Mantion WIDOOR Manuel utilisateur

INSTALLATION INSTRUCTIONS

DOOR MOTOR

WIDOOR

VERSION 3-02 EN

2, rue des Métiers

21110 –Genlis

Tel.: (33) 03 80 37 85 71

http://www.mantion-smt.fr

GUARANTEE - IMPORTANT SAFETY INSTRUCTIONS.

These instructions must be followed in the interest of personal safety; Keep these

instructions.

This motorization is exclusively designed for opening and closing sliding internal doors. It must not

be used for any purpose other than that specified in these instructions. The manufacturer or

supplier shall not be liable for any damage resulting from improper use thereof. The user alone

shall be solely liable and assume any risks arising from improper use of the product.

This door motor must be installed by persons fully aware of the hazards involved with electric

currents, and having all qualifications to work on domestic installations in accordance with good

practice.

Follow all these instructions because faulty installation can cause injuries.

The assembly steps must be followed, as must the operating instructions, and safety rules must

always be heeded.

Before installing the door motor, check that both the driven part and the supplied motor are in

good mechanical condition; and that the structure has the necessary load-bearing capacity for our

product in its entirety.

The electrical installation must be done according to prevailing national standards. The power

supply must be compatible with our product (voltage and frequency as specified on the product)

Do not connect the device without first checking that the control circuit is disconnected from the

power supply.

Check the installation frequently to detect any signs of wear and tear or damage. Do not use the

device if it needs repairing or adjusting.

Always disconnect the power supply when cleaning or carrying out any maintenance or servicing

tasks on the product.

Never modify or fit any additional parts to the device that may compromise safety without

MANTION SMT's written permission.

The user alone is solely and entirely responsible for any breach of these safety rules, and any

damage resulting therefrom.

The product must be stored indoors in a dry place at a temperature of between 0 °C and +50 °C.

When fitting it, the installation engineer must heed accident prevention instructions and the

standards in force in the country.

Do not immerse the gear motor in water or splash it.

Do not dispose of it in fire or bring it into contact with flame or any heat source.

Do not use household products or chemicals to clean it.

Do not dispose of the packaging in the environment; treat waste according to the standards in

force in the country.

Keep products, devices and documentation out of reach of children.

Do not let children play with the fixed control devices. Keep remote controls out of reach of

children.

This product may be used by children over the age of 8 and by persons with reduced physical,

sensory or mental capabilities, or inexperienced persons, if they are properly supervised, or they have

been given proper instructions on the safe use of the product, and possible risks have been removed.

Children must not play with the product. Cleaning and maintenance must not be carried out by

children, without supervision.

The manufacturer or supplier shall not be liable for any damage resulting from any other use of the

product. If replacing the product, only use MANTION SMT or MANTION SMT-approved products.

Terms of the guarantee

MANTION SMT products come with a 5 (five) year guarantee from the date of delivery.

The guarantee is limited, as decided by MANTION SMT, either to replacement or to repair of

products that MANTION SMT recognizes as faulty, with the proviso that:

1. Subject to MANTION SMT's written permission to return the products, the said products are

returned to MANTION SMT forthwith with the details of the fault and a copy of the

installation engineer or dealer's bill stating the date of installation.

2. The products have been stored, installed, maintained and used in accordance with

MANTION SMT's instructions and specifications.

The guarantee is strictly limited to the provisions of this clause, and any other guarantee or

liability, including loss of profits or damage directly or indirectly resulting from the sale or use of the

products, is excluded.

MANTION SMT shall in any event only be liable for the motorization. The guarantee does not

apply in case of overvoltage or short-circuiting resulting for instance from connection errors,

weather conditions such as lightning, etc. The guarantee does not cover normal wear.

Summary:

1. Technical characteristics...........................................................................................................5

2. Kit contents................................................................................................................................7

3. Installation diagram ...................................................................................................................7

4. Pre-installation checking............................................................................................................8

5. Motor installation .......................................................................................................................9

5.1. Gear motor establishment............................................................................................................................ 9

5.2. Belt fixing on the door (not included).........................................................................................................10

5.3. Free pulley installation (not included) ........................................................................................................ 10

6. Electrical connection................................................................................................................11

6.1. External accessories connection ................................................................................................................. 12

6.2. Peripherals connections.............................................................................................................................. 13

6.3. Power supply connection (terminal C1)...................................................................................................... 14

7. Protection cover installation.....................................................................................................16

8. Operating modes.....................................................................................................................17

8.1. Switches settings......................................................................................................................................... 17

8.2. Closing modes ............................................................................................................................................. 17

9. Bringing into service................................................................................................................18

10. Parameters settings.............................................................................................................19

10.1. Peering a smartphone............................................................................................................................. 19

10.2. Disabling all smartphones .......................................................................................................................19

10.3. Adjustable parameters via mobile application .......................................................................................19

11. Wireless setup instructions (Radio product only) .................................................................20

11.1. Radio specifications.................................................................................................................................20

11.2. Peering a switch or a remote control (transmitter)................................................................................ 20

11.3. Disabling a switch or a remote control (transmitter) .............................................................................21

11.4. Disabling all transmitters (switches, remote control, etc.)..................................................................... 21

11.5. Other informations .................................................................................................................................21

12. Further information...............................................................................................................22

12.1. LED color code......................................................................................................................................... 22

12.2. Restart after power outage.....................................................................................................................22

12.3. Obstacle detection .................................................................................................................................. 22

13. Diagnostic aid.......................................................................................................................23

1. Technical characteristics

This product is used for opening and closing automatically sliding doors (one or two doors). It is

designed for domestic or professional use.

General informations

Reference

K0000256 –Wire control

K0000266 –Radio control

Designation

Sliding door motorization

Technology

Belt transmission

Connectivity

Radio (433,92 MHz) / Bluetooth (BLE4.1)

Size

L= 150 mm, T= 45 mm, H= 205 mm

Maximum weight per door

10 –80 kg or 10 –50 kg for double doors

Max speed

350 mm/s *

Max distance

6 m

Frequency of use

500 cycles per day (maximal recommended)

Guarantee

5 years

* Measure is given for indicative purpose, using a 50kg door.

Electrical

Power Supply

80 –264 VAC

Frequency

47 –63 Hz

Nominal Power

65 W

Current max

1,5 A at 115 VAC / 1 A at 230 VAC

Isolation class

Class II

Protection

Internal fuse 2,5 AT

Recommended power cable

3G0,75 mm² for a maximum length of 20 m

Environment

Protection rating

IP 20

Operating temperature

+5 °C < T < +40 °C

Options

Command

Wired: push button or radar

Radio: transmitter 433 MHz

Command and parameter

setting

Smartphone application (Android or IOS)

Lock output

Allow to plug a locker (24 VDC, 500 mA max.)

Safety input

Allow to plug a safety input

Setting Parameters

Max opening speed

50 mm/s –350 mm/s *

Max closing speed

50 mm/s –200 mm/s *

End opening speed

End closing speed

Increase or decrease the speed at the end position

Deceleration at the opening

Adjust the deceleration according to the weight of the

door

Timer before closing the door

0 s –60 s

* Measure is given for indicative purpose, using a 50kg door.

Normative / directive compliance

Equipment safety

EN60335-1, EN60335-2

People security

Obstacle detection

impact force < requirement of the standard EN16005

EMC

EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4

ROHS Directive

2002/95/C

2. Kit contents

Motorization

Screws and

adhesive band

Electrical

terminal

Protection

cover

3. Installation diagram

Recommended components (not included):

x 4

Fixing bracket

Free pulley

Stoppers x 2

Belt

Track

4. Pre-installation checking

Operating reserve: 150 mm in width and 45 mm for thickness.

Do not use locking stoppers.

150 mm min

70 to 77 mm

45 mm min

Porte

5. Motor installation

5.1. Gear motor establishment

In the track, slide the nuts fixing the system.

Tighten the two M6 screws.

Note: if the motorization is between walls, put adhesive bands.

Nuts x 2

M6 screws

5.2. Belt fixing on the door (not included)

5.3. Free pulley installation (not included)

Table des matières

Manuels Moteur populaires d'autres marques

Rotax

Rotax 125 senior MAX evo Manuel utilisateur

Kohler

Kohler K361 Manuel utilisateur

MTD

MTD OHV Series Manuel utilisateur

Kohler

Kohler COMMAND CH18-745 Manuel utilisateur

Mercury

Mercury D4.2L D-Tronic Manuel utilisateur

Selve

Selve SE Plus-RC Series Manuel utilisateur

Perkins

Perkins 1206E-E66TA Manuel utilisateur

Skov

Skov DA 174 Manuel

Rossi

Rossi TX11 Series Manuel utilisateur

Siemens

Siemens SIMOTICS T-1FW3 Feuille d'instructions

AL-KO

AL-KO PRO 350 Manuel utilisateur

MTU

MTU 12 V 4000 Lx4 Manuel utilisateur

Nanni

Nanni N3.30 Manuel d'instructions

Nanni

Nanni N5.160 CR2 Manuel utilisateur

KSB

KSB SuPreme Series Instructions d'installation

Hiwin

Hiwin EM1 Series Manuel utilisateur

Rotax

Rotax 912 i series Mode d'emploi

Siemens

Siemens SIMOTICS XP 1MB1 Manuel utilisateur