"

The function of position saved with one-key move up and down switch

Top or bottom stroke limit (Lock the top stroke limit)

Attention

STEP 1:

›Press and hold or , then release.

Run the legs to the position you want the table-top to be.

STEP 2:

›Press and hold button , then press and hold for about 3 seconds.

((

be moved to.

STEP 3

›Release buttons.

Completed.

STEP 1:

›Press and hold button , then press and hold , keep for about 3 seconds.

()*!#

STEP 2:

›Release the buttons.

Completed.

1) Legs aren't able to run below the locked position.

2) Memory position(s) are/is above the locked position will be lost even after the table is

unlocked, you need to follow Set memory positions again to reset these memory positions.

3) Initialize switch will not unlock the bottom limit.

Top or bottom stroke limit (Lock the bottom stroke limit)

Unlock the stroke

STEP 1:

›Press and hold button , then press and hold , for about 3 seconds.

The height information will be changed between centimeters and inches.

STEP 2:

›Release the buttons.

Completed.

STEP 1:

›Set the table at any height, recommended at the bottom position.

Measure the table actual height and write down the number in inches or in centimeters.

STEP 2:

›Press and hold button , then press and hold for about 3 seconds.

'

STEP 3:

›Release the buttons, then click or 

''

STEP 4:

›Click button .



STEP 5:

›Click or to change the number.

The second number is being increased or decreased to the second number you measured.

STEP 6:

›Click button .



STEP 7:

›Click or to change the number.

The third number is being increased or decreased to the third number you measured.

STEP 8:

›Click button .

Completed.

1) In inch format, the minimum height variation as the legs move up and down is 0.5 inches,

while in centimeter format is 1 centimeter.

Toggle the display unit format

Verify the display switch data to table height

Attention

1) Check the switch display format in inches or in centimeters and toggle to the unit you like

and match to the actual measurement. In inch format, the minimum adjustable height is 0.5

inches, while in centimeter format is 1 centimeter.

Attention

STEP 1:

›Touch and hold button for more than 10 seconds.



STEP 2:

›Release button , touch button within 3 seconds.

!"#$

STEP 3:

›Touch or to change the current clamp force sensitivity level.

+!!##'!!#

!/046(!6!

STEP 4:

›Touch button for 2 seconds.

Completed.

The function of position saved with one-key move up and down switch

Error Code Error Reason Decision Criteria Troubleshooting Solution

E01 Leg

Malfunction

The leg is disconnected from

the control box, screen

displays E01.

1. Legs loosed to the control box, check the cable

connection.

2. Inner parts of legs are broken, replace the legs.

E03 Table-top

overload

The table top load exceeds

the control box's rated load,

screen displays E03.

1. Too many loads on the table-top, remove the

loads.

E04 Control box

malfunction

Control box malfunction,

screen displays E04.

1. Under extreme environment, operating will

cause the control box malfunction, initial proce-

dure needed.

2. Discontinue the initialize process will cause the

control box malfunction,reinitialize needed.

E05 Button of

switch stuck

The handset lasted 30

seconds, and the key value

was unchanged.

Screen displays E05.

1. Button of switch stuck, check the status of the

button, if stuck then toggle the button to restore.

2. Replace the switch.

E06 Communication

disconnected

The handset has been unable

to receive data for 5s, screen

displays E06.

1. Disconnection between switch and control box,

ensure the connection correctly.

2. Check the control box warranty.

E07 Lower setting of

switch verifying

height

The setting height of the

handset is lower than 0,

screen displays E07.

1. Switch setting height is low, the height value is

below 0, needs to adjust the height, lift the table.

E08 Motor short

circuit

Motor cable damaged result-

ing in short circuit, screen

displays E08.

1. Check whether the motor cable is damaged, and

replace the motor cable if necessary.

2. Power on again. If the fault does not disappear,

check whether the motor is working properly.

E09 HALL error HALL count error, screen

displays E09.

1. Reinitialization can be used normally.

E10 Actuator error The actuator part of control

box failure, screen displays

E10.

1. Disconnect the power supply to cool the control

box for 1 minute and the re power it. Replace the

control box if the fault does not disappear.

Error code

Witteveen Projectinrichting

Ouderkerk a/d Amstel

Tel: 020 - 496 5030

[email protected]

www.staand-werken.nl

www.project-inrichting.nl

Autres manuels pour MATRIX PRO

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Markant Ordinateur de bureau

Markant

Markant MAX 2.5 Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur