Magnum Ui5 Manuel utilisateur
USER GUIDE
PLEASE READ ME FIRST! English
Table of contents
1. Your E-Bike…………………………………………………………………..2—3
1.1 Introduction
1.2 General presentation of the vehicle
2. Function of Display…………………………………………………………4—8
2.1 Function summary
2.2 Full view area
2.3 Normal view area
2.4 Normal operation
3. Using the bike……………………………………………………………...9—12
3.1 Riding the bike
3.2 Quick-release devices
3.3 Adjusting the saddle height
3.4 Precautions required prior to each use
3.5 Lubrication
3.6 Routine maintenance.
4. The battery………………………………………………………..……....12—14
4.1 Installation and Removal
4.2 Charging
4.3 Battery autonomy and lifespan
4.4 Battery safety instructions
5. Safety maintenance and recommendations………………….……..14—16
5.1 Safety recommendation
5.2 Maintenance
6. Accessories………………………………………………………………….....16
7. Warranty ………………………………………………………………………...16
2
Your E-Bike
1.1 Introduction
We would like to thank you for your purchase of a new Magnum e-Bike. The e-bike is
equipped with pedals and an auxiliary electric motor. You will thoroughly enjoy riding
this new and electrical power- assisted bike with an optional throttle propulsion.
Riding an e-bike means that you’re helping preserve the environment, since any CO2
or other polluting gases will not be released. For your safety and for the safety of
others, we recommend that you obey all road regulations and wear a protective
helmet. For optimal, safe and enjoyable use of the e-bike, make sure you thoroughly
read this user guide before you first use it.
Have a pleasant ride!
1.2 General presentation of the vehicle
1.2.1 General information
Weight of bike: 52 Lbs
Maximum assistance speed: No speed limit
The dimensions of the bike (MM): L 1750 x W230 x H980 (95% package)
Maximum total weight: 120KG (includes the bike, battery and rider)
3
1.2.2 Parts specifications
Spare parts name Ui5
Motor Das-Kit, 36V 350W, Rear drive motor
Battery 36V13AH SAMSUNG CELLS, with USB port
Display Das-Kit, C4BT : LCD, 6 Levels, Error code
report
Front fork SUNTOUR, NEX
E-Brake Lever ARTEK
Disc Brake TEKTRO Disc Brake
Derailleur SHIMANO ,Altus, 7 Speed
Tires SCHWALBE, Big Ben 26*2.15
** Charging time: 5.5 hours 0-100% charge
** Autonomy: between 40 to 100 KM, depending on the assistance level and road
condition.
** 2 charge indicators: 1 located on the display; 1 located on the side of battery.
** Weight: 3 KG
4
2. Function Display
2 .1 FUNCTION SUMMARY
The indicated contents are as below.
5
2.2 FULL VIEW AREA
2.3 NORMAL VIEW AREA
The normal viewing area of the C4BT LCD is shown below. Press SET to switch the
displaying information. The sequence is: ODO →Riding Time→Riding
Distance→Max Speed.
2.4 NORMAL OPERATION
1、ON/OFF
Click ON/OFF and start the display. The display will provide power for the controller.
Click ON/OFF again can open the backlight. With display on, press ON/OFF for 3
seconds to turn off the power. With the display off, there is no battery consumption.
The leakage current is no more than 2 µA.
※The display will go to sleep when speed is 0 km/h for 5 minutes.
2、CURRENT DISPLAY
The current indicator below represents the working discharging current of the
controller, each segment represents a working current of 2A, six segments
means >=12A.
6
3 、SPEED DISPLAY
The current riding speed of the e-bike displays as below.
4、KM/H & MPH
Select KM/H or MPH for the speed and mileage. The display will show the
denomination in the selected units.
5、BACKLIGHT
With the power on, click the ON/OFF to turn on the backlight. Click it again to turn off
the backlight.
6、6 KM/H WORK
Hold UP for 2 seconds and enter into the mode of power assist walk. The e-bike is
traveling at 6Km/h.
7、ASSIST LEVEL SELECTION
Click UP or DOWN to change the stages and output power ratio, the output power
cycle from level 0 to level 6 for the default (the levels can be customized by user) ,
the default value is level 3.
8、SET OPEARATION
8.1 Reset ODO
Hold UP and DOWN for 12 seconds to clear the ODO.
ODO
8.2 Reset trip distance and max speed
Hold SET for 3 seconds, SET 1 hold DOWN for 2 seconds to clear trip distance, trip
time and max speed.
7
trip distance trip time max speed
8.3 Wheel diameter setting
Press SET for 3 seconds, SET 2 to enter into wheel diameter setting. Select the
accurate wheel diameter value to ensure the accuracy of display about speed and
mileage.
※
Click UP or DOWN to set the wheel diameter.
8.4 Throttle speed setting
Press SET for 15 seconds to enter into the throttle speed setting interface. Click UP
or DOWN to set the throttle speed limited or not, the limited throttle speed is 20MPH.
8.5 KM/H & MPH
Press SET for 3 seconds, SET 3 to switch from KM/H and MPH.
9、DISTANCE INDICATOR
With the display on, press SET to switch the display information. In turn shows ODO
and trip distance.
9.1 ODO
The ODO records the driving mileage from using.
9.2 Trip distance
8
Trip distance records the driving mileage, it is displayed as below.
10、TRIP TIME INDICATOR
The trip time records the riding time, displayed as below.
11、ERROR DISPLAY
Press SET and DOWN in the case of not working to see all the error codes. The
error codes are defined as follows:
[0]Fault-Free [1] Current Abnormality
[2] Throttle Abnormality [3]
Motor's Phrase-Lacking
[4] Hall Abnormality [5] Braking Abnormality
[6] Undervoltage [7] Motor Stalling
[8] Controller Receive Abnormality
[9] Display Receive Abnormality
12、BATTERY INDICATOR
When the battery capacity is full, the six battery segments are all light. When the
battery is low, the battery frame will flash. It indicates that the battery is severely low
and needs to be recharged immediately.
Low battery flash
9
3. Using the bike
3.1 Riding the bike
Before taking off, make sure that you activate the battery by pressing on the button
located on the side of battery.
The 4 LEDs located on the top of the battery indicate the charge level.
Turn on the display unit on the handlebar. Select your desired assistance level and
begin pedaling. You’ll find the motor start working as soon as you start pedaling.
When you use the brakes, the contactor located within these brakes will halt the
motor’s assistance immediately.
The left brake lever controls the front brake. The right brake lever controls the rear
brake.
You can also use the bike without electric assistance by turning off the battery
(switch off the battery by adjusting the assistance level on 0). The motor will then
feature zero resistance: you’ll be freewheeling. Select the appropriate gear by
activating the 7-speed gear lever.
3.2 Quick-release devices
Tighten the adjusting nut by hand and move the quick release lever to the closed
position. You should feel considerable resistance while closing the lever. If not, re-
open and re-tighten the nut, then move the lever to the closed position so it is in line
with the frame.
Autres manuels pour Ui5
1
Table des matières
Autres manuels Magnum Vélo
Magnum
Magnum Pathfinder 500 Manuel utilisateur
Magnum
Magnum Cosmopolitan Manuel utilisateur
Magnum
Magnum Low Rider Manuel utilisateur
Magnum
Magnum Pathfinder Manuel d'instructions
Magnum
Magnum Pathfinder 350 Manuel utilisateur
Magnum
Magnum Pathfinder T Manuel utilisateur
Magnum
Magnum METRO Manuel utilisateur
Magnum
Magnum Cosmo X Manuel utilisateur
Magnum
Magnum METRO Manuel utilisateur
Magnum
Magnum Ranger Manuel utilisateur
Magnum
Magnum Navigator Manuel utilisateur
Magnum
Magnum PEAK Manuel utilisateur
Magnum
Magnum Peak T5 Manuel utilisateur
Magnum
Magnum Peak T5 Manuel utilisateur
Magnum
Magnum Nomad Manuel utilisateur
Magnum
Magnum Scout Manuel utilisateur
Magnum
Magnum Classic Manuel utilisateur
Magnum
Magnum Payload Manuel utilisateur
Magnum
Magnum Ui5 Manuel utilisateur
