Majestic SATPOS20D Mode d’emploi
Installation & User Manual
SATPOS20D
Mobile Dome Positioner Antenna
Built in HD Digital Tuner
This manual contains important product information
on the use and maintenance of your SATPOS20D
Dome Positioner satellite system. Please refer this
manual for installation, operation, maintenance and
contact information. Prior to contacting the manu-
facturer or dealer, have this manual and serial num-
ber available for reference.
ELECTRICAL HAZARD WARNING
THE COAXIAL CABLE THAT CONNECTS
THE OUTDOOR ANTENNA CARRIES
ELECTRICAL CURRENT.
EXERCISE EXTREME CAUTION WHEN
HANDLING THIS CABLE. DO NOT CUT,
BREAK OR SPLICE THIS LINE. DO NOT
INSERT OR CONNECT ANY DEVICES
SUCH AS SPLITTERS OR ANY OTHER
DEVICE FOR ANY REASON. THIS LINE IS
NOT COMPATIBLE WITH ANY OTHER
EQUIPMENT. DAMAGE WILL OCCUR TO
ANY DEVICE OTHER THAN THE SAT-
POS20D OUTDOOR ANTENNA IF
CONNECTED TO THE ANTENNA PORT.
2
SATPOS20D
3
Table of Contents
1 Introduction
1.1 SATPOS20D System Overview
1.2 System Compatibility
1.3 Direct Broadcast Satellite Overview
1.4 Line of Sight (LOS) Interruption
1.5 System Components
2 Installation
2.1 Unpacking the SATPOS20D
2.2 Antenna Installation
3 Operation
3.1 Operating the SATPOS20D
3.2 The Satellite Acquisition with the SATPOS20D
system
4 Troubleshooting
4.1 Causes and Remedies for Operational Issues
5 Maintenance
Majestic Global NZ Ltd.
A complete satellite TV system, illustrated in Figure 1-1, includes the
SATPOS20 antenna connected to a control box (IDU), a satellite TV
receiver, and a television set.
1.1 SATPOS-20D System Overview
Figure 1-1
4
SATPOS20D
1 Introduction
The SATPOS20D satellite system is the innovative and a technologically
advanced satellite Dome Positioner system. The SATPOS20D has a
unique combination of state-of-the art components with the most
sophisticated satellite acquisition and tracking programs to provide the
following features:
■Fast satellite acquisition
■Compatible with any Satellite Receiver
■Compatible with all Direct Broadcast Satellites (DBS)
■Built-in Digital Broadcast Receiver (DVB)
Digital Receiver for HD signals
■
Coax Antenna Cable
(White)
Supplied 10 metres
Coax Cable
(White)
Supplied 1 metre
1.2 System Compatibility
1.3 Direct Broadcast Satellite Overview
Direct Broadcast Service (DBS) satellites broadcast audio, video and
data information from satellites located 22,000 miles in space. A
receiving station, such as the SATPOS20D, should include a dish and
satellite receiver to receive the signals and process them for use by the
consumer audio and video equipment. The system requires a clear
view of the satellite in the sky to maximize the signal reception.
Figure 1-2
Majestic Global NZ Ltd.
The SATPOS20D satellite antenna is fully compatible with Digital Video
Broadcasting (DVB) satellites, as well as OPTUS D1 satellite. At
present, there is one Direct Broadcast Satellite position over New
Zealand.
5
1.4 Line of Sight (LOS) Interruption
The SATPOS20D needs a clear line of sight (LOS), view to the satellite
for uninterrupted reception. Objects such as tall buildings, bridges,
tunnels and trees that block this view will cause a loss of signal. The
signal will be quickly restored once the antenna has a clear line of sight
again.
Heavy rain, cloud, snow or ice may also interfere with the signal
reception quality. If the satellite signal is lost due to blockage or severe
weather condition, services from the receiver will be lost (picture will
freeze frame and may disappear). When the satellite signal strength is
again high enough, then the receiver will resume providing desired
programming services.
1.5 System Components
The standard SATPOS20D antenna system consists of the Outdoor Unit
(ODU, dome antenna), the Indoor Unit (IDU), including Power Supply.
SATPOS20D Outdoor Unit (ODU):
The Outdoor Unit houses the electronics, dish, LNB within a radome.
SATPOS20D
Figure 1-3
6
SATPOS20D Outdoor Unit (Inside):
Majestic Global NZ Ltd.
SATPOS20D Indoor Unit (IDU):
The 2011 Digital IDU unit supplies power and controls the SATPOS20D
Antenna. The Digital IDU is designed to provide improved performance
and decode HD and Standard digital signal.
Figure 1-4
Figure 1-5
7
This section offers a general explanation of how properly to install the
SATPOS20D antenna. Installation of the SATPOS20D must be accomplished
by or under the supervision of an authorized dealer for the Limited Warranty
to be valid and in force. The steps in the installation and setup process are as
follows:
1. Preparing for the installation
2. Select location
■Mount the antenna (ODU) on top of the vehicle
3. Equipment and cable installation
■Install the Indoor Unit (IDU), Power Supply near the Satellite
Receiver and TV
■Connect the cables
4. Initial power-up and system checkout
■Select the satellite
2.1 Unpacking the SATPOS20D
The following items are included in the packaging of the SATPOS20D:
Be sure to verify the complete shipment of your system before
beginning the installation.
2 Installation
SATPOS20D
8
Item Description Quantity
1Outdoor Antenna Assembly (ODU) 1 each
2Digital Indoor Unit (IDU) 1 each
3Power Cable 1 each
4Coax Cable (10m) 1 each
5Coax Cable (1m) 1 each
6Installation & User Manual 1 set
2.1.1 Preparing the SATPOS20D Antenna for Installation
Upon opening the shipping container remove the items listed in the
table above
2.1.2 Installation Tools and Materials
The SATPOS20D system is designed for simple installation and setup.
However, the following list of equipment or items should be available
during installation of the SATPOS20D:
■Electric drill and drill bits (Define the size?) eg. 5mm & 2mm
■Philips and flat tip screwdrivers (Define the size?) eg. #2 & #0
■Socket wrench
■Silicon sealant
■Fastener suitable for specific application
2.2 Antenna Installation
2.2.1 Select Location
Perform a through site inspection on the roof for the antenna to be mounted.
1. The antenna must have a clear view of the sky and horizon at all the
direction to avoid blockage of the satellite signal.
2. The antenna should be on the centerline of the vehicle.
3. The antenna should be mounted on as level a surface as possible.
4. Initial power-up and system checkout
5. Using two people, place the antenna onto the roof. Do not try to install
the antenna by yourself.
■Now that the location has been determined, place the antenna in
its final desired location.
■Make sure that it is the centerline of the vehicle
2.2.2 Equipment and cable installation
This offers a general explanation of how to install the Indoor Unit and
satellite receiver properly to the inside of vehicle connecting with coax
cable.
1. The RF cable is routed from the antenna to the IDU inside the
vehicle.
2. Once decide where to place the IDU and satellite receiver, and
make sure that both units are placed in a dry and protected area.
3. The IDU and satellite receiver should be placed away from any
heat source and in an area with proper ventilation.
SATPOS20D
9
4. Ensure that there are at least 3cm of space around both units
for ventilation and connection of cables.
Do not stack the units on top of each other.
5. The following describes the basic wiring configurations for the
SATPOS20D antenna system.
■Connect the RF cable to the SATPOS20D port on the back of
the IDU
■Connect one end of the supplied coax cable to the receiver
2.2.3 Initial power-up and system checkout
Once all of the system cables have been connected, and when the
Power Supply is connected to the IDU then the antenna will have power
applied and it should be ready to checkout the system.
The light indicators on the IDU have three different modes of operation.
■When the POWER LED is lit, it indicates that the IDU is
turned on and tracking the satellite
■The LNB indicator lights up when your decoder is powering
the LNB
■When the antenna acquires the desired satellite, the LOCK
LED light is turned on
Figure 2-1
Majestic Global NZ Ltd.
10
Power can be turned off by pressing the POWER button as shown in Figure 2-2
Figure 2-2
Table des matières
Autres manuels Majestic Antenne
Manuels Antenne populaires d'autres marques
Alfa Network
Alfa Network APA-L01 Manuel utilisateur
Naval
Naval PR-422CA Manuel utilisateur
Feig Electronic
Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur
TERK Technologies
TERK Technologies TV44 Manuel utilisateur
Directive Systems & Engineering
Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur
HP
HP J8999A Manuel utilisateur
CommScope
CommScope CMAX-OMFX-43M-I53 Manuel utilisateur
Ramsey Electronics
Ramsey Electronics DAP25 Manuel utilisateur
COBHAM
COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien
Trango Systems
Trango Systems AD900-9 Manuel utilisateur
Steren
Steren ANT-100 Manuel utilisateur
Proxim
Proxim 5054-PA-23 Manuel utilisateur