Magellan MG-6130 Manuel utilisateur
All-In-One Wireless Console
(MG6130 / MG6160)
User Guide
We hope this product performs to your complete satisfaction.
Should you have any questions or comments, please visit www.paradox.com
MG6130 MG6160
Magellan 1
Table of Contents
Overview.................................................... 2
Introduction......................................................... 3
Basic Operation .................................................. 6
Arming / Disarming .................................. 9
Arming................................................................. 9
Disarming.......................................................... 12
Fire Alarms........................................................ 13
Panic Alarms..................................................... 16
Consumer Features................................ 18
Message Center................................................ 18
FM Radio Feature (MG6160 only).................... 19
Alarm Clock....................................................... 20
Speakerphone (MG6160 only).......................... 21
Chime Zones..................................................... 22
Console Keypad Settings.................................. 23
Time and Date .................................................. 23
Programmable Outputs (PGMs) ....................... 23
Wireless Keypad............................................... 24
Wireless Repeater ............................................ 24
Wireless Siren................................................... 25
Trouble Display.................................................. 25
Making a Service Call (MG6160 only)............... 26
Demo Mode....................................................... 26
X10 Automation (MG6160 only)........................ 26
Access System Features by Phone....... 27
Access System Features by Phone................... 27
Advanced Features................................. 29
Programming User Codes................................. 29
Adding a Remote Control to an Existing User... 30
Setting the Language ........................................ 31
Voice Reporting................................................. 31
Utility Reporting ................................................. 32
Pager Reporting ................................................ 33
Bell Cut-Off Timer.............................................. 34
System Test....................................................... 34
Zone Labels....................................................... 34
2User Guide
Chapter 1: Overview
What’s in this chapter:
• Introduction
• Basic Operation
This chapter will give you a basic overview of your Magellan system. It will cover Magellan’s light indicators,
keypads and remote controls. This chapter also includes sections explaining how to use this guide as well as
a list of conventions used throughout the manual.
Overview 3
Introduction
Magellan is the first security system to combine security with popular consumer features and a stylish design. Magellan looks different
from anything else in the security industry. Install it anywhere in your home or small business–Magellan blends beautifully with any décor.
Leave a message or use your system as a telephone, alarm clock or monitoring device.
Magellan consists of wireless detection devices installed at specific entry and exit points, as well as other vulnerable areas, such as
windows. These devices protect the premises and communicate with Magellan’s main console. If you have armed the system and a
device detects a breach, a siren will be activated and your monitoring station will immediately be notified by phone. Choose from wireless
motion detectors with pet immunity, door contacts, and remote controls that automate your most frequently used security functions.
With Magellan you have security and so much more:
• Built-in FM radio (page 19)*
• Speakerphone (page 21)*
• Family message center (page 18)
• Telephone access to system features (page 27)
• Alarm clock (page 19)
• Chime zones (page 22)
• Voice, Utility and Pager reporting (page 31 to page 33)
• One-touch arming (page 11) and panic keys (page 16)
• Full, Force, Stay, Instant and Automatic arming (page 9)**
• X10 home automation (page 26)*
• 32 wireless zones, 16 remote controls and 16 users available
* Available with the MG6160 only.
** Please note that Force arming and Auto-arming are not for use in UL installations.
4User Guide
How to Use this Guide
This manual employs an icon-based instruction format to display the steps required to use Magellan’s features. The icon-based
instructions are designed to be used in conjunction with the on-screen instructions being displayed on the Magellan console. In other
words, as you are following the instructions shown in this guide, you should also be reading what is being displayed on the LCD
screen. All of the icons displayed in this guide are explained in Conventions on page 5.
Example
When setting the Magellan console’s time and date (page 23), the following will be displayed:
A- Press the [MENU]action key (the right action key located under the right
side of the LCD screen).
B- Press the [3] key on the main keypad.
C- Select the time format that Magellan will follow; press the [12HRS]action
key (the left action key under the LCD screen) to select the 12-hour
format or the [24HRS]action key (the center action key under the LCD
screen) to select the 24-hour format.
D- Program the desired time (following the time format selected before) and
then the date.
D
CBA
Menu Enter the
time and
date
12Hrs 24Hrs
Select the
console’s
time format
or
Overview 5
Conventions
Icon Definition Icon Definition
Reference to another manual or guide. Enter the System Master code on the main keypad.
Warning or important information. Enter your User code on the main keypad.
Reminder or suggestion. Enter a time value (such as when programming
Magellan’s date and time) on the main keypad.
[DATA]
or
[KEY]
Type required data or press the designated key on
either the main or center keypad. Enter numerical data for the specified feature on the
main keypad.
Record voice label when prompted or speak into the
Magellan console when using Magellan’s
Speakerphone feature (see page 21).
Press a button on a remote control.
Press the specified action key. See Figure 1 on page
6. Wait the specified amount of time before performing
another action.
Press the specified key on the main keypad. See
Figure 1 on page 6. Call Magellan through a standard touch-tone
telephone.
Press the specified function key. See Figure 1 on
page 6. Press any key on the console.
6User Guide
Basic Operation Figure 1: Basic Overview
*= MG6160 only
Action Keys
Center Keypad
(see page 8)
Main Keypad
(see page 8)
Light Indicators:
Orange INFORMATION light
ON: There is a trouble in the system, an alarm has just
occurred or a zone has been bypassed.
Flashing: There is a power failure and the Magellan console is
receiving no power.
Red ARMED light
ON: System is Regular armed.
Slow Flashing: System is Stay armed.
Rapid Flashing: System is in alarm.
Green READY light
ON: All zones closed. System can be armed.
Flashing: System in Exit Delay mode.
Orange MESSAGE light
Flashing: A voice message has been recorded. See Message
Center on page 18.
Function Keys
Message Key
Press once: Play a recorded voice message.
Press & hold: Record message. See page 18.
Radio Tuner / Alarm Clock Key
Press once: Turn ON/OFF radio*. See page 19.
Press & hold: Enable/disable alarm clock. See page 19.
Stay Arming Key
Press once: Enter user code to Stay arm
Press & hold: One-touch Stay arm. See page 10.
Regular Arm Key
LCD Screen
(see page 7)
Overview 7
LCD Screen
Remote Controls
Alarm clock feature enabled (see page 19).
Instructions and/or messages appear in
this line
The function or action associated with
the action key directly underneath the
text appear in this line. Press the
appropriate action key to access the
function.
Information symbol. This means:
• There is a trouble in the system
(see page 25).
• There is an alarm in memory
(see page 13).
• Zones or a zone is currently
bypassed (see page 10).
Remote Control Default Settings
Your installer can add other functions and/or change the default settings of your remote
controls. To use the functions programmed in your remote control, press and hold the desired
key(s) for at least two seconds. Your remote control has been programmed with the following
features:
REM1 REM2
= Force Arm (page 10)
= Disarm (page 12) / control radio volume
(page 20)
= Turn FM radio ON/OFF* (page 19)†
= Scroll through programmed radio
stations in memory* (page 19)†
= Request feedback from the Magellan
system (see REM2 Reference &
Installation Manual for more information)*
= Turn FM radio ON/OFF* (page 19)‡
= Scroll through programmed radio
stations in memory* (page 19)‡
‡= REM2 only
†= REM1 only
* Available with the MG6160 only
8User Guide
Magellan’s Keypads
Use this keypad to enter User
codes, required data and/or to
select desired menus.
Main Keypad Center Keypad Use keys [1] to [16] on the center keypad for the following:
Zones 1 to 32
OFF = Zone closed (ok)
ON = Zone opened
Flashing = The zone has been tampered
Fast Flashing = Zone is in alarm
Press once = Listen to zone’s label (e.g.: “Front door”) and status
Users 1 to 16
When programming a user:
OFF = User not programmed
ON = User programmed
Press once = Listen to user label and program or edit a user
X10 programming (MG6160 only)
This keypad is also used when programming and using
Magellan’s X10 features. Refer to Magellan’s X10 Instruction
Guide which can be downloaded for free from our website at
paradox.com.
Phone Key
Press once = Make a telephone call or answer an incoming call.
Press again to hang up. See page 21.
Fast flashing = Speakerphone in use. See page 21.
Volume Keys
Increase/decrease system volume.
17-32 Key
Off = Viewing zones 1 to 16
On = Viewing zones 1 to 16,
and a zone above 16 is open
Flashing = Viewing zones 17 to 32
Press to toggle zone view (1-16 or 17-32)
Zone 1-16 display has priority over 17-32. If the center keypad is in 1-16
mode and an alarm occurs in 17-32, the display will switch to 17-32.
However if a zone opens in 1-16, the display will switch back to 1-16.
Autres manuels pour MG-6130
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Magellan Système de sécurité
Magellan
Magellan MG-6130 Mode d'emploi
Magellan
Magellan MG-2WPGM Manuel utilisateur
Magellan
Magellan MG6250 Manuel utilisateur
Magellan
Magellan MG-6060 Manuel utilisateur
Magellan
Magellan MG-6060 Manuel utilisateur
Magellan
Magellan MG-6130 Manuel utilisateur
Magellan
Magellan MG-6060 Mode d'emploi
Magellan
Magellan MG6250 Mode d'emploi
Magellan
Magellan MG-6060 Mode d'emploi
Magellan
Magellan MG32WK Manuel utilisateur
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur