MAKFRY MDFE-300S Manuel utilisateur
USER MANUAL
WWW.MAKFRY.COM
MDFE-300S / MDFE-300D
OPEN FRYER
CONTENTS
1- GENERAL INFORMATION
2- PRODUCT INTRODUCTION
3- TECHNICAL SPECIFICATIONS
4- TRANSPORTATION AND STORAGE CONDITIONS
5- UNPACKING THE PACKAGE
6- PRE-INSTALLATION INFORMATION
7- INSTALLATION AND USAGE
7.1- ELECTRICAL CONNECTION OF MDFE 300S DEVICE
7.2- ELECTRICAL CONNECTION OF MDFE 300D DEVICE
7.3- DEVICE ACCESSORIES
8- DIGITAL CONTROL PANEL INTRODUCTION AND USAGE
9- INITIAL START-UP AND PUMP SYSTEM CLEANING
10-AUTOMATIC FILTRATION
11-CHANGING THE PAPER FILTER
12-ELECTRICAL DIAGRAM
13-WARRANTY CERTIFICATE AND TERMS
DEAR USER,
AS MAKFRY FAMILY, WE THANK YOU FOR CHOOSING OUR DEVICE AND FOR YOUR TRUST IN OUR
COMPANY. WE IMPORTANTLY REMEMBER YOU TO READ THE INSTRUCTIONS AND INFORMATION IN
THE USER MANUAL CAREFULLY AND HAVE YOUR USERS READ IT IN ORDER TO GET THE PRODUCT
SUITABLE FOR YOUR EXPECTATIONS AND TO USE IT FOR A LONG-TERM.
THE INFORMATION REGARDING THE INSTALLATION, USAGE AND MAINTENANCE OF THE PRODUCT
YOU HAVE PURCHASED IS INCLUDED IN THE USER'S MANUAL.
PLEASE READ THE USER MANUAL CAREFULLY BEFORE INSTALLING YOUR DEVICE. THE CONNECTION
NETWORK MUST BE PREPARED BY AUTHORIZED PERSONNEL IN ACCORDANCE WITH THE LEGAL
REGULATIONS. IF THE MAINS VOLTAGE TO THE ELECTRICAL CONNECTION OF YOUR DEVICE IS NOT IN
SUITABLE CONDITIONS, THE VOLTAGE OVER THE DEVICE'S CAPACITY WILL CAUSE FAILURE AND
YOUR DEVICE WILL BE OUT OF THE SCOPE OF WARRANTY.
1- GENERAL INFORMATION
THIS USER'S MANUAL CONTAINS INFORMATION ABOUT MAKFRY MDFE-300S / MDFE-300D
INSTRUCTIONS FOR USE, REQUIREMENTS AND COVERAGE OF WARRANTY.
CAREFULLY READ ALL INSTRUCTIONS AND WARNINGS IN THE USER'S MANUAL. THIS USER'S
MANUAL CONTAINS IMPORTANT INFORMATION ABOUT THE SAFE INSTALLATION, USE AND
MAINTENANCE OF YOUR PRODUCT.
THE MANUFACTURER CANNOT BE RESPONSIBLE FOR DAMAGES TO HUMAN, ENVIRONMENT OR
OTHER MATERIALS ARISING FROM PRINTING OR TRANSLATION OF THE USER'S MANUAL.
INCIDENTAL DAMAGE TO YOUR PRODUCT, NEGLIGENCE, DAMAGE DUE TO FAILURE TO FOLLOW
INSTRUCTIONS AND REGULATIONS OR WRONG CONNECTIONS AND UNAUTHORIZED INTERFERENCE
TO THE PRODUCT SHALL EXCEED THE PRODUCT WARRANTY PROCESS.
KEEP THIS USER MANUAL IN AN EASY ACCESS PLACE FOR USE IF NEEDED.
2- PRODUCT INTRODUCTION
MAKFRY MDFE-300S / MDFE-300D OPEN FRYERS ARE DESIGNED TO BE USED IN INDUSTRIAL
KITCHENS AND IT IS RECOMMENDED FOR USE BY PROFESSIONAL USERS.
3- TECHNICAL SPECIFICATIONS
PRODUCT:
MDFE 300S
DIMENSIONS
WIDTH:450 MM - DEPTH:750 MM –HEIGHT: 960 MM
ENERGY
380-400 V 13,5 kW 50-60HZ
WEIGHT
101 KG (GROSS)
TANK CAPACITY
30 LITER
OIL CAPACITY
18 LITER
COOKING CAPACITY
1 KG IN 2,5 MINUTES / 24 KG IN HOUR
PRODUCT:
MDFE 300D
DIMENSIONS
WIDTH :900 MM - DEPTH :750 MM –HEIGHT :960 MM
ENERGY
380-400 V 13,5X2 kW 50-60HZ
WEIGHT
153 KG (GROSS)
TANK CAPACITY
30X2 LITER
OIL CAPACITY
18X2 LITER
COOKING CAPACITY
1X2 KG IN 2,5 MINUTES / 24X2 KG IN HOUR
4- TRANSPORTATION AND STORAGE CONDITIONS
THE PRODUCT IS SPECIALLY PACKED AND SHIPPED IN A FORM. CARRY THE PRODUCT WITH THE
FORKLIFT FEET INSTALLED UNDER THE PALLET. IF THE TRANSPORT DISTANCE IS FAR, IT MUST BE
MOVED SLOWLY AND SUPPORTED BY AN ADDITIONAL PERSON TO AVOID LOSS OF BALANCE. DO
NOT KNOW OR DROP THE PRODUCT WHEN CARRYING IT. IF THE PRODUCT IS TO BE STORED
WITHOUT USING, IT SHOULD BE STORED WITHOUT OPENING ITS PACKAGING AND CASE. IF THE
PRODUCT IS TO BE USED AND STORED AGAIN, IT MUST BE PROTECTED BY CLEANING AND
PACKAGING
5- UNPACKING THE PACKAGE
CHECK THAT THE PRODUCT IS NOT DAMAGED DURING SHIPPING. CHECK THAT THE PARTS OF THE
PRODUCT ARRIVES COMPLETELY.
PARTS IN CONTACT WITH FOOD ARE MADE OF STAINLESS STEEL. PLASTIC PARTS IN CONTACT WITH
FOOD ARE MANUFACTURED ACCORDING TO FOOD REGULATIONS. ALL PLASTIC PARTS ARE MARKED
WITH THE MATERIAL SYMBOL.
DISPOSE THE PACKAGING MATERIALS OF THE PRODUCT AFTER INSTALLATION ACCORDING TO THE
SAFETY AND ENVIRONMENTAL CONDITIONS AND ACCORDING TO THE REGULATIONS OF THE
COUNTRY YOU ARE IN. TAKE THE RECYCLABLE MATERIAL (FOIL, CARTON, STYROFOAM, ETC.) INTO
THE RELEVANT RECYCLING BOXES. WHEN DISPOSAL OF ANY ELECTRICAL EQUIPMENT, MAKE IT
UNUSABLE BY CUTTING THE CABLE.
6- PRE-INSTALLATION INFORMATION
INSTALLATION MUST BE DONE BY AN AUTHORIZED TECHNICIAN ACCORDING TO THE INSTRUCTIONS
AND REGULATIONS. OUR COMPANY CANNOT BE LIABLE FOR ANY DAMAGES DUE TO INCORRECT
INSTALLATION.
IF THE PRODUCT FAILS, TURN OFF THE PRODUCT. ONLY A SERVICE AUTHORIZED BY THE
MANUFACTURER MUST PROVIDE THE PRODUCT.
FAULTS MUST BE REPLACED WITH ORIGINAL SPARE PARTS. THE PARTS LIST IS ALSO STATED IN THE
BOOKLET.
THE FLOOR ON THE PRODUCT MUST BE FLAT. NECESSARY PRECAUTIONS MUST BE TAKEN AGAINST
THE RISKS OF THE PRODUCT TO TURNOVER.
THE PRODUCT MUST BE CONNECTED TO THE MAIN NETWORK BY AN AUTHORIZED ELECTRICAL
TECHNICIAN ONLY IN ACCORDANCE WITH THE LAW AND REGULATIONS. MAKE SURE THAT THE
POWER FROM THE MAIN NETWORK WILL MATCH THE POWER OF THE PRODUCT. MAKE THE
GROUND CONNECTION OF THE PRODUCT ACCORDING TO THE STANDARDS AND SAFETY RULES.
GROUNDING OF THE PRODUCT MUST BE CONNECTED TO THE EARTH LINE ON THE NEAREST PANEL
OF THE ELECTRICAL INSTALLATION. THE PRODUCT ELECTRICAL CONNECTION, MAIN FUSE AND
LEAKAGE FUSE MUST COMPLY WITH THE APPLICABLE REGULATIONS AND RULES.
7- INSTALLATION AND USAGE
7.1-ELECTRICAL CONNECTION OF MDFE 300S DEVICE
THE ELECTRICAL CONNECTION OF YOUR MACHINE SHOULD BE MADE BY AN AUTHORIZED
PERSONNEL. THE POWER VALUES AND CONNECTION DIAGRAM ON THE DEVICE SHOULD BE
CONSIDERED DURING CONNECTION. THE MACHINE CONSUMES
A TOTAL OF 13.5 KW OF ENERGY, WITH 3X4.5 KW. THE DEVICE
IS SHIPPED WITH THREE-PHASE CABLE FROM THE FACTORY.
ANY INCORRECT APPLICATION, SUCH AS TAKING NEUTRAL
FROM THE EARTH LINE, WILL CAUSE THE DEVICE TO BE
OUTSIDE OF THE WARRANTY COVERAGE AND MALFUNCTION.
THE CONNECTION DIAGRAM IS AS FOLLOWS:
WARNING: INCORRECT CONNECTION WILL RESULT IN DEVICE
FAILURE AND EXCLUSION FROM WARRANTY COVERAGE.
*IF USING A PLUG/OUTLET, MAKE SURE IT IS AT LEAST 32 AMPS.
*ALWAYS BRIDGE THE PHASE WITH A PORCELAIN TERMINAL.
*IF YOU ARE CONFUSED, ALWAYS SEEK TECHNICAL SUPPORT
BEFORE MAKING CONNECTIONS.
7.2-ELECTRICAL CONNECTION OF MDFE 300D DEVICE
THE ELECTRICAL CONNECTION OF YOUR MACHINE SHOULD BE MADE BY AN AUTHORIZED
PERSONNEL. THE POWER VALUES AND CONNECTION DIAGRAM ON THE DEVICE SHOULD BE
CONSIDERED DURING CONNECTION. THE MACHINE CONSUMES
A TOTAL OF 13.5 KW OF ENERGY, WITH 3X4.5 KW. THE DEVICE
IS SHIPPED WITH THREE-PHASE CABLE FROM THE FACTORY.
ANY INCORRECT APPLICATION, SUCH AS TAKING NEUTRAL
FROM THE EARTH LINE, WILL CAUSE THE DEVICE TO BE
OUTSIDE OF THE WARRANTY COVERAGE AND MALFUNCTION.
THE CONNECTION DIAGRAM IS AS FOLLOWS:
WARNING: INCORRECT CONNECTION WILL RESULT IN DEVICE
FAILURE AND EXCLUSION FROM WARRANTY COVERAGE.
*IF USING A PLUG/OUTLET, MAKE SURE IT IS AT LEAST 32 AMPS.
*ALWAYS BRIDGE THE PHASE WITH A PORCELAIN TERMINAL.
*IF YOU ARE CONFUSED, ALWAYS SEEK TECHNICAL SUPPORT
BEFORE MAKING CONNECTIONS.
7.3-DEVICE ACCESSORIES
THE ACCESSORY LIST FOR THE DEVICE IS AS FOLLOWS
FACTORY SETTINGS OF THE PROGRAMS
FACTORY SETTINGS ON THE DIGITAL PANEL
STANDBY
NO TIME –160 °C
PROGRAM 1
5 MIN. –180 °C
PROGRAM 2
6 MIN.–180 °C
PROGRAM 3
7 MIN.–180 °C
PROGRAM 4
8 MIN. –180 °C
PROGRAM 5
9 MIN. –180 °C
PROGRAM 6
9 MIN. –180 °C
DEVICE ACCESSORY LIST
MDFE 300 S
MDFE 300 D
BASKET
2 PIECES
4 PIECES
PAPER FILTER
25+1 PIECES (1 FILTER
ASSEMBLED IN EACH)
25+1 PIECES (1 FILTER ASSEMBLED
IN EACH)
PAPER FILTER HOOK
2 PIECES
2 PIECES
CLEANING BRUSH - CURVED
1 PIECE
1 PIECE
CLEANING BRUSH - STRAIGHT
1 PIECE
1 PIECE
USER MANUAL & WARRANTY CARD
1 PIECE
1 PIECE
FILTER REPLACEMENT PIPE REMOVAL
KEY
1 PIECE
1 PIECE
WARNING: BE SURE TO REMOVE THE ACCESSORIES FROM INSIDE THE MACHINE BEFORE THE FIRST
COOKING.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels MAKFRY Friteuse
