2
INSTRUCTIONS MANUAL
Important information you need to know:
Read all of these instructions. Failure to follow all of
these instructions listed below may result in personal
injuries and damage to the equipment.
SAVE THIS MANUAL
ATTENTION: When you use electrical equipment,
always follow the safety measures to reduce re
hazard,electrical shock and personal injuries, including
but not limited to:
1. WORK AREA:
• Maintain a clean work area. Messy work spaces are a
huge cause of work related accidents.
• Do not use saws in dangerous areas. Do not use
electronic tools in humid areas, wet areas, exposed to
rain, in the presence of liquids or ammable gasses.
Maintain your work area well illuminated.
• Maintain kids away from the machine. All visitors
should maintain a safe distance to avoid injuries.
• Maintain kids away from the machine. Utilize locks
to lock the machine’s main power switch, activate
the emergency buttons and un-plug the machine to
prevent it from being turned on.
2. ELECTRONIC SAFTY
Make sure that your outlet is in accordance with the
machine. An increase or decrease of 10% in the voltage
may cause the machine to malfunction or even get
damaged. All of MAKSIWA’s tools are tested in our
factories. In case this machine does not work, check
your power supply.
CAUTION: WHEN DOING MANTNENCE ONLY SWAP
PARTS FOR IDENTICAL PARTS
• Fix or change damaged wires.
• The plug of the equipment needs to be compatible
with the outlet. Never modify the plug. Do not use
a plug adapter with this equipment. By note using
adapters and using only compatible sockets you
reduce the risk of electric based injuries.
• Avoid physical contact with any component
connected to your ground wires. There is an increase
in getting electrocuted if you are in direct contact
GENERAL SAFTY GUIDELINES
with such components.
3. PERSONAL SAFETY
• Be alert, look at what you are doing and use common
sense when using this tool. Do not use this tool if you
are tired, under the inuence of any drug, alcohol or
medicine. A moment of distraction when operating
this machine could cause severe injury.
• Always use safety glasses, mask agents the dust,
shoes that do not slip, gloves, and ear plugs to reduce
any risk.
• Use adequate equipment. Do not use large clothes,
gloves, chains, rings, bracelets or other accessories
that may get snagged on the moving parts. It is
recommended that you use shoes that do not slip.
Use hair protection so it can’t get snagged on the
equipment.
• Do not stretch yourself out to reach something.
Always maintain your balance to avoid falling on the
sawblade.
• Unplug the machine before doing any maintenance
on it including, but not limited to, removing the saw
blade.
•Reduce the risk of unintentionally turning the
machine on by always checking it the main power
switch is o before plugging the machine in.
• Use only recommended accessories. Consult the
instructions manual to validate it the accessories is
recommended. Use of inappropriate accessories may
increase the risk of accidents.
• Never step on the machine nor clime on top of
it. Sirius accidents may occur to either you or the
machine if you do.
4. HOW TO USE AND MAINTAIN THE EQUIPMENT
• Only make cuts with sharp blades. Dull blades do
not cut well and put too much strain on the motor.
• Do not force the equipment. If you are feeling a
resistance, remove your panel and look around to nd
the issue. Forcing your equipment will only increase
risk of injury and/or damaging the equipment.
• Use the appropriate equipment. Do not force the
machine to cut something it was not meant to.
ALWAYS USE THE APROPRIET SAFTY
EQUIPMENT WHEN OPERATEING THIS
EQUIPMENT.
