Manitowoc 7626473 Mode d’emploi

7626473 LOW PRESSURE CONTROL

Installation/Adjustment Instructions

1Remove ice sensor probe. Do not reuse. Sensor probe is not used, when low pressure control is installed.

2Cut flare nut off low pressure control. Using new copper tee, install low pressure cap tube into ice machine

refrigeration system at the line going to the low side suction service valve. IMPORTANT: Follow instructions

outlined in Service Bulletin, SB-73-93, to install pressure control without removing refrigerant from the ice

machine.

3Connect new wire harness from control board terminals, 1C and 1D (B and J-models), and 20 and 21 (E and G-

models), to low pressure control using brass screws.

4Using bracket supplied, mount the low pressure control in the “compressor compartment area” to the bulkhead wall,

corner post, or other convenient location. Do not mount low pressure control in “evaporator area”.

5Set low pressure control for proper ice thickness:

A. Set differential at 10 psi. This will never change.

B. Start by setting the cutout (high event) at 36 psi.

C. Start the ice machine and check for proper 1/8” bridge thickness.

D. If ice is too thin, increase ice thickness by lowering cutout (high event) set point. Make adjustments in 2 psi

increments.

E. If ice is too thick, decrease thickness by raising cutout (high event) set point. Make adjustments in 2 psi

increments.

F. Do not change 10 psi differential setting.

G. All future ice thickness adjustments must now be made by adjusting the low pressure control cutout (high event)

setting.

Manitowoc Ice, Inc.

2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA 8010593

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 Rev. 11/04/97

Table des matières

Autres manuels Manitowoc Accessoires

Manitowoc

Manitowoc K00017 Manuel utilisateur

Manitowoc

Manitowoc K00214 Manuel utilisateur

Manitowoc

Manitowoc Marine Q 1300 Manuel utilisateur

Manitowoc

Manitowoc K00067 Manuel utilisateur

Manitowoc

Manitowoc K00105 Manuel utilisateur

Manitowoc

Manitowoc K00156 Manuel utilisateur

Manitowoc

Manitowoc K00055 Manuel utilisateur

Manitowoc

Manitowoc QM45 Series Manuel

Manitowoc

Manitowoc K00221 Manuel utilisateur

Manitowoc

Manitowoc G-1700 Manuel utilisateur

Manitowoc

Manitowoc IB-0620 Manuel utilisateur

Manitowoc

Manitowoc K00333 Manuel utilisateur

Manitowoc

Manitowoc K00179 Manuel utilisateur

Manitowoc

Manitowoc 7603323 Manuel utilisateur

Manitowoc

Manitowoc RF0300 Manuel utilisateur

Manitowoc

Manitowoc K00047 Manuel utilisateur

Manitowoc

Manitowoc K00346 Manuel utilisateur

Manitowoc

Manitowoc K00099 Manuel utilisateur

Manitowoc

Manitowoc Q-1809 Mode d’emploi

Manitowoc

Manitowoc 7623123 Manuel utilisateur

Manitowoc

Manitowoc K00368 Manuel utilisateur

Manitowoc

Manitowoc K00344 Manuel utilisateur

Manitowoc

Manitowoc Marine Q 1000 Manuel utilisateur

Manitowoc

Manitowoc SD0672C Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur