Function Introduction:
1. Pair with 2 devices simultaneously
M100 can pair with 2 devices simultaneously.
1) Connect the first device with M100
2) Turn off the Bluetooth function of the first device
3) Connect the second device with M100
4) Turn on the Bluetooth function of the first device, click to reconnect “M100” on Bluetooth list.
Headset is now connected with both devices.
2. Redial function
Quick press 2x MFB to redial the last call.
3. Automatic re-connection function
The headset will re-connect paired devices automatically if it is disconnected. If it can not be
reconnected to any device for over 10 minutes, it will power off automatically. Please turn off
the headset and turn on it again to reconnect.
4. Three-party Call
1) Quick press MFB to answer the 2nd incoming call and hang up the 1st call..
2) Double press MFB to answer a 2nd incoming call and reserve the 1st call.
3) Press MFB for 2 seconds to keep the current call and reject new call.
4) During a three-party call, double press MFB to switch between the current call and the
reserved call.
5) During a three-party call, quick press MFB to end current call and meanwhile switch to
another call, press MFB again to end the 2nd call.
Cautions:
1. Ensure that the transducer are rested on the cheekbones in front of your ears, don't put the
transducers in your ears.
2. Do not use headphone with high volume for extra long time, which may cause hearing loss.
Always listen at a moderate level.
3. Do not throw, squeeze the headphone, or immerse the headphone in water. Please keep the
headphone away from fire, water and high-voltage equipment.
4. Please store the headphone in a dry and ventilated place and charge it every two months if
unused for a long time.
5. Please use a clean cloth to clear the water stains or sweat after exercising, it will be helpful for
long-term use.
Product Warranty Card
Bone Conduction
Transducers
Warranty:
Failure of headphone buttons, speaker or microphone; charge unavailable.
