Operations
1. LI-500 is a high AC voltage device, for safety purpose, place the unit away
from reach of children and pets. Check for proper wiring before operating the unit.
After the unit is turned on, the red LED located on the front panel will be lit.
2. LI-500 is recommended to be connected with digital or video devices such as, CD
player, DVD player, D/A converter, DLP Projector, etc.
Please be careful not to exceed its maximum output power.
3. Because video and audio systems can easily interfere with each other as load-to-
load interferences if both systems shared the same power line without using
isolate system. To achieve a greater improvement for both video and audio
systems, we recommended using two isolation transformers, one for audio and
another for video system.
4. LI-500 will be completely functions only if the ground connection is properly
installed. If the grounding system is not installed LI-500 can filter out high
frequency noises only at a certain level.
5. LI-500 can be used with Line Conditioner or Line stabilizer for a greater noises
reduction system by connecting LI-500 AC input with the Line Stabilizer or Line
Conditioner AC output.
6. In the case of upgrading Magnet LC-2 Power Line Conditioner with LI-500
Isolation Transformer. This can be done by:
1. Remove the LC-2 Link Cable.
2. Connect LC-2 AC Output with LI-500 AC Input.
3. Connect LI-500 AC Output with LC-2 AC Input.
Caution: Please make sure that all AC Sockets have been tightly plugged in.
LI
500
3
