MA Metro 750 Manuel utilisateur
Metro 750
PLEASE READ ME FIRST
www.magnumbikes.com
Contents
1.General Introduction
1.1 Welcome .................................................................................................................................................... 01
1.2 Use of Manual ............................................................................................................................................ 01
1.3 Service and Technical Support ................................................................................................................. 01
1.4 E-Bike Components ................................................................................................................................... 01
1.5 Technical Data ........................................................................................................................................... 03
2.Installation and Adjustment
2.1 Handlebar and Stem Assembly ................................................................................................................ 04
2.2 Assembly of the Pedals ............................................................................................................................ 05
2.3 Seat Posistion ............................................................................................................................................ 06
2.4 Saddle Height ............................................................................................................................................. 07
2.5 Saddle Adjustment .................................................................................................................................... 07
3.Battery and Charger
3.1 Overview .................................................................................................................................................... 08
3.2 General Remarks ....................................................................................................................................... 08
3.3 Installing and Removing the Battery ........................................................................................................ 08
3.4 Charging ..................................................................................................................................................... 08
4. Display ....................................................................................................................................................... 09
5.Recommendations and Maintenance
5.1 General Requirements ............................................................................................................................... 17
5.2 Maintenance Schedule .............................................................................................................................. 18
19
6. Warranty .................................................................................................................................................... 20
1.General Introduction
1.1 Welcome
Thank you for purchasing a Magnum electric bike and welcome to the Magnum Bikes family of e-bike
enthusiasts. We encourage you to join our Facebook group “Magnum Bikes Community” which you can
place for Magnum riders to ask questions, have discussions, share recommendations and experiences and
connect with other Magnum Bike enthusiasts.
1.2 Use of Manual
We encourage you to read this manual thoroughly before you take your new E-bike for a ride. It is important
not to overlook the safety instructions and explanations of both traditional and non-traditional bike parts,
as this will offer you a general understanding of your new E-bike. This manual is designed to help you get
the most out of your E-bike, and so we have attempted to answer as many of your potential questions as
possible. Please take a moment to read through the various sections before you get in the saddle.
1.3 Service and Technical Support
This manual is intended as a general overview of your new E-bike, and is therefore not an extensive refer-
ence. For technical support, including information about service, maintenance and repairs, please consult
your local Magnum dealer or our customer support team. You can visit our website (www.magnumbikes.
*Disclaimer
Because it is impossible to anticipate every situation or condition which can occur while riding, this manual
makes no representations about the safe use of bicycles under all conditions. There are risks associated
with the use of any bicycle which cannot be predicted or avoided, and which are the sole responsibility
of the rider. You should keep this manual along with any other documents that were included with your
bicycle. All content in this manual is subject to change without notice. Magnum Bikes makes every effort to
ensure accuracy of its documentation and assumes no responsibility of liability if any errors or inaccuracies
appear within. Assembly and initial adjustments of your Magnum e-bike requires special tools and skills. It
is recommended that this be done by a trained bicycle mechanic if possible.
General
01
1.General Introduction
1.4 E-Bike Components
1. Rear Light 8. Rear Disk Brake 15. Kickstand 22. Front Fender
2. Rear Fender 9. Bungee Cord 16. Crankset 23. Rim
3. Motor 10. Saddle 17. Pedal 24. Front Fork
4. Freewheel 11. Seatpost 18. Controller 25. Quick Release
5. Rear Derailleur Protector 12. Saddle Quick Release 19. Front Disc Brake 26. Tire
6. Rear Derailleur 13. Battery 20. Adjustable Stem
7. Carrier 14. Chain 21. Front Light
10
11
12
13
18
17
16
15
14
20
24
22
25
23
21
26
6
4
5
3
7
8
9
19
1
2
General
02
1. Left Grip 5. Diplay
2. Left Brake Lever 6. Shifter
3. Throttle 7. Right Brake Lever
4. Display Controller 8. Right Grip
1 2 3 4
5
6 7 8
Component Metro 750
Motor 48V, 750W, Bafang Rear Geared Hub Motor
Battery 48V, 20Ah, 960Wh Li-ncm
Display
Throttle Thumb Paddle Throttle
Front Fork Front Suspension with Lockout
Crankset Prowheel
Brakes Hydraulic Disc Brakes
Derailleur Shimano, 7-speed
Freewheel 7-speed
Tires 26” x 2.4”
Front Light Integrated and controlled from the display
Rear Light Integrated and controlled from the display
Max Loading¹ 275lbs
Max Speed² Cadence sensing PAS up to 25mph, trigger throttle up to 20mph
¹Max load includes the bike
²Can be configured to class 1, 2, or 3 e-bike
1.General Introduction
1.5 Technical Data
General
03
5mm
4mm
1. Open the top cover, align the stem with the head
tube and slide it on. Tighten the screw at the top of
the stem.
2. Align the handlebar to be perpendicular to the
wheel, then insert and tighten the two side-facing
screws as shown below.
5mm
Screw for adjusting the
handlebar position
3. Move the handlebar up or down to adjust to the
desired angle, then tighten the rear-facing screw at
the top of the stem to lock the handlebar in place.
4. Close the cover to complete installation and
adjustment.
2.Installation and Adjustment
2.1 Handlebar and Stem Assembly
Installation & Adjustment
04
2.Installation and Adjustment
2.2 Assembly of the Pedals
The “R” marked pedal is for the right (when facing the forward direction). For attachment to the crank,
tighten clockwise.
The “L” marked pedal is for the left. For attachment, tighten counterclockwise when facing directly.
First screw on the pedals by hand, then tighten with the wrench provided.
RL
L
R
Installation & Adjustment
05
2.Installation and Adjustment
2.3 Seat Position
To enable comfortable, fatigue-free and safe riding, the saddle and handlebar height should be adjusted to the
body size of the rider.
bottom position of the crank cycle. The toes must still be able to touch the ground comfortably.
Optimal
Installation & Adjustment
06
2.Installation and Adjustment
2.4 Saddle Height
The quick-release lever must require noticeable effort to put into fully closed position to prevent any unde-
sired movement while riding.
WARNING
An improperly closed quick release lever can open again or have limited ability to keep the saddle in place.
This may cause the saddle to suddenly drop into the seat tube, potentially leading to serious falls and injury.
MININSERT
There is a minimum insertion line marked on the seat post
(failure to observe the minimum insertion line can result
in serious injury); please ensure the seat post is always
inserted into the seat tube beyond this line (the line must be
inside the seat tube).
Loosen the quick release lever at the top of the seat tube,
determine the appropriate saddle height and tighten the
clamp.
The clamping force can be adjusted by adjusting the bolt on
the quick release lever.
The quick release lever must be closed with considerable
counter pressure.
2.Installation and Adjustment
2.5 Saddle Adjustment
back direction.
Loosen the bolt at the bottom (4).
Adjust the saddle tilt by pressing down on the front or rear
of the saddle
torso length and desired riding position.
Tighten the bolt (4) to secure the saddle.
Installation & Adjustment
07
3.Battery and Charger
3.1 Overview
A
B
C
D
E
F
Battery
Charging Socket
Battery Handlebar
Capacity Level Light
Power Button
USB Port (on some batteries)
WARNING
Please ensure that the battery is locked in place before use
A AC Plug¹
B Charger
C Charging Indicator
D Battery Plug
¹Type will vary
C
B
D
A
3.2 General Remarks
Stop charging the battery immediately if you notice anything unusual, such as smoke or a strange smell;
take out the battery and store it outside of the house, then take the battery to an authorized dealer or experi-
enced technician for service or replacement.
-
3.3 Installing and Removing the Battery
The battery has a lever (1) and is secured with a lock (2)
Unlock the battery and pull it out
Insert the battery into the frame until it stops
Remove the key from the lock (2). Ensure that the battery is well secured
2
1
2
1
3.4 Charging
-
ciently and can be harmful to the life of the battery
During charging, the charger’s LED light will be continuously red
Charging is completed when the charger’s LED turns green
Battery & Charger
08
Table des matières
