Manhattan 451147 Manuel utilisateur

HARD DRIVE

DOCKING KIT

USER

MANUAL

Models 451147

& 451154

MAN-451147/451154-UM-0408-01

Model 451147

Model 451154

INTRODUCTION

Thank you for purchasing the MANHATTAN

Hard Drive Docking Kit,

Model 451147 (aluminum and plastic case) or Model 451154 (plastic

case).

The easy-to-follow instructions in this user manual help make setup

and operation quick and simple, so you’ll also soon be enjoying the

benets of these additional features:

• Easily converts any 3.5” SATA hard drive into a portable storage

solution — installs into any 5.25” bay

• Supports data transfer rates of up to 3 Gbps

• Ideal for securing and transporting data between multiple locations

and PCs; hot-swappable

• Electronic lock disconnects power for safe removal and helps reduce

unauthorized access, drive damage and data loss

• Built-in cooling fan maximizes airow and cooling efciency

• Anti-vibration construction help shield drive from shock

• Lifetime Warranty

System Requirements

• Available 12 V Molex power and SATA L-type data connections

• Windows 2000/XP or MAC OS version 8.6 or above

Package Contents

• Hard Drive Docking Kit with mounting screws

• User manual

HARDWARE INSTALLATION

The MANHATTAN Hard Drive Docking Kit is designed for installation

in most PC cases with an available 5.25-inch drive bay. Generalized

instructions for installation are presented in this manual since the design

of computer cases varies. Refer to your computer’s manual whenever

in doubt about procedures.

This Hard Drive Docking Kit is composed of two components: the docking

case (above) and the drive case (below, with cover removed).

Key lock

Power LED

Drive Activity LED

SATA Data

Connector SATA Power

Connector

Diagrams are representational

of the entire line of MANHATTAN

docking kits and may not depict

specic cables/connectors.

Installing the Docking Case

1. Turn off the power to your computer and any other connected peripheral

devices. Follow these precautions for static electricity discharge:

• Discharge any static electricity buildup in your body by touching a

grounded metal surface such as the computer case, if plugged in.

• During installation procedures, avoid any contact with internal device

parts.

2. Unplug the power cord from the back of the computer.

3. Remove your computer’s cover.

4. Remove the computer’s front cover plate from the 5.25-inch drive bay

in which you plan to install your MANHATTAN Hard Drive Docking Kit.

5. Remove (separate) the drive case from the docking case by lifting the

handle and pulling it out.

6. Slide the docking case into the 5.25-inch drive bay.

7. Attach the SATA cable from the computer to the SATA connector on the

back of the docking case.

8. Attach an available 4-pin power cable from the system’s power supply

to the 4-pin connector on the back of the docking case. The power

connector is “D”-shaped to ensure proper orientation when making

the connection. (See image below.)

9. Replace the computer’s cover; reconnect the power and other external

cabling.

Mounting a Drive in the Drive Case

These steps are for installing a 3.5-inch

drive device in the drive case.

NOTE: A special adapter kit is required

in order to install a 2.5-inch drive.

1. Remove the drive case

cover by sliding it

toward the back of

the unit.

2. If you plan to install a drive that features removable media, carefully

punch out the center part of the front panel.

IMPORTANT: If you are installing a new hard drive in the case, you

may need to congure the drive before you

install it. Refer to the drive manufacturer’s

documentation and congure the

drive as Master, Cable Select

or Slave depending on the

conguration of your

computer. After you

complete this

installation, you

may also need to

re-congure the

computer’s BIOS

setup to make the

drive functional in the system.

SATA Connector Power Connector

Diagrams are representational

of the entire line of MANHATTAN

docking kits and may not depict

specic cables/connectors.

3. The drive case’s SATA cable supports 3.5-inch drives. Attach the

power and SATA cables from the drive case to the drive. The power

connector is “D”-shaped to help orient the connector correctly.

NOTE: In order to install a 2.5-inch drive, you need a 44-pin-to-40-pin

connector adapter.

4. Carefully position the drive inside the drive case

5. Secure the drive in place using the supplied mounting screws. Use

the mounting holes on the sides or bottom, depending on the design

of the drive.

6. Slide the drive case cover back on.

The hardware installation is now

complete; the drive case is

ready to use.

Hot-Swapping

The power to your computer can be on both when the drive is inserted or

removed. Use the key to turn the drive on after inserting it and off before

removing it.

To insert the drive case:

1. Insert the drive case (with drive installed) into the installed docking case,

pushing rmly until the drive is seated.

2. Insert the provided key and lock the case in place by pushing the key

in and turning it clockwise. The LED beneath the switch lights after a

slight delay, indicating the device is ready to use.

To remove the drive case:

1. Unlock the drive case (if locked) by turning the key counterclockwise.

CAUTION: Do not turn the key to unlock the drive case while the drive

is in use, as loss of data may occur.

2. Gently pull on the handle to slide the drive case out.

SPECIFICATIONS

Standard and Certications

• SATA 300/150, CE, TÜV, RU

General

• SATA-to-SATA interface

• Supports data transfer rates of up to

3 Gbps

• Electronic locking mechanism &

integrated power switch (2 keys)

• Single rear-mount cooling fan,

4 cm (1.5 in.)

• LED indicators: Power & Activity

Connections

• Drive-to-tray: SATA power,

SATA L-type data

• Tray-to-chassis: Centronic-type

connector (gold-plated)

• Chassis: SATA L-type data, 4-pin

Molex 12 V power, 2-pin fan power

Physical

• Material:

- Model 451154: plastic (94V-0 ABS)

- Model 451147: aluminum & plastic

(94V-0 ABS)

• Chassis: 219 x 146 x 41 mm

(8.625 x 5.75 x 1.625 in.)

• Tray: 195 x 117 x 36 mm

(8 x 4.625 x 1.5 in.)

• Weight:

- Model 451154: 385.5 g (13.6 oz.)

- Model 451147: 649.2 g (22.9 oz.)

Environmental

• Operating temp.: 23 – 122˚F

(-5 – 50˚C)

• Storage temperature: -4 – 149˚F

(-20 – 65˚C)

• Operational humidity: 10 – 80%

• Storage humidity: 10 – 90%

All products mentioned are trademarks or registered trademarks of their respective owners.

www.manhattan-products.com

MANHATTAN®offers a complete line

of PC Components, Peripherals, Cables and Accessories.

Ask your local computer dealer for more information

or visit us online at

Ce manuel convient aux modèles suivants

Table des matières

Manuels disque dur populaires d'autres marques

Seagate

Seagate BarraCuda Pro ST8000DM005 Manuel utilisateur