Mackie D8B Manuel

Mackie Dual D8B Setup

1. Connect the Ethernet port of the master D8B to the Ethernet port of the Slave

D8B using an “EHERNET CROSSOVER” cable.

2. Connect the Word Clock OUT of the “Master” to the Word Clock IN “Slave”

D8B, using a 75ohm BNC cable.

3. Connect the output of the ALT I/O card from the “Slave” to the ALT I/O input

of the “Master”.

4. On the “Master” D8B, in the SETUP menu, do the following…

a. In the NETWORK menu, set the Network Channel to “NETWORK

CHANNEL 1”. In the Console Linking section, select all the functions

you would like to have linked.

b. Under the FTP MENU, set the IP Address to 10.10.28.20 and the

Subnet Mask to 255.255.0.0

c. In the DIGITAL I/O page, set the sample rate to that of your session

and make sure the clock source is set to “Internal”.

5. On the FX Bank of the “Master” D8B, disable ‘Solo Mute’ on the return

channels 1-8 (last 8). To do this, hold the “Alt” button on the console while

pushing the solo button on each channel (This will prevent these channels

from muting when you solo a channel).

6. On the “Slave” D8B, in the SETUP menu, do the following…

a. In the NETWORK menu, set the Network Channel to “NETWORK

CHANNEL 1”. In the Console Linking section, select all the functions

you would like to have linked. In the ALT I/O section, select “BUS

OUTS 1-8”.

b. Under the FTP MENU, set the IP Address to 10.10.28.30 and the

Subnet Mask to 255.255.0.0

c. In the DIGITAL I/O page, set the sample rate to that of your session

and make sure the clock source is set to “Word Clock”.

-In this setup, your Slave D8B will output audio from the Bus outs. These Bus outs

will feed signal to the 8 return channels on the Master D8B. These return channels

will be mixed in with the other channels on the Master to feed the master outputs

and control room outs.

Autres manuels pour D8B

6

Table des matières

Autres manuels Mackie Mixeur musical

Mackie

Mackie ONYX 1220i Manuel utilisateur

Mackie

Mackie MobileMix Manuel utilisateur

Mackie

Mackie CFX 12 Manuel utilisateur

Mackie

Mackie MicroSeries 1202 Manuel utilisateur

Mackie

Mackie Onyx 1620i Guide de l'utilisateur

Mackie

Mackie DL806 Manuel utilisateur

Mackie

Mackie DL806 Manuel utilisateur

Mackie

Mackie Onyx 2480 Manuel utilisateur

Mackie

Mackie Onyx 24-4 Manuel utilisateur

Mackie

Mackie 1402-VLZ3 Manuel utilisateur

Mackie

Mackie DL806 Manuel utilisateur

Mackie

Mackie 3204VLZ4 Manuel d'instructions

Mackie

Mackie CFX MKII Manuel utilisateur

Mackie

Mackie Onyx 1620i Manuel utilisateur

Mackie

Mackie 1202-VLZ Pro Manuel utilisateur

Mackie

Mackie CR1604-VLZ Manuel utilisateur

Mackie

Mackie Onyx 820i Instructions de montage

Mackie

Mackie CFX12 MKII - DIAGRAMS Manuel

Mackie

Mackie DIGITAL XBUS - SOFTWARE Manuel utilisateur

Mackie

Mackie 1642-VLZ PRO Manuel utilisateur

Mackie

Mackie Digital 8Bus D8B v5.1 Manuel utilisateur

Mackie

Mackie 1604-VLZ PRO Manuel utilisateur

Mackie

Mackie ONYX 1220i Manuel utilisateur

Mackie

Mackie 1402-VLZ PRO Manuel utilisateur

Manuels Mixeur musical populaires d'autres marques

Neve

Neve 8816 Manuel utilisateur

Behringer

Behringer EUROPOWER PMP518M Manuel utilisateur

Peavey

Peavey S-32 Sanctuary Series Manuel utilisateur

Rane

Rane MP 4 Manuel utilisateur

True

True T9 Touchscreen Console Manuel utilisateur

Studiomaster

Studiomaster Air Pro 24 Manuel utilisateur

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manuel utilisateur

Roland

Roland M-160 Manuel utilisateur

Yamaha

Yamaha MR1642 Manuel utilisateur

Ecler

Ecler MAC40v Manuel utilisateur

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manuel utilisateur

Veeder-Root

Veeder-Root TLS-350 Series Manuel utilisateur

Alto

Alto APM80.QUAD Manuel utilisateur

Omnitronic

Omnitronic PM-211 Manuel utilisateur

SoundCraft

SoundCraft B400 Manuel utilisateur

Roland

Roland SoundCanvas SC-8820 Manuel utilisateur

CARVIN

CARVIN RX 1200 Manuel utilisateur

Roland

Roland M-16E Manuel utilisateur