Mad Catz REACTOR Manuel utilisateur
Wii Remote Manual
Page 1 of 10
Set Up of the Wii Remote
The remote uses two AA batteries. Use only high quality alkaline batteries for
the best game play experience and longevity of battery life. Please read the
following information carefully.
•Installing Batteries
•Synchronizing a Wii Remote With the Wii Console
•Turn the Rumble feature on or off
•Check battery levels
•Adjust volume of internal speaker
Installing the Batteries
Important Note: If you would like to use rechargeable batteries, the
only type of battery recommended are Nickel Metal Hydride batteries.
When it comes to using rechargeable batteries, you must follow
manufacturer guidelines for safety and proper usage. Failure to do so
could cause damage to the Wii Remote and void the warranty.
1. Remove the battery cover on the back of the Wii Remote and insert two
AA batteries, using the plus (+) and minus (-) guides in the Wii
Remote's battery compartment to insert the batteries in the proper
direction.
2. Be sure to insert the minus (-) end first when inserting new batteries,
and remove the plus (+) end first when replacing the batteries.
3. Replace the battery cover.
Wii Remote Manual
Page 2 of 10
Synchronizing the Wii Remote with the Wii Console
Synchronizing the Wii Remote to a Wii console allows the Wii Remote to
communicate with the console. The Wii Remote included with your system
should already be synchronized to your console. However, all additional Wii
Remotes you use with your system also need to be synced in order to function
properly..
There are two different modes of synchronizing (syncing):
•STANDARD MODE - The Standard Mode procedure is used when
adding additional Wii Remotes to your system or if you want to
re-synchronize your original Wii Remote. Once synchronized, the Wii
Remote will stay synced to the console unless you overwrite the
settings by syncing the remote to a different console. For instructions
on Standard Mode syncing, please click here.
•ONE TIME MODE - This mode allows you to temporarily use your
remote on a Wii console other than your own, or to use a friend's
remote on your console. It can also be used to change the order of the
Wii Remotes, without the need to turn off the Wii console. One Time
Mode does not delete the Standard Mode setting stored in the Wii
Remote. In this mode, the Wii Remote will only communicate with the
Wii console while the power is on. When the power is turned off, the Wii
Remote will lose its sync with the Wii Console. For instructions on One
Time Mode setup, please click here.
Note: Only a Wii Remote in Standard Mode can turn the Wii console power ON
or OFF.
Standard Mode Synchronization
Note: Make sure you have placed batteries in the Wii Remote (how to).
1. Press the Power button on the Wii console to turn it on.
2. Open the SD Card Slot cover on the front of the Wii console. Remove the
battery cover on the back of the Wii Remote you wish to sync up.
Wii Remote Manual
Page 3 of 10
3. Press and release the SYNC button on the inside of the SD Card
compartment on the console. Press and release the SYNC button just
below the batteries on the Wii Remote.
4. When the Player LED blinking stops, the syncing is complete. The LED
that is illuminated indicates the player number (1 through 4).
This procedure must be followed for each additional Wii
Remote added to your system.
One Time Mode Synchronization
Note: This mode temporarily removes Standard Mode synchronization
setup for all Wii Remotes until the power of the Wii console is turned off.
When the power is turned back on again, the Standard Mode settings
will return.
1. Press the HOME Button on a Wii Remote that is synchronized with the
Wii console.
Wii Remote Manual
Page 4 of 10
2. Select the Wii Remote Settings option from the Home Button menu.
3. Select the Reconnect Option.
4. Press the 1 and 2 Buttons at the same time on the Wii Remote that you
want to synchronize with the console. If you are syncing multiple Wii
Remotes, press the 1 and 2 Buttons on each Wii Remote
immediately (without a significant pause) in the order you want them
synced. The order in which you synchronize Wii Remotes determines
the player order (1 through 4) for multiplayer games. The Player LED
will blink during the syncing process. When the blinking stops, the
connection is complete.
Wii Remote Manual
Page 5 of 10
Turn the Rumble feature on or off
The Wii Remote has a built-in rumble device that will shake the Wii
Remote at certain points while using the Wii. The following information
describes how to turn this feature "on" or "off."
•Not all games use the Rumble feature.
•Turning the Rumble feature off can extend battery life of the Wii
Remote.
2. Press the HOME Button on a Wii Remote that is synchronized with the
Wii console.
3. Select the Wii Remote Settings option from the Home Button menu.
4. Select the Rumble "On" or "Off".
Wii Remote Manual
Page 6 of 10
Check battery levels
A fresh set of alkaline batteries should last, depending on amount and
type of use, up to 35 hours. This can vary greatly based on certain
factors, such as Wii Remote Speaker Volume, Rumble, battery quality
and age, and type of game being played.
Important Note: If you are using rechargeable batteries, the only
type of battery recommended are Nickel Metal Hydride batteries. When
it comes to using rechargeable batteries, you must follow manufacturer
guidelines for safety and proper usage. Failure to do so could cause
damage to the Wii Remote and void the warranty.
There are two ways to check the Wii Remote's battery levels:
•Remove the battery cover and press the Red "Sync" button. The number
of lights flashing indicates the Wii Remote's battery strength. Four
flashing lights indicates full strength, with one light flashing indicating
the lowest level.
or
•Use the HOME Menu to check battery level of each Wii Remote:
1. Press the HOME Button on a Wii Remote that is synchronized with
the Wii console.
Wii Remote Manual
Page 7 of 10
2. Select the Wii Remote Settings option from the Home Button
menu.
3. The battery level of all synced Wii Remotes is dispalayed along
the bottom. Four bars indicates a full charge, with one being the
lowest charge.
Adjust volume of internal speaker
The Wii Remote has a built-in speaker that is used at certain points
while using the Wii. The following information describes how to adjust
the volume of the Wii Remote's speaker.
•Not all games use the built-in speaker.
•Turning the speaker volume down can extend battery life of the
Wii Remote.
•This procedure must be performed on all Wii Remotes you wish to
adjust the volume of.
Wii Remote Manual
Page 8 of 10
1. Press the HOME Button on a Wii Remote that is synchronized with the
Wii console.
2. Select the Wii Remote Settings option from the Home Button menu.
3. Move the cursor over the "-" and "+" buttons to increase or decrease the
volume levels. You will hear a sound from the speaker each time you
adjust the setting. The sound approximates what the volume level
would be at that setting.
Wii Remote Manual
Page 9 of 10
Using the Wii Remote
This page details the common controller positions of the Wii Remote. If you
need assistance with setting up your Wii Remote (installing batteries, attaching
the wrist strap, or syncing to the console), click here.
Important Note: If you would like to use rechargeable batteries, the only
type of battery recommended are Nickel Metal Hydride batteries. When it
comes to using rechargeable batteries, you must follow manufacturer
guidelines for safety and proper usage. Failure to do so could cause damage to
the Wii Remote and void the warranty.
Wii Remote Configurations:
Depending on the game, the way you hold and operate the Wii Remote will
vary. You may need to hold the remote in either one or two hands. Read the
instruction booklet for the game you are playing for information about what
kind of game play control is required for that game.
The remote can be used by itself, or in different configurations when connected
up to other Wii accessories. These configurations can be used right or
left-handed.
Wii Remote Manual
Page 10 of 10
Basic Operations:
The Wii Remote redefines the controller with its motion-sensitive capabilities.
Below are some of the common motions Wii players can expect to perform
while enjoying their games.
Point: Point the Wii Remote
at a specific place on the TV
Screen
Waving: Wave the Wii
Remote back and forth from
side to side
Pushing or Pulling: Move the
Wii Remote forward and
backward.
Holding and Grabbing: Point the Wii Remote at a specific
place on the TV screen and move the Wii Remote while
holding down a button.
Twisting: Move the Wii
Remote in a twisting motion
by rotating your arm.
Table des matières
Autres manuels Mad Catz Manettes de jeux vidéo
Mad Catz
Mad Catz L.Y.N.X. 3 Manuel utilisateur
Mad Catz
Mad Catz Hand Held Racing Wheel Manuel utilisateur
Mad Catz
Mad Catz 900MHz DUAL FORCE 2 Manuel utilisateur
Mad Catz
Mad Catz CUBICON Manuel utilisateur
Mad Catz
Mad Catz LYNX Manuel utilisateur
Mad Catz
Mad Catz street fighter V arcade fightstick tournament edition... Manuel utilisateur
Mad Catz
Mad Catz Street Fighter V FightPad PRO Manuel utilisateur
Mad Catz
Mad Catz CAT 7 Manuel utilisateur
Mad Catz
Mad Catz MLG Pro Circuit Manuel utilisateur
Mad Catz
Mad Catz DUAL FORCE 2 Manuel utilisateur
Mad Catz
Mad Catz LYNX XBOX Manuel utilisateur
Mad Catz
Mad Catz C.T.R.L. R Manuel utilisateur
Mad Catz
Mad Catz F.L.Y. 5 Manuel utilisateur
Mad Catz
Mad Catz ADVANCED CONTROLLER Manuel utilisateur
Mad Catz
Mad Catz WIRELESS Z-CHUK 5746-MUG-R2 Manuel utilisateur
Mad Catz
Mad Catz RB2 9766 MUG Manuel utilisateur
Mad Catz
Mad Catz ADVANCED CONTROLLER Manuel utilisateur
Mad Catz
Mad Catz ROCK BAND 3 MIDI PRO-ADAPTER 96071 Manuel utilisateur
Mad Catz
Mad Catz Cyborg F.L.Y. 9 Manuel utilisateur
Mad Catz
Mad Catz Rock band 3 Manuel utilisateur
