Mackie Ultramix Manuel utilisateur
39
SOFTWARE INSTALLATION
Now, as The Band sings “Across the Great Divide,” pick the
sections that are right for you and dive in. Mac owners start
here, PC owners proceed to page 52.
If you are unsure of any standard Macintosh or PC maneuvers,
such as clicking mouses and copying files, etc., please refer to
your computer manuals—you’ll need to know those basics.
MACINTOSH SYSTEMS
You can either install UltraMix Pro by itself or with OMS or
FMS. If you are already using OMS or FMS, you should in-
stall UltraMix Pro by itself to avoid accidentally erasing your
studio setup.
NOTE: OMS and FMS are very similar in function and
setup. So we’re going to show an OMS example – FMS
will be about the same. Consult their respective manu-
als for more info.
1. Restart your Mac with Extensions off. (Hold down the
Shift key while restarting.) Insert the UltraMix Install dis-
kette and double-click on its icon.
2. Read the “Read Me” file before going any further. It may
include information that has been changed or updated since
the publication of this manual.
40
3. Double-click the Installer icon.
Then you’ll see the following:
4. Click on Continue. Next you’ll see this screen:
41
5. To install both UltraMix Pro and OMS, click the Install
button. To install UltraMix Pro without OMS, click on the
Custom button and choose the UltraMix Pro Only option.
6. Click Install.
7. Follow the prompt to select where you want UltraMix in-
stalled. Click Install once more, with feeling.
The installer copies UltraMix Pro, OMS Setup, the OMS sys-
tem extension, and the OMS Folder into their proper places
on your hard disk.
NOTE: The OMS system extension is placed in the Exten-
sions folder and is titled “Open Music System.” Don’t
confuse the OMS extension with the OMS Folder that is
installed directly in the System Folder. The OMS Folder
contains files such as the Mackie Device info file, which
allows OMS to support Mackie devices.
42
SETTING UP OMS
1. Double-click the OMS Setup icon.
If you’re installing OMS for the first time, the following
screen will appear:
2. Click OK.
3. Check the box (Printer Port or Modem Port) correspond-
ing to the port your MIDI interface is plugged into.
43
4. Click Search. You will then see the following screen,
which will show you that OMS is searching for any MIDI in-
terfaces connected to the port(s) you checked in step 3.
5. Then you’ll see a screen that indicates which interfaces
OMS found in its search. If OMS found the correct interface,
click OK.
If you run into any problems locating a MIDI interface, read
the instructions in the dialog box on-screen and heed their
advice. If you’re still having problems, inspect or replace
your cables. Also, make sure that any “thru” switches on the
MIDI interface are set to “MIDI.”
44
6. Next, you’ll see this screen while OMS searches for MIDI
devices, like synths and such, that are connected to the
MIDI ports on your MIDI interface.
7. When OMS finishes this search, it will display this dialog box:
Read the instructions, and if everything’s peachy, click OK.
45
8. At this point you’ll be prompted to save your OMS studio
setup. Go fer it.
OMS opens a studio setup window that lists your MIDI
interface(s).
9. Choose Preferences from the Edit menu.
You’ll then see this dialog box:
46
If you use AppleTalk, make sure both of the AppleTalk-re-
lated checkboxes are checked. Uncheck the “Report serial
overrun…” checkbox. Leave the “SerialDMA” box alone—if
OMS decides your system needs this, the box will be
checked. If not, then OMS has decided you don’t need it. Do
not second guess OMS!
12. If OMS found devices in its MIDI device search, indi-
cated by the icon showing a keyboard with a question mark,
doubleclick on that icon.
If it didn’t, choose New Device from the studio menu.
47
You will then see this dialog box:
12. For Manufacturer, choose Mackie, and for model, choose
Ultra-34.
13. Select Is Controller and then click underneath the num-
ber 16 in the Receive Channels field.
14. Click the box next to MIDI Time Code under the Sends
column.
The dialog box should look like it does below. Click OK.
48
15. When you’re done customizing your studio setup, choose
Save from the File menu.
You can use OMS to create as many different studio setups
as you want, but OMS recognizes only one setup as current
at any given time. If you do not make your new studio setup
current, OMS (and UltraMix) may not recognize the devices
that you defined in it. If a studio setup is current, OMS will
display a diamond to the left of the studio setup name in its
window title.
12. To quit Setup, choose Quit from the File menu.
NOTE: If you have a multi-port MIDI interface, click on
the number to the left of the device you just added, as
shown in the picture below, and type the number of the
port that your Ultra-34 is connected to. Our setup shows
the Ultra-34 on port 1 and the SY-88 on port 2 of the
Studio 4 interface. Both show two-way MIDI communi-
cation with the interface.
Autres manuels pour Ultramix
1
Table des matières
Autres manuels Mackie Logiciel
Mackie
Mackie C4 Commander Manuel du propriétaire
Mackie
Mackie DIGITAL XBUS - SOFTWARE Manuel utilisateur
Mackie
Mackie C4 Commander Manuel utilisateur
Mackie
Mackie Stereo and Mono Side chain Compressor Manuel utilisateur
Mackie
Mackie Ultramix Instructions de montage
Mackie
Mackie FINAL MIX VST - FOR TRACKTION Manuel utilisateur
Manuels Logiciel populaires d'autres marques
PS Audio
PS Audio PowerPlay Manuel du propriétaire
Brady
Brady LOCKOUT PRO 3.0 Manuel de service
Avaya
Avaya Interaction Center Manuel utilisateur
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuel
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur
Oracle
Oracle Application 9i Manuel utilisateur
Acer
Acer RDM Manuel utilisateur
Canon
Canon Vixia HF21 Manuel utilisateur
Canon
Canon ZR950 Manuel utilisateur
Samsung
Samsung Auto Backup Manuel utilisateur
Polycom
Polycom Vortex EF2201 Instructions d'installation et d'utilisation
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuel utilisateur