STEP - Required extra seings within Philips Hue Bridge
Okay now there is some housekeeping to do...
.
.
.
Renaming your Philips Hue Bridge
1. Go to Seings
2. Click Hue Bridges
3. Click the i and rename your Philips Hue Hub to the location or an easy to recognise name such
as Mobbs home
Seing up “Out of home control” for your Philips Hue Bridge
1. Go to Seings
2. Make sure your Hue Bridge is showing green Connected > Click on Out of home control
3. Click Log in
Create an account
1. Verify your email address by going to your emails, opening the email from Philips Hue
2. Click Verify my account
3. Click I have verified my email
4. Input your details > Click Continue
5. Push the buon on the Philips Hue Hub you want to connect to
6. Click Continue
7. Click Yes
Seing up automatic soware updates for your Philips Hue Bridge
1. Click Seings
2. Check for any updates by clicking Soware update under Seings
3. If updates are available, install them immediately. If no updates are available, setup automatic
updates by clicking Automatic update
4. Select a suitable time (such as am when the Hue Hub will not be required)
5. Once complete > Click Close
Seing up the home location for your Philips Hue Bridge
1. Click Seings
2. Click Advanced
3. Click Home location
4. Click Got it (a pop-up askes, you to allow Hue to access your location > Always)
5. Click Save when you have found the right location (Note: it will not allow adjustment of your
location as it is based on your devices location)
.
.
Charlie
Check
Quick watch:
bit.ly/stitchystep3
The next steps are based around the successful connection of Philips Hue to work with your
chosen home automation device.If you have chosen not to use a Philips Hue we have directions on
the direct connection usuing an Amazon Alexa Echo Plus/Show .
!
