Magnadyne RV5070 Fiche technique
Operation
and Installation
Manual
®
RV5070 AM / FM Stereo
Multi-Media Receiver
MHz
Please take the time to read all of the information in this manual. Familiarity with operation and instal-
lation procedures will help you obtain the best possible performance from your new AM/FM Stereo
Multi-Media Receiver.
WARNING! To prevent fire or electrical shock hazard, do not expose this product to moisture, or remove
cover or bottom screws. No user-serviceable parts inside. Refer servicing to qualified person
nel.
Introduction
2
Index
Button Locations and Functions 3-4
Remote Control Button Locations and Functions 5
General Operation 6
Sound Controls 6-8
Speaker Selection 8
Setting the Clock 8-9
Sleep Timer Operation 9
Alarm Operation 10
Radio Operations 11-12
Disc Warnings 12
Music Disc Operation 13-15
MP3 Disc Operation 15-16
Movie Disc Operation 17-19
Setup Menu 19
USB Input 20
Audio Input 21
Reset Button 21
Additional Feature 22
Installation 23
Speaker Connections 24
Wiring and Auxiliary Connections 25
Safety Instructions 26
Warranty 27
Button Locations and Functions
3
1. Power On/Off: Press to turn the unit on or off.
2. Radio Station Recall Buttons (1-3): Press and release when recalling preset radio stations. Press and
hold until the preset number appears to memorize a radio station.
3. Eject Button ( ): Press to eject the disc.
4. Disc Slot: To play a disc, insert the disc into slot with label facing up.
5.
Display Area: This area displays all function information for the radio, clock and disc player.
6. Radio Station Recall Buttons (4-6): Press and release when recalling preset radio stations. Press and
hold until the preset number appears to memorize a radio station.
7.
Display Dimmer Button
(DIM)
:Press to select the desired level of brightness of the display.
8. Repeat Button:
Disc Mode: Press to repeat a music disc track. Press again to cancel.
9. Music Disc Intro Button:Press to preview each track on the music disc for 6 seconds. Press again to
cancel.
10. Music Disc Random Button (RANDM): Press to play all the tracks on the music disc in random order.
Press again to cancel.
11. Radio Scan Button: Press this button and the tuner will scan up, pausing for 5 seconds at each
strong station. Press the button again to cancel the scan function.
12. Radio Seek Button: Press this button and the tuner will seek up to the next strong station and stop.
13. Infrared Eye: Receives the signals from the remote control.
MHz
147
9
10
13
14
15
5
3
8
11
12
16
17
18
1920212223
25
26
27
28
29
24
26
4
Button Locations and Functions (Continued)
14. Play/Pause and Mute Button ( ):
Radio and Multimedia Input Modes: Press to mute volume level. Press again to restore.
Disc Mode: Press to pause disc play, press again to resume play.
15. USB/Disc Selection Button: Press to choose Disc and USB input modes.
16. Seek Up ( ) Buttons:
Radio Mode: Press to tune the radio to a higher frequency.
Disc Mode: Press to search for the beginning of next track or chapter.
17. AM/FM Radio Selection Button: Press to choose Radio mode. Sequential presses will select radio
bands: 1 MHz (FM), 2 MHz (FM), 3 MHz (FM), 1 KHz (AM) and 2 KHz (AM).
18. Seek Down ( ) Buttons:
Radio Mode: Press to tune the radio to a lower frequency.
Disc Mode: Press to search for the beginning or previous track or chapter.
19. Volume and Select Knob: Rotate to increase or decrease the volume level. Press to select the sound
controls: Bass, Treble and Balance.
20. Auxiliary Input Selection Button (AUX): Press to select Auxiliary Rear/Front Audio input mode.
Note: When the front 3.5mm audio input socket is being used the rear audio input is deactivated.
21. Auxiliary Audio Input Jack (AUX): Press the AUX button “AUX” appears in the display then plug in a
device via the 3.5mm audio input plug.
22. Reset Button: Press to reset the unit to it’s default settings.
23. USB Input: Press the USB/DISC button until “DISC” appears in the display. Then plug in your USB
device. “USB” will then appear in the display.
Note: The RV5070 will control the USB audio device. (See “USB Input” for more details).
24. Speaker Selection Buttons (A, B and C): Switches the speaker sets on and off. Refer to the LED indi-
cators above the button to determine if the speaker set is on or off.
25. Sleep Button (SLP): Sets the sleep timer. (See “Sleep Timer Operation” for more details).
26. Alarm Button (ALRM):Sets the alarm. (See “Alarm Operation” for more details).
27. Display Button (DISP): Press to display the clock or frequency in radio mode, track in music disc
mode, chapter and elapse time in movie disc mode. Press and hold to perform clock setting functions
(See “Setting the Clock” for more details).
28. Radio AS/PS Button: Automatic radio station memory storing (AS) and Preset radio station scanning
(PS). (See “AM/FM Operation” for more details).
29. Equalizer and Loudness Button (EQ/LOUD): Press to select between the preset sound equalization
settings. Press and hold the button to boost high and low tones at low volume levels (loudness).
5
Remote Control Button Locations and Functions
1. Power On/Off Button ( ): Press to turn the
unit on or off.
2. Menu Button: Press to access the Menu screen
in movie mode.
3. Sound Control Button (VOL/TONE): Press to
select the sound controls: Bass, Treble and
Balance.
4. Setup Button: Displays the on-screen SETUP
menu.
5. Volume Buttons (VOL / VOL ): Press VOL
to increase or VOL decrease the volume level.
6. Display Button (DISP): Press to toggle through
the available display information.
7. Repeat Button:
Disc: Press to repeat a music disc track or to
repeat a movie disc title or chapter. Press
again to cancel.
8. Random Button:
Disc: Press to play all the tracks on the music disc
in random order. Press again to cancel.
9. Equalizer Button (EQ):Press to select between
the preset sound equalization settings. Press and
hold the button to boost high and low tones at
low volume levels (loudness).
10. Band Button: Press to select the radio mode.
Sequential presses will select radio band:
1 MHz (FM), 2 MHz (FM), 3 MHz (FM), 1 KHz
(AM) and 2 KHz (AM).
11. AS/PS Elapse Button:
Radio: Automatic radio station memory stor-
ing (AS) and Preset radio station scanning
(PS). (See “AM/FM Operation” for more
details).
Disc: Press to display movie information.
12. Audio Button:
Press to select appropriate movie
audio/language setup.
13. Subtitle Button (SUB.TT):
Press to access the
movie disc’s subtitle languages+.
14. Eject Button ( ): Press to eject the disc.
15. Mode Button: Press to select between the dif-
ferent modes: Radio, Disc and Auxiliary.
16. Stop Button ( ): Press to stop disc play.
17. Play/Pause and Mute Button ( ): Press
to pause disc play, press again to resume play.
18. Backwards ( ) or Fast Forward ( )
Disc Play: Press and “BACKWARD X 2”
appears in the display and the disc will play
backwards at 2 times the normal speed.
Press again and “BACKWARD X 4” will
appear. X8 and X20 speeds can also be
selected. Fast Forward button works the
same way but fast forward. Press the
button at any time to resume normal play.
19. Enter Button: Executes the selected item.
20. Navigation Buttons ( , , , ): Moves fea-
ture selection up, down, left or right.
21. Seek Down ( ), Seek Up ( ) Buttons:
Radio Mode: Press to tune the radio to a
lower or higher frequency.
Disc Mode: Press to search for the beginning
or next track or chapter.
22. Slow Button: Press to play the movie in slow
motion.
23. Zoom Button: Press to enlarge or reduce the
movie’s on-screen image.
24. Numeric Buttons (1, 2, 3, 4, 5, 6, 7, 8, 9,
10/0 and 10+)
MENU MODE
EJECT
POWER
SETUP
VOL
TONE
VOL
ENTER
VOL
DISP
ZOOM SLOW
RANDOM
REPEAT
EQ
1 3
BAND
AS/PS
ELAPSE
AUDIO SUB.TT
2
4 65
7 98
10/0 10+
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
6
General Operations
Power On/Off:
Press the button to turn the unit On/Off.
Selecting a Play Source:
To select a play source, press one of the follow-
ing mode buttons:
AUX: Audio Input Front (AUX),
AM/FM: AM
(KHz) or FM
(Mhz)
Radio Band (RADIO)
USB/DISC: USB Input (USB) or Disc (DISC)
Dimming the Display:
Press the DIM button to select the desired level
of brightness for the display area.
Display Selection:
Press the DISP button to display the clock.
Press again to return to previous display.
Press and hold to perform clock setting func-
tions (See “Setting the Clock” for more details).
Volume:
Increase the volume by rotating the Volume
knob clockwise. Decrease the volume by rotat-
ing the Volume knob counterclockwise.
Sound Controls
MHz
MHz
7
Sound Controls
Bass:
Select the Bass mode by pressing the VOLUME
knob. Increase the Bass by rotating the knob
clockwise. Decrease the Bass by rotating the
knob counterclockwise. After 6 seconds control
reverts back to volume control.
Bass, Treble and Balance Control
Select the desired sound mode by pressing the VOLUME knob. The modes will be displayed in the fol-
lowing order: Bass, Treble, Balance and Volume.
Balance:
Select the Balance mode by pressing the VOLUME
knob. Adjust the Balance by rotating the knob.
R -
- L = Equal sound Right and Left
R 7 = Right speaker only
L 7 = Left speaker only
After 6 seconds control reverts back to volume
control.
Treble:
Select the Treble mode by pressing the VOLUME
knob. Increase the Treble by rotating the knob
clockwise. Decrease the Treble by rotating the
knob counterclockwise. After 6 seconds control
reverts back to volume control.
Equalizer (EQ):
Press the EQ button to choose between the
preset equalizer settings: Normal, Classic, Rock,
Pop and Jazz as indicated in the display area.
Loud:
To boost high and low tones at low volume
levels, press and hold the EQ button until “LOUD
ON” appears in the display. To deselect, press
and hold the EQ button again until “LOUD OFF”
appears in the display.
Hold
8
Sound Controls (Continued)
Mute:
Press the MUTE button to mute the volume
level. Press the MUTE button again to restore the
volume.
Speaker Selection
Selecting Speaker Sets:
• Press the Abutton to toggle speaker set A on
and off. The LED above SPEAKER A lights up
when speaker set A is on.
• Press the Bbutton to toggle speaker set A on
and off. The LED above SPEAKER B lights up
when speaker set B is on.
• Press the Cbutton to toggle speaker set A on
and off. The LED above SPEAKER C lights up
when speaker set C is on.
Setting the Clock
1. Press the DISP button until the clock appears in
the display.
2. Press and hold the DISP button until the Hours
number starts flashing.
3. Rotate the Volume knob until the correct Hour
appears in the display.
Note: When setting the clock make sure to
select the correct AM or PM.
Hold
9
Sleep Timer Operation
Setting the Sleep Timer:
1. Press the SLP button and “SLEEP 10” appears
in the display.
2. Keep pressing the SLP button again until the
desired sleep time appears in the display (0,
10, 20, 30, 40, 50, 60, 70, 80 minutes).
3. Wait 5 seconds and the display will return to
normal operation and “SLEEP” will appear in
the display.
4.
After the designated sleep timer has expired
the unit will turn off automatically
.
Cancelling the Sleep Timer:
1. Press the SLP button until “0” is displayed.
2. Wait 5 seconds and the display will return to
normal operation.
Setting the Clock (Continued)
4. Press the Volume knob and the Minute indica-
tors will start flashing.
5.
Rotate the Volume knob until the correct Minutes
appears in the display
. Wait 5 seconds and the
colon between the hours and the minutes will
start flashing indicating the clock is set.
10
Alarm Operation
Setting the Alarm Timer:
1. Press the ALM button and the clock will
appear in the display with the Hour number
flashing.
2. Rotate the Volume knob until the correct Hour
appears in the display. “ALARM” will appear in
the display indicating the alarm is activated.
Note 1: When setting the alarm clock make
sure to select the correct AM or PM indicator.
Note 2: When setting the alarm DO NOT use
12:00 AM, because that time is used to cancel
the alarm.
3. Press the Volume knob and the Minute indi-
cators will start flashing.
4.
Rotate the
Volume
knob until the correct
Minutes appears in the display
. Wait 5 seconds
and the colon between the hours and the min-
utes will start flashing. “ALARM” will appear
in the display indicating the alarm is set.
5. Press the POWER button to turn the unit off.
The unit will automatically turn on when the
set alarm time is reached.
Cancelling the Alarm Timer:
Follow the procedures above except set the
alarm time to “A AM 12:00”. “ALARM” will dis-
appear in the display indicating the alarm has
been cancelled.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Magnadyne Récepteur
Magnadyne
Magnadyne RV6200S Manuel utilisateur
Magnadyne
Magnadyne LS5050CD Fiche technique
Magnadyne
Magnadyne Linear Series Manuel utilisateur
Magnadyne
Magnadyne M9 Manuel utilisateur
Magnadyne
Magnadyne RV4500 Fiche technique
Magnadyne
Magnadyne Linear Series Manuel utilisateur
Magnadyne
Magnadyne M11 Manuel utilisateur
