EN 4
English
Usage
In general, this device is designed to receive control data over Ethernet
(Art-Net / Streaming ACN) or USB and convert the data into supported SPI
protocols. It is a hardware interface to be connected towards various types of
controllable, digital LEDs. Do not use the interface for any other, deviating
purpose. The device can be connected to and disconnected from USB or Ethernet
networkduringuseandwithout a reboot(HotSwapping&Plugand Play). Multiple
interfaces can be used at the same time.
Technical Specifications
Supply Of Power:
(See p. 6 – p. 12)
Power Consumption:
Network Protocols:
RDM Role:
Data Output:
Supported LEDs:
(As of July 2021 –
See www.madrix.com
for the latest information.)
Ports:
Ethernet:
Ethernet Switch:
USB:
Handling:
Case:
Dimensions:
Weight:
Temperature Range:
Relative Humidity
IP Rating:
Certificates:
Warranty:
DC 5 V – 24 V; over
A) 2-pin, pluggabable screw terminal (12 A max.),
B) 5 V USB, C) Port 1 or 2 sourced from LEDs;
6 A max. load per port when supplying through to LEDs
< 1.5 W (300 mA) during normal operation (500 mA max. fused)
Art-Net (I, II, 3, 4, incl. ArtSync), Streaming ACN (sACN / ANSI E1.31)
Acts on commands and replies to requests with its own status
and sensor data via ArtRdm (RDM Responder)
8x 512 channels SPI TTL (Maximum output per port:
680 RGB LEDs / 512 RGBW LEDs / 2048 1-channel LEDs)
APA101, APA102, APA104, APA106, GS8206, GS8207, GS8208, GW6201,
GW6205, LPD1882S, LPD6803, LPD8806, MBI6024, MBI6120, MY9291, P9883,
SJ1221, SK6112, SK6805, SK6812, SK6813, SK6822, SK9816, SK9822,
SK9826, SM16703, SM16716, TLC5973, TLS3001, TLS3008, TM1804, TM1809,
TM1812, TM1814, TM1829, UCS1903, UCS2903, UCS2904, UCS512B3,
UCS8904, UCS9812S, WS2801, WS2803, WS2811, WS2811S, WS2812,
WS2812B, WS2813, WS2815, WS2818, WS2822S, WS2822S Addressing
2x ports (Via 2x 4-pin, pluggable screw terminals)
2x RJ45, Auto MDI-X, daisy-chain support, 10/100 MBit/s
(Compatible with 1 GBit/s)
Lookup Table (ALU) for 1024 unicast MAC addresses
1x port, USB 2.0, type-B female socket
5 status LEDs (+4 network status LEDs)
Non-conductive, V-0 flammability rating (UL94 test method),
designed for 35 mm DIN-rails or wall mounting
90 mm x 70 mm x 46 mm (Length x Width x Height)
110 g | 132 g incl. screw terminals and wall mounts
-10 °C to 70 °C (Operating) | -20 °C to 85 °C (Storage)
5 % to 80 %, non-condensing (Operating / Storage)
IP20
CE, EAC, FCC, RoHS
5 years of limited manufacturer's warranty
