1. Input Jack. This ¼'' jack accepts the output from the guitar.
2. GAIN control of equal Channel I and Channel II control panels. This control
adjusts the amount of drive for Channel I (Channel II). Higher settings of this
control increase additional harmonics and sustain.
3. BASS, MID, and TREBLE controls. These controls represent an
equalization section of Channel I or Channel II.
4. VOLUME control. Adjusts the overal volume of the Channel.
5. CHANNEL SELECT switch. Each Channel section has its own channel
selectswitch to select one of the four channels as desired.
6. BRIGHT switch. Three-position high-end boost (center = off, left = bright,
right = brighter).
7. Channel ON indicator. Each channel has its own “on” indicator which lights
when the channel is selected. Channel I –green, Channel II –blue, Channel
III –yellow, Channel IV –red.
8. GAIN control of equal Channel III and Channel IV control panels. This
control adjusts the amount of drive for Channel III (Channel IV). Higher
settings of this control increase distortion and sustain.
9. BASS, MID and TREBLE controls. These controls represent an
equalization section of Channel III or Channel IV.
10. PRESENCE and ANGLE controls. These controls add yet another
dimension to powerful equalization groups of controls. Channel IV has
ANGLE control which was intended as custom option. Here it works as
PRESENCE like on Channel III.
11. VOLUME control. Adjusts the overal volume of the Channel.
