Makeblock MSpider Manuel utilisateur

mSpder User Guide

Contents

I、Equipment necessary before .................................................................................i

II、Product description.................................................................................................... 1

1. mDrawBot .................................................................................................................. 1

III、Mechanical assembly (see document mDrawBot instruction V1.1 20150704)......... 1

IV、Recommended wiring diagram (Bluetooth communication for Bluetooth version) . 2

V、Definition of mSpider electronic wiring ..................................................................... 2

VI、mDraw software......................................................................................................... 3

1. Description of mDraw functions ................................................................................ 3

2. Software installation, ................................................................................................. 3

3. Button function of main software interface .............................................................. 3

4. Use of mSpider ........................................................................................................... 7

VII、Example of completely using mDraw software.................................................... 10

VIII、See “How to use inkscape+corelDRAW software” for generator of SVG graph. . 12

IX、Please refer to mDrawBot FAQs - V1.3(English) for FAQs. ............................ 12

X、Contact us: ............................................................................................................... 12

mSpder User Guide

I、Equipment necessary before

1. Hardware:

①.mDrawBot kit

②. Assemble Instruction V1.1 20150704

2. Software:

a. Necessary software

mDraw

Inksape

B. Software possibly required

Arduino IDE

Makeblock main board drive

(Note: If Mac OS system is used, click hyperlink to

load and install the drive)

3. Download software and detained information package

http://learn.makeblock.cc/mdrawbot/

Hint 1

4 assembly modes are used for mDrawBot, the assembly of all movable parts has assembly

accuracy requirement, install and finely adjust the robot strictly as required by the assembly

description, especially adjustment of shaft and rotating part, steering engine and rudder arm, machine

levelness.

Hint 2

The material object may differ from the picture provided in the specification, so the specification

is only for reference, and specification and software may be changed without prior notice. Please

assess the website for detailed change: http://learn.makeblock.cc/mdrawbot/

mSpder User Guide

1/ 12

II、Product description

1. mDrawBot

mDrawBot is advanced drawing kit designed based on Makeblock open platform and may be

constructed to four types: mScara, mSpider, mEggBot and mCar. In addition to specially designed

hardware structure, we specially equip mDrawBot software –mDraw.

A. mSpider

A wall or white board drawing robot dragged by two high strength Dacron ropes. As its

structure likes spider, so it is called mSpider. The Dacron ropes are driven by two stepping

motors to add gravity for achieving drawing in vertical surface.

III、Mechanical assembly (see document mDrawBot

instruction V1.1 20150704)

mSpder User Guide

2/ 12

IV、Recommended wiring diagram (Bluetooth

communication for Bluetooth version)

(Note: When Bluetooth is used as serial port, connect Bluetooth with port 5 OF Makeblock

Orion board.

V、Definition of mSpider electronic wiring

6P6C RJ25 cable-35cm

Connect to Port 7

6P6C RJ25 cable-20cm

Connect to Port 1

6P6C RJ25 cable-20cm

Connect to Port 2

Stepper motor A

Stepper motor B

6P6C RJ25 cable-20cm

Connect to Port 5

9g Servo

Extension Cord

mSpder User Guide

3/ 12

VI、mDraw software

1. Description of mDraw functions

mDraw is open source cross-platform software produced by Makeblock and support

Windows system, Mac system and Linux system, and perfectly supports four types of mDrawBot

such as mSpider, mScara, mEggBot and mCar, and supports the steering engine mode and laser

mode of Makeblock XY drawing robot kit V2.0.

Support SVG format, Change BMP to SVG

2. Software installation,

Unzip the downloaded file pack, find and double click the file as show in the figure.

3. Button function of main software interface

mSpder User Guide

4/ 12

（1）Main interface

（2）Button function

: Open the file

: Delete SVG file

: Begin/ suspend

: Stop

: Up and down mirror image

: Left and right mirror image

: Clockwise rotate at 90°

: Anticlockwise rotate at 90°

: Help link

Back to

origin point

Drop-down box of

robot configuration

Update firm

ware for a

new

Wire map

Servo mode

mSpder User Guide

5/ 12

: Machine returning to initial position

: Robot mode switching button: five modes such as mScara, mSpider, mEggBot, mCar,

: Setting button, mainly used for setting arm length parameter, operation speed, and front

and reverse rotation of motor

: Upgrade firmware button

: Electronic wiring diagram of robot

: Pen lift parameter setting

: Pen fall parameter setting

: Store pen lift and fall parameters on the main board chip

: Select serial port

: Serial port connecting button

: Synchronous position

: Change drawing scale

（3）Function description of plot area

a) After double clicking the main interface, the robot will move with the graph.

Initial Position

mSpder User Guide

6/ 12

b). Drag the led SVG format to change the size and location of the SVG drawing, or change

the drawing size by directly entering the digit on the low right of the graph.

c). While leading BMP file, the software automatically pop up SVG file change dialog box,

and according to adjustment parameter, change the file to SVG format.

（4）Function description of setting area

a). Single click button to open the setting interface as shown in the following figure.

b). AB is the horizontal length of holes, and AB-0 is the distance between the perpendicular

bisector of AB and the screws on the top of triangular support. Fill after accurately measuring by

paper rule or steel rule. See the figure for meaning.

c). A button is arranged on the back to change the rotation direction of the stepping motor if

mSpder User Guide

7/ 12

the rotation direction is incorrect.

4. Use of mSpider

（1）mSpider

a）.Inspect and confirm that the wire connection is correct (Note: you may click to

inspect. ). Connect USB with the computer ( Note: if Bluetooth is used, install the

Bluetooth drive on the computer)

b）.Select and connect correct COM port and click burning hardware (note: While the robot is

switched to other drawing type, you are required to click Update Firmware to upgrade the

firmware to ensure The robot can operate in new drawing type.

c）.Click icon to access the setting interface. When it is used first time or the AB of

mSpider and AB-O are changed, measure corresponding size and fill it. Before use, measure

corresponding length. Click Ok to confirm.

Meaning of initial position view and software parameter

Table des matières

Autres manuels Makeblock Robotique

Makeblock

Makeblock Ultimate 2.0 Manuel utilisateur

Makeblock

Makeblock mBot Servo Pack Manuel utilisateur

Makeblock

Makeblock mScara-Laser Version Manuel utilisateur

Makeblock

Makeblock Codeybot Manuel utilisateur

Makeblock

Makeblock mBot2 Manuel utilisateur

Makeblock

Makeblock Explorer Manuel utilisateur

Makeblock

Makeblock mBot2 Manuel utilisateur

Makeblock

Makeblock m Bot mega Manuel utilisateur

Makeblock

Makeblock mEggBot Manuel utilisateur

Makeblock

Makeblock Starter Robot Kit Manuel utilisateur

Makeblock

Makeblock mDrawBot Kit Dimensions

Makeblock

Makeblock mScara Manuel utilisateur

Makeblock

Makeblock Codey Rocky Manuel utilisateur

Makeblock

Makeblock mBot Manuel utilisateur

Makeblock

Makeblock mBot Manuel utilisateur

Makeblock

Makeblock Smart Target Mode d’emploi

Manuels Robotique populaires d'autres marques

STEMCenter USA

STEMCenter USA Pi-Bot v2.00 Manuel utilisateur

SunFounder

SunFounder PiDog Manuel utilisateur

Universal Robots

Universal Robots UR5 Manuel utilisateur

Universal Robots

Universal Robots E Series Manuel utilisateur

YASKAWA

YASKAWA MOTOMAN-MPL80 II Manuel utilisateur

EFORT

EFORT ECR5 Manuel d'instructions

Epson

Epson C8 Series Manuel utilisateur

WowWee

WowWee ROBOQUAD Manuel utilisateur

Milvus Robotics

Milvus Robotics SEIT 100 Manuel utilisateur

RoboMaster

RoboMaster AI Robot 2020 Standard Version Manuel utilisateur

fischertechnik

fischertechnik Mini Bots Manuel utilisateur

YASKAWA

YASKAWA MA2010 Manuel

Abicor Binzel

Abicor Binzel iCAT mini Manuel utilisateur

ABB

ABB OmniCore E10 Manuel utilisateur

YASKAWA

YASKAWA Motoman DX200 Manuel utilisateur

pitsco

pitsco Tetrix Max Manuel utilisateur

ECOVACS

ECOVACS DEEBOT R95 Manuel utilisateur

Feng Yuan

Feng Yuan Interstellar Warrior Manuel utilisateur

Makeblock mSpider Manuel utilisateur

Manuels Robotique populaires d'autres marques