Makita LS711D Manuel

TECHNICAL INFORMATION

Models

Description

New Tool

CONCEPTION AND MAIN APPLICATIONS

LS711D

190mm (7-1/2") Cordless Slide Compound Saw

LS0711D is the 18V Cordless version of LS0711

(190mm Cordless slide compound saw) developed for works

at the site far from A/C supplies, taking after the benefits of LS0711.

Vertical vise 1

Lock-off button(spare) 2

Dust bag 1

Chip saw blade190 1

Holder metal fittings 2

Box wrench 10 1

Set square(triangle) 1

Holder assembly

Horizontal vise

Set plate

Holder fitting set (for long stock)

Chip saw blade(various types)

Battery 1822(Ni-Cd,18V,2.0Ah)

Battery 1833(Ni-MH,18V,2.0Ah)

Fast charger DC1801

50mm(2")X182mm(7-1/8")

50mm(2")X127mm(5")

35mm(1-3/8")X182mm(7-1/8")

35mm(1-3/8")X127mm(5")

550mm (21-5/8")

at 90°/45°

at 45°/45°

454mm (17-7/8")

Motor

Battery

No load speed

Blade diameter

Arbor diameter

Net weight

DC 18V magnet motor

Battery 1822(Ni-Cd,18V,2.0Ah)

2000rpm(electric brake)

180mm(7-1/8")-190mm(7-1/2")

15.88mm(5/8")

North America

Other Countries 20.0mm(13/16")

10.5Kg(23.1lbs)

Max. cutting capacities

at 90°/90°

at 45°/90°

Angle

turn base/blade Max. size of stock

454mm (17-7/8")

Specifications

Standard equipment

Optoinal accessories

Sales Points

18V cordless machine

Powerful enough to

cut interior stocks

Operative without hand pinched.

Position to which Blade descends can be

regulated on the way and it is convenient

for grooving works.

As the scale is put in front,

easier to see

Inclinable 0

~45 to left side

Bevel scale easy to see

Linear ball bearings are applied

for two ball each and sliding is

smooth.

Cushions are put on both ends

of sliding so that the noise may

be reduced when sliding part

and the body are hitting with

each other.

Sliding mechanism

Life-long DC motor with

replaceable carbon brushes

*Interchangeable with Model 5621D

With electric brake

Positive stop angles: Left/Right

0, 15,22.5, 30, 45

Positive clicking stop of Turn base

As scale color is different from the

background color and the scales are big,

it is very easy to see.

Angle scales easy to see

With larger contact face of base,

steady cutting available.

Base

Horizontal vice (optional)

can be attached.

Holder fitting attacheable

to left/right sides

Notch depth adjusting mechanism

Good design shape for gripping.

Gearing handle easy for carrying

Inclined lever easy to operate Angle cut

Left; up to 47

~Right; up to 57

(1)GREASE APPLICATION

Capacity

Working volume per full-chaged battery with tipped saw bladeof standard accessory

Stocks

Angle

Blade:right 38mm x 89mm

(2 x 4)

Crown moldings 6"

Number of stocks to cut

approx. 50pcs.

approx. 90pcs.

Repair

*"Number of stocks to cut" differs by conditions of battery and application.

Apply Makita grease on the following rotating/sliding surfaces before assembling.

Up/Down shaking fulcrum of Blade case: Blade case, Arm, Pipe16-90

Arm rotation part: Arm, Arm holder complete, ScrewM10

L/R rotating support and sliding parts of Turn base: Turnbase,

Boss in the center of base, Slide plate, Tip of Grip32

Rotating and Open/Close parts of Safety cover: Center plate,Spiral spring 26,Tip of Link plate

(2)ASSEMBLY/DISASSEMBLY OF BLADE CASE( Motor part in the body)

[Disassembly]

Remove Blade , Safety cover, and Dust nozzle before disassembling.

1) Lower fully Blade case (Motor part in the body), and push Stopper pin in.

2) Remove Hex. socket head bolt M6 fixing Link plate , and loosen Hex. socket head bolt M6x10 fixing Pipe 16-90.

3) Gripping Blade case (Motor part in the body) with hand, pull Stopper pin and raise the body slowly. Where Torsion

spring 28 does not work, pull Pipe 16-90 and take off Blade case from Arm.

[Assembly]

Reverse procedure of disassembly.

Stopper pin Hex. socket head screw M6x10 Hex.socket head bolt M6

Blade case

Pipe 16-90

Take off

Link plate

Turn base:0°

Turn base:35.3°to left

Blade:30°

(3)ASSEMBLY OF SAFETY COVER

1) Insert Spiral spring 26 into the oval hole in Safety cover , making spring's tip meet the hole.

2) Making Center washer meet four bosses in Safety cover , and attach it. (See Fig.1)

3) By putting the tip of Spiral spring 26 into Center cover hole, attach Center cover as shown in Fig. 2.

4) Attach Center plate, making it meet four bosses in Safety cover, and tighten it with Pan head screw M5.

Oval hole in Safety cover Spiral spring 26 Flat washer 5

Pan head screw M5

Spiral spring 26 Center cover hole

Center washer

Center plate

Center cover

Safety cover

Fig. 1 Fig. 2

(4)ASSEMBLY OF SQUARE ROD COMPLETE AND RING 26

1) Passing Ring 26 through Slide pipe 25-235 as in the figure, attach Arm-holder complete to Turn base complete.

2) Slide Arm-holder complete until the groove on the top ofSlide pipe 25-235 comes to the center of Turn base,

and then attach Square rod complete.

3) Attach Thumb nut 6x33 and H.socket bolt to meet the holeof Turn base and that of Ring26.

(5)ASSEMBLY/DISASSEMBLY OF TURN BASE AND BASE

1) When detaching/ attaching Turn base from/to Base, push Lock lever first.

2) Adjust the torque of Hex. lock nut M8 in the center of Turn base so that Turn base may turn smoothly without trembling.

Thumb nut 6x33

Hex. lock nut M8 Turn base

Base

Lock lever

Arm-holder complete

Ring 26

Turn base complete

Square rod complete

Rubber pin

Slide pipe 25-235

H.socket bolt

(6)ASSEMBLY/DISASSEMBLY OF POSITIVE LOCK UNIT ON TURN BASE

[Disassembly]

1) Remove Tapping screw bind CT4x12, and take off Lock plate.

2) Remove Lock lever , and pull Pin 3 out.

3) Remove Lock pin from Turn base.( Compression spring 6 also comes off simultaneously)

[Assembly]

Reverse procedure of disassembly order.

(7)ASSEMBLY OF ARM

1) Adjust torque of Hex. lock nut M10 so that Arm may slidesmoothly without trembling.

2) Attach Lever 100 that fixes Arm so that it is placed in the position as in the figure when Arm is fixed.

(8)ADJUSTMENT OF THE STRENGTH OF TORSION SPRING 28

Adjust the strength of Torsion spring 28 by tightening/loosening Hex. socket head bolt M6x10

so that the cutting head may return to the top dead center smoothly from any position.

Turn base

Lock plate

Tapping screw bind CT4x12

Lock pin

Pin 3

Lever 100

Arm

Hex. socket head bolt M6x10 Torsion spring 28

Hex. lock nut M10

Compression spring 6

Lock lever

approx.45°

Switch

White Red

Insulated

connector

Black Black

Black

Terminal(+)

Terminal(-)

Brush holer

Battery holder

Circuit diagram

Autres manuels pour LS711D

Table des matières

Autres manuels Makita Scie

Makita

Makita EA3500S Guide de l'utilisateur

Makita

Makita N5900B Manuel utilisateur

Makita

Makita SH02 Manuel utilisateur

Makita

Makita BLS820 Manuel utilisateur

Makita

Makita LS0814 Manuel utilisateur

Makita

Makita MLT100N Manuel utilisateur

Makita

Makita 4390D Manuel utilisateur

Makita

Makita DPB180 Manuel utilisateur

Makita

Makita HS012G Manuel utilisateur

Makita

Makita JR100D Manuel utilisateur

Makita

Makita 5704R Manuel utilisateur

Makita

Makita 5704R Manuel utilisateur

Makita

Makita MAKSTAR BJR182RFE Manuel

Makita

Makita JR3051T Manuel utilisateur

Makita

Makita LS1214L Guide de démarrage rapide

Makita

Makita 2704N Manuel utilisateur

Makita

Makita DLS600 Manuel utilisateur

Makita

Makita JR3050T Manuel utilisateur

Makita

Makita BJR141 Manuel

Makita

Makita LS0714 Manuel utilisateur

Makita

Makita HS7601 Manuel utilisateur

Makita

Makita JR1000FT Manuel utilisateur

Makita

Makita JR002GZ Manuel utilisateur

Makita

Makita LS003G Manuel utilisateur

Manuels Scie populaires d'autres marques

RIDGID

RIDGID BS1400 Manuel utilisateur

ATIKA

ATIKA BWS 400-2 Manuel utilisateur

RGC

RGC FS20 Manuel utilisateur

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuel utilisateur

IMET Spa

IMET Spa SIRIO 370 AF-E Manuel utilisateur

Optimum

Optimum OPTisaw CS 275 Manuel utilisateur

Stihl

Stihl MS 462 C-M Manuel utilisateur

AEG

AEG TS 250 K Manuel utilisateur

Meec tools

Meec tools 004665 Manuel utilisateur

Ryobi

Ryobi RCS1400 Manuel utilisateur

DeWalt

DeWalt DCS391 Manuel utilisateur

Sealey

Sealey SA72 Manuel utilisateur

skilsaw

skilsaw SPT88 Instructions de montage

Urrea

Urrea SI810 Dimensions et guide d'installation

EINHELL

EINHELL BKG 210/1 Manuel utilisateur

Altrad

Altrad BELLE RANGER 450 Manuel utilisateur

Porter-Cable

Porter-Cable 725 Manuel utilisateur

Rockwell

Rockwell RK7241S Manuel utilisateur