M Climate Maya Manuel utilisateur
User Manual
1
Safety recommendations when using the multifunctional robot vacuum cleaner Maya.
Safety measures
Caution
Attention
Any attempt to repair the appliance by a
person, not authorized by the manufacturer,
may result in adverse effects such as fire,
electric shock, or injury to the user.
Any touch of the electrical wiring of the device
with wet hands can cause electric shock.
If a garment or any part of the user's body
(head, toe, etc.) falls between the brushes of
the device or between its wheels, it may lead to
possible injuries.
Using a power cord other than the original one
increases the risk of damage to the device,
electric shock or fire.
Bending the electrical wiring of the device, as
well as placing weight on it, could result in
damage, fire or electric shock.
Don’t forget to disconnect the power cord
when planning not to use the device for a long
time. This will protect the battery against
possible damage.
Use the appliance with care in the presence of
children to avoid their possible fright.
Don’t attempt to clean wet surfaces with the
appliance. This would increase the possibility
of its damage.
Using the appliance to clean the outside area
would cause damage to its operation.
Do not leave movable threads, cables, or other
objects over 150 mm in length on the floor and
those that are likely to get stuck in the brushes
of the device.
Ensure that the power cord is secure, avoiding
the risk of electric shock, smoking, short circuit
or fire.
Do not leave easily destroyable objects (lights,
textiles, bottles, etc.) near the device while it is
cleaning so they are not damaged.
Standing or sitting on the device would
damage its integrity as well as jeopardizing
your safety.
Do not use the appliance on small tables,
chairs or other items, otherwise you risk its
damage.
Using the device for commercial rather than
domestic purposes would result in its faster
depreciation.
Do not provide control of the appliance in the
hands of people with disabilities, children or
those not familiar with these safety
recommendations.
2
Content
Applicability 3
Components 3
How it works 3
Display 4
Top panel 5
Bottom panel 5
Charging 6
Charging station 6
Install charging station 7
Assembly and maintenance 8
Assembly and maintenance of waste container 8
Assembly and maintenance of brushes 9
Battery assembly and maintenance 9
Assembly and maintenance of mop (optional) 9
Remote control 9
Functions available from the remote control 11
Control panel of remote control 11
How to use remote control 11
24-hour programming 12
Error check 12
Technical specifications 15
The appliance is suitable for home use, hotel rooms and small office spaces. It is designed for cleaning short-hair carpets,
wooden flooring, hard flooring and ceramic tiles. The appliance is not suitable for cleaning long carpets and uneven surfaces.
Note: Remove brushes when cleaning carpets.
3
Applicability
The brushes sweep the dust to a dust container, after which the durt is sucked into the dust container. After filtering, the trash
remains in the container and the air is released.
How it works
Components
Multifunctional
Vacuum Robot Maya
Adapter Remote controlCharging station
4x Brushes Water container User manual2x Mops
Active button for 20-minute mode
Turn on the appliance. Press for about 3 seconds to activate Maya, then press again. Now Maya will clean up
within 20 minutes.
If you press any button within the 20 minutes, Maya will be paused.
А) After the 20 minutes, Maya will be paused, then shut down.
B) Press or and Maya will turn on.
Active button for automatic cleaning mode
Turn on the appliance. Press for about 3 seconds to activate Maya, then press again. Now Maya will clean up in
automatic mode.
If you press another button while the appliance is cleaning on automatic mode it will be paused.
A) In automatic mode, Maya will run until the battery is short of power and then will change to auto charging mode to find
the charging station. If, for any reason, Maya fails to reach the charging station, it will automatically shut down.
4
Display
Active buttons
STA light is on, which means the
Wi-Fi network is active and the
device can be controlled by the
network.
Shows the status of the battery.
Problem with Ground Sensor.
Active button for 20-minute mode. After 20 minutes of operation,
Maya will be paused.
Active button for automatic cleaning mode.
Problem with brushes.
Problem with one of the wheels.
AP light is on, which means that
the device's Wi-Fi network is
active and can be found via the
mobile application.
Central wheel problem.
Problem with waste container.
Fan problem.
Use of active buttons
Note:
A) Maya has a scheduled route feature. Upon switching on, Maya activates the scheduled route feature. The trajectory of a
planned path feature resembles an shape. You can use the remote control or a mobile application to change the operating
mode of Maya.
B) If the battery is about to be exhausted, Maya will automatically begin to search for the charging station. Pressing any button
will pause Maya for 1 minute, then it will continue with the search for the charging station. In this situation, pressing any button
for about 3 seconds turns off Maya automatically.
5
Top panel
Waste container panel
Top cover
Display
Side Brushes
Power button
Central wheel
Dust mouth
Wheels’ cover
Bottom
cover
Label
Left wheel
Right wheel
Battery
cover
Ground
sensors
DC plug
Anti-collision sensor
(ultrasound)
Bottom panel
Connect the adapter to the power supply, then connect it to the Maya via the
power input.
High voltage!
Use with dry hands.
6
Manually charging
Charging station
1
The display icon will be flashing while Maya is charging.
2
When fully charged, flashing will stop.
3
After Maya is charged, remove the adapter and turn Maya off.
Wire Inlet
Light indicator Active when the charging station is connected to the electrical network
via power adapter.
4
Power
input
1. Wire inlet 5. Front cover
9. Stand
6. Back cover
8. DC plug
7. Wire assembly
2. Light indicator
3. "+" Electrodes
4. "-" Electrodes
7
Install charging station
"+" and "-" Electrodes Try to keep them clean to avoid interference while Maya is being
charged.
Stand For stationary feeding of the feed station in some of the corners of the
room.
Wire seat
DC plug
Serves to store the surplus DC plug
Front and back cover
Connect the adapter to the charging base.
Note: Make sure there is free access to the charging station - 2.5 meters in front of it and / or 0.5 meters on both sides.
1
Open the stand when you place the charging station in a corner of the room. Close the stand when you place the
charging station tightly against the wall in the room.
2
In case the battery is about to be exhausted, Maya will automatically start looking for the charging station.
When fully charged, the battery’s light indicator will stop flashing.
Note:
-The power pins should be kept clean and uncovered.
-First three times, use Maya to fully discharge the battery for optimal functioning of the appliance.
-Typically, Maya's full charge takes 5-10 hours.
-Maya is recommended to be turned on while charging.
-After being fully charged, Maya will work for 90-150 minutes depending on the flooring and battery capacity.
-In case the access to the charging station is obstructed (2.5 meters ahead of it and / or 0.5 meters on both sides), Maya will not
be able to find it.
8
Assembly and maintenance
Place the waste container as shown in the diagram,
steps 1 to 5.
1
To remove the container follow the steps shown in the diagram
but in reverse order from 5 to 1.
2
Assembly and maintenance of a waste container
Follow these steps:
1 2 3 4 5
9
Assembly and maintenance of brushes
Assembly and maintenance of battery
Assembly and maintenance of mop (optional)
On the brushes there is a hexagon shaped hole that fits perfectly with the one in the booth. Push the brush already in the
cab until you hear the click sound.
1
To remove the brushes, pull them gently from their base in the
direction indicated by the white arrows in the pattern.
2
Remove battery. Use a crosshead screwdriver to
unscrew the screws from the battery cover. Follow the
direction indicated by the white arrows on the
diagram. Open the cover and remove the battery.
1
Insert a battery. Place the battery in the same way as
shown in the diagram, then close the lid and tighten
the screws in the direction indicated by the black arrow
on the diagram.
2
When the battery is properly installed, you will hear a
beep sound indicating that the device is ready for use.
3
Follow these steps:
Follow these steps:
A.Assembly of mop and water fill
Put the
brushes
in the cabins
1.Place the mop
as shown in the
diagram
2.Open the two
rubber plugs 3.Fill with
water
4. Close the rubber
plugs after filling
with water
Screw holes
How to insert
a battery
Table des matières
Autres manuels M Climate Aspirateur
