Marantz SR7010 Manuel utilisateur
MODEL: SR7010
Model Information
INTEGRATED NETWORK AV RECEIVER
MI112116E3-1
I/R Codes
Product Specifications
Upgrades/Updates
Accessories
Reset Procedure
Warranty
Remote Control
Rear Panel
Front Panel
NOTE:
This edition is missing the link to the IR codes…………………………………………………………………….. 11/21/2016
Model Information
Index
Protection History
Display Mode
Front Panel
Power operation button ( )
Used to turn the power of the MAIN ZONE
(room where this unit is located) on/off
(standby).
Power indicator
This is lit as follows according to the power status:
•Off: Power on
•Red: Normal standby
•Orange:
•When “HDMI Pass Through” is set to “On”
•When “HDMI Control” is set to “On”
•When “IP Control” is set to “Always On”
HOME Buttons and Display exposed when the door is
Open (1 of 3) 2
INPUT SELECTOR knob
This selects the input source.
Main display
This displays various pieces of information.
Remote control sensor
This receives signals from the remote control unit.
VOLUME knob
This adjusts the volume level.
Door
When you are using buttons and/or connectors
behind the door, press the bottom of the door to
open it. Be careful not to catch your fingers
when closing the door.
3
4
5
6
7
A-DSX
WithThe Door Open (1 of 3)
HOME
FRONT PANEL Buttons and Display exposed when the door is
Open (2 of 3) 3
Sub display
This displays various pieces of information.
BACK button
This returns to the previous screen.
Cursor buttons ()
These select items.
ENTER button
This determines the selection.
SETUP button
This displays the menu on the TV screen.
DYNAMIC EQ button
This switches the Dynamic EQ settings.
PURE DIRECT button/indicator
This switches the sound mode between Direct, Pure Direct and
Auto.
This lights when the Pure Direct mode is selected as the sound
mode.
M-DAX button/indicator
This enables the M-DAX mode.
This lights when the M-DAX mode is selected.
Dynamic Volume button (DYNAMIC VOL)
This switches the Dynamic Volume settings.
3
4
5
6
7
8
9
1
2
WithThe Door Open (2 of 3)
HOME Buttons and Display exposed when the door is
Open (3 of 3)
Buttons and Display exposed when the door is
Open (2 of 3) 4
MOVIE button
This switches the sound mode to “Movie”.
MUSIC button
This switches the sound mode to “Music”.
GAME button
This switches the sound mode to “Game”.
Audyssey DSX® button (A-DSX)
This switches the Audyssey DSX® settings.
Speaker A/B switching button (SPKR A/B)
This sets the front speakers to use.
HDMI OUT button
This sets the HDMI monitor output.
DIMMER button
Each press of this switches the brightness of the display.
STATUS button
Each press of this switches the status information that is
shown on the display.
10
11
12
13
14
15
16
17
WithThe Door Open (3 of 3)
HOME DISPLAY
Buttons and Display exposed when the door is
Open (3 of 3) 5
ZONE SELECT button
These switch the zone (MAIN ZONE, ZONE2, ZONE3) that is operated
through the remote control unit.
ZONE2 ON/OFF button
This turns the power of ZONE2 on/off.
ZONE3 ON/OFF button
This turns the power of ZONE3 on/off.
Headphones jack (PHONES)
This is used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers or from the PRE OUT connectors.
NOTE: To prevent hearing loss, do not raise the volume level excessively
when using headphones.
SETUP MIC jack
This is used to connect the supplied Sound calibration
microphone.
USB port (T)
This is used to connect USB storages (such as USB
memory devices).
AUX1-HDMI connector
This is used to connect HDMI output compatible
devices such as video camcorders and game consoles.
AUX1 INPUT connectors
Used to connect analog output compatible devices
such as video camcorders and game consoles.
18
19
20
21
22
23
24
25
Main Display (1 of 2)
HOME MAIN DISPLAY (1 of 2)
Buttons and Display exposed when the door is
Open (3 of 3) 6
A Light illumination
When the power to this device is switched on, the
surrounding area is lit blue. The settings can be changed so
the light does not switch on.
Volume indicator
Input source indicator
The currently selected input source name is displayed.
If the input source name has been changed using “Source
Rename” in the menu, the input source name after the
change is displayed.
Standard display Tuner display
These light up according to the reception conditions
when the input source is set to “HD Radio”.
Lights up when the broadcast is properly tuned in.
In the FM mode, this lights up when receiving stereo
broadcasts.
Main display
The input source name, sound mode, setting values and other information are displayed here.
1
2
34
5
Main Display (2 of 2)
HOME SUB DISPLAYMAIN DISPLAY (2 of 2) 7
This lights when the sleep mode is selected.
ZONE2/ZONE3 power on displaySleep timer indicator
This lights up when ZONE2 (separate room) power
is turned on.
This lights up when ZONE3 (separate room) power
is turn
67
8
Sub Display
Input signal indicators
The respective indicator will light corresponding to the input signal.
Decoder indicators
These light when Dolby or DTS signals are input or when the Dolby or DTS
decoder is running.
Audyssey®indicator
This lights when “MultEQ®XT32”, “Dynamic EQ”, “Dynamic Volume”,
“Audyssey DSX®” or “Audyssey LFCTM” is set.
Tuner reception mode indicators
These light up according to the reception conditions when the input source is
set to “HD Radio”.
TUNED: Lights up when the broadcast is properly tuned in.
STEREO: Lights up when receiving FM stereo broadcasts.
Monitor output indicator
These light according to the HDMI monitor output setting. When set to
“Auto(Dual)”, the indicators light according to connection status.
MULTI ZONE indicator
This lights up when ZONE2 or ZONE3 (separate room) power is turned on.
Sleep timer indicator
This lights when the sleep mode is selected.
MUTE indicator
This blinks while the sound is muted. link,
Volume indicator
Information display
The input source name, sound mode, setting values and
other information are displayed here.
Front speaker indicator
This lights according to the setting of the front A and B
speakers.
Input/output signal channel indicators
The channel for input/output signals is displayed according to
the setting configured for “Channel Indicators”.
•When “Channel Indicators” is set to “Output” (Default)
These light when audio signals are being output from the
speakers.
•When “Channel Indicators” is set to “Input” These light
corresponding to the channels that include the input
signals.
When playing HD Audio sources, the EXT indicator lights
when a signal from an extension channel (a channel other
than the front, center, surround, surround back, front height,
front wide or LFE channel) is input.
123456789
HOME REAR PANEL 1MAIN DISPLAY (2 of 2) 8
Rear Panel (1 of 3)
HOME
Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for
Bluetooth/wireless connectivity when connecting to a
network via wireless LAN, or when connecting to a handheld
device via Bluetooth.
•Place the external antennas for Bluetooth/wireless
connectivity evenly over the screw terminal of rear.
•Turn clockwise until the antennas is fully connected.
•Rotate the antenna upwards for best reception.
REAR PANEL (2 of 3)SUB DISPLAY 9
12
3
4
DC OUT jacks
Used to connect devices equipped with the trigger function.
Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
“Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)”
“Connection 3 : TV equipped without an HDMI connector”
“Connecting a set-top box (Satellite tuner/cable TV)”
“Connecting a DVD player or Blu-ray Disc player”
RS-232C connector
Used to connect home automation controller devices fitted with
RS-232C connectors. Consult the owner’s manual of the home
automation controller for more information about serial control of
this unit.
Perform the operation below beforehand.
1. Turn on the power of this unit.
2. Turn off the power of this unit from the external controller.
3. Check that the unit is in the standby mode.
HOME
Rear Panel (2 of 3)
REAR PANEL (3 of 3)REAR PANEL (1 of 3) 10
FLASHER IN jack
Used when using a control BOX or other such control devices
to control
this unit.
SIGNAL GND terminal
Used to connect a ground wire for the turntable.
network.
REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to
operate this unit and external devices from a different room.
Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
“Connection 3 : TV equipped without an HDMI connector”.
“Connecting a set-top box (Satellite tuner/cable TV)”
“Connecting a DVD player or Blu-ray Disc player”.
HDMI connectors
Used to connect devices equipped with HDMI connectors.
“Connection 1 : TV equipped with an HDMI connector and
compatible with the ARC (Audio Return Channel)”.
“Connection 2 : TV equipped with an HDMI connector and
incompatible with the ARC (Audio Return Channel)”.
“Connecting a set-top box (Satellite tuner/cable TV)”
“Connecting a DVD player or Blu-ray Disc player”.
NETWORK connector
Used to connect to a LAN cable when connecting to a wired
LAN
AC inlet (AC IN)
Used to connect the power cord.
5
6
7
8
9
10
11
Autres manuels pour SR7010
6
Table des matières
Autres manuels Marantz Récepteur
Marantz
Marantz SR6005 Manuel utilisateur
Marantz
Marantz SR5007 Manuel utilisateur
Marantz
Marantz NR1200 Manuel utilisateur
Marantz
Marantz NR1504 Guide de démarrage rapide
Marantz
Marantz SR7500/A1B Manuel utilisateur
Marantz
Marantz SR-8001 Manuel utilisateur
Marantz
Marantz NR1604 Manuel utilisateur
Marantz
Marantz SR5400 Manuel utilisateur
Marantz
Marantz SR5010 Manuel utilisateur
Marantz
Marantz SR5001/F Manuel utilisateur
Marantz
Marantz SR5008 Guide de l'utilisateur
Marantz
Marantz RX101 Manuel utilisateur
Marantz
Marantz SR7008 Manuel utilisateur
Marantz
Marantz QUADRADIAL 4 Manuel utilisateur
Marantz
Marantz NR1504 Manuel utilisateur
Marantz
Marantz SR6003 Manuel utilisateur
Marantz
Marantz SR5004 Manuel utilisateur
Marantz
Marantz SR4600 Manuel utilisateur
Marantz
Marantz SR7008 Guide de démarrage rapide
Marantz
Marantz 2215 Manuel utilisateur
