Lynx ionic-5CX Manuel utilisateur
QUICK START GUIDE
V.18.06
Lynx Pro Audio S.L.
Valencia, Spain - www.lynxproaudio.com - info@lynxproaudio.com
ionic-5CX
Manufacturer
CE CERTIFICACTION, EUROPEAN PRODUCT
ionic-5CX
LYNX Pro Audio S.L.
Calle uno - Pol. Ind. Picassent
E-46220 Picassent (Valencia)
This user guide is property of Lynx Pro Audio S.L. Any reproduction of this manual, by any means is strictly prohibited.
Copyright 2018. All rights reserved.
LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com -info@lynxproaudio.com
ionic-5CX
CONTENTS
1. SAFETY PRECAUTIONS 4
2. INTRODUCTION 5
3. CABINET OVERVIEW 6
4. CABINET CONNECTIONS 7
4.1 NORMATIVE 7
4.2 CONNECTORS 7
4.3 RECOMMANDATIONS 8
5. AMPLIFICATION 8
5.1 USING THE IONIC POWERED SUBWOOFERS 9
-The back panel 9
-Signal and connections 10
-Overview 11
-The confi guration panel 13
-How to select Input: Digital or Analog 14
-Select and run Presets 14
-The Online Control System OCS 15
6. ACCESSORIES 16
7. CERTIFICATIONS AND GUARANTEE 17
LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com -info@lynxproaudio.com
ionic-5CX
- Electrical appliance.
The exclamation mark within a triangle identifi es the presence of electricity. Use the system care-
fully without wet hands or feet. Avoid installing the speaker in wet or excesivelly humid places. Do
not place material that contains liquid on or near the unit. Avoid dripping or splashing water or any
liquid over the unit. Regularly check the condition of the cables and make sure these are not being
walked on or pinched. Connect the speaker to bipolar, earthed mains.The mains plug mustbe con-
nected to the appropriate protection (fuse or breaker). Connection to any other type of mains could
result in an electrical shock and violate local electrical codes. CAUTION: DO NOT CONNECT OR
DISCONNECT THEAC POWER CONNECTORS UNDER LOAD.
- Heavy equipment.
Apply back protection when using the system.Avoid loading and unloading at heights.
- Electrical shock risk.
The diagonal mark within a triangle identifi es the presence of dangerous voltage.
Do not open or handle the interior of the box. These parts are not to be adjusted by the user. For
maintenance and/or repair please go to an authorized service centre.In order to reduce the risk of
electricshock,disconnect fromACbeforepluginorunpluggingAudiosignalcables.ReconnecttoAC
onlyifallsignalconnectionsaremadeandsecured.Nevermanipulatethegroundtypeplugprovided.
TheAC mains plugs should always remain accessible for operation.
Unplug the loudspeaker during storms or when it’s being used for a long time.
- Hearing damage risk.
These systems can reproduce large quantities of sound pressure which can damage hearing. Take
precautions if you are going to be near them for extended amounts of time and do not get too close.
- Hanging – Flying.
Do not hang the cabinets from the handles or from any other part other than the designated hanging
point. When fl ying this system please observe the technical and “Rainbow” software data carefully.
Never exceedthe maximum safeworkingloadsorignoretheinstructionsincludedwithinthismanual.
Use Only fl ying accessories provided by Lynx Pro Audio S.L.
Rigging must be always carried out by professionals.
- Delicate Material.
Please ensure no foreign object or water enters the speaker. Only clean the unit with dry cloths. Do
not use solvents.
-Overheating – Fire risk.
To reduce the risk of the speaker over heating, avoid direct contact with sunlight.Avoid placing the
unit close to heat inducing objects such as radiators. Do not cover the equipment in use and do not
block any ventilation openings. Do not put naked fl ame, such as lighted candles, close or on top
of the unit.
- Electromagnetic and interferente emissions.
Avoid placing objects which through electromagnetic waves can damage the unit, such as mobile
phones, lap tops, magnetic strip cards etc.
This system complies with normatives EN 55103-1 (1)
EN 55103-2 (2)
(1) This device may not cause harmful interferences.
(2) This device may receive interference including interferences that may cause undesired working.
-IMPORTANT NOTE.
This Equipment must be used in accordance with these instructions and by trained professional
personnel only. This equipment should not be used in places with extreme tropical climates. Don’t
expose this apparatus to extreme humidity and or temperature values.
4
LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com -info@lynxproaudio.com
ionic-5CX
2. INTRODUCTION
This manual describes the recommended installation procedure for the ionic-5CX. Please read this manual
carefully.
The compact ionic-5CX is a versatile cabinet, very easy to use and easy to install. It is designed for general
installationswherediscreetcabinetsarerequired.Clubs,theatres,housesofworship,publicbuidings,commercial
complexes, etc. The installation of the ionic-5CX can be done using external amplifi ers or in combination with the
powered subwoofers ionic-12S and 18S.
When using the ionic-5CX powered by the ionic-12S active subwoofers you can use various preset confi gurations
available from the integrated DSP.
Please note that a range of mounting accessories is available.
5
LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com -info@lynxproaudio.com
ionic-5CX
3. CABINET OVERVIEW
Measurements Back panel
Components 1 x 5” coaxial speaker with LF 1.5”
and HF 1” voice coil
Rated power ( AES) 150 W, 300 W program, 600 W peak
Nominal Impedance 16 Ohms
Frequency Range 64 Hz – 20 KHz (-10dB) Connectors 2 x Neutrik Speakon NL4MP / 4 x
Terminal Block 7.62 mm between pins
Frequency Response 90 Hz - 20 KHz (± 3dB) Finish Polyurea coating
Sensitivity 93 dB (1W@1m) Material 10 mm premium birch plywood
Max. SPL 114 dB - 120 dB peak Dimensions 140 x 140 x 220 mm (H x W x D)
Coverage 70º conical dispersion Weight 3Kg (6.6 lbs)
ionic-5CX
6
LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com -info@lynxproaudio.com
ionic-5CX
4. CABINET CONNECTIONS
4.1 Normative
The cabinet meet the following standards:
EN 55103-1:1996: Electromagnetic compatibility. Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use (-1 Emmision).
EN 55103-1:1996: Electromagnetic compatibility. Product family standard for audio, video, audio-visual and
entertainment lighting control apparatus for professional use. (-2 Immunity)
EN 60065:2002:Audio, video and similar electronic apparatus. Safety requirements.
4.2 Connectors
The ionic-5CX have a connection panel at the rear of the cabinet. This consists of 2 internally bridged Neutrik
NL4-MP connectors which apply no process to the signal.
Note: If pins ±2 are not used they will still be internally bridged.
7
To connect the speakon follow the instructions in fi g. 1
Insert the male speakon in its corresponding hole and turn right until it clicks. This fi xes it safely and strongly and
helps stop it being pulled out by mistake. At the other end of the cable connect in the same way to the amplifi er
channel.
Furthermore the cabinets HR-6 and HR-8 can be supplied with 4 terminal blocks(7.62 mm between pins)instead
of the Neutrik NL4-MP.
Connector Connections per box impedance Rated power Program power
NL4MP ±1 2 16 Ohms 150 W AES 300 W AES
LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com -info@lynxproaudio.com
ionic-5CX
4.3 Recommendations
Always ensure cables are in good condition. Know the recommended cable length and thickness according
to the cabinet and quantity you are installing. An incorrect connection can aff ect the functioning of the system
or even damage it. Cable thickness will vary according to cabinet impedance, quantity and distance. This is
especially important when connecting Subwoofers.
As a guide, please see the following table which outlines the thickness depending on the power and length of
cable.
8
5. AMPLIFICATION
The ionic-5CX is very easy to use. The installation can be done using external amplifi ers or in combination with
the powered subwoofers ionic-12S and 18S.
When using the ionic-5CX powered by our ionic active subwoofers you can use various preset confi gurations
available from the integrated DSP.
Bear in mind Ohm ratings on the amplifi ers used to power the cabinets. For example, 2 ohm amplifi er
confi gurations are not recommended due to the excessive power from the amp output.
Never connect more cabinets than recommended in parallel. With parallel connections, the total impedance
can be calculated by dividing the impedance of 1 cabinet by the number connected.
LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com -info@lynxproaudio.com
ionic-5CX
9
5.1 USING THE IONIC POWERED SUBWOOFERS
The ionic-5CX can be powered from the active subwoofers ionic-12S or ionic-18S in diff erent confi guration
systems. You can use 2 cabinets in combination with one subwoofer ionic-12S or use 4 cabinets with one
subwoofer ionic-18S.
USB connection
LCD display &
digital control
Signal Input
Signal Output
Output power
speakon +1/-1 Main input Main link
*Ethernet
OPTIONAL
* Available when the user has requested the cabinets to be supplied with the Ethernet Module kit.
The back panel
In the following drawing you can see the back panel of the subwoofer ionic-12S (very similar to ionic-18S), which
includes the power amplifi cation and the digital signal control board. From this back panel you can also select
various preset confi gurations using the LCD display and digital control buttons.
LYNX Pro Audio S.L. - Valencia, Spain - www.lynxproaudio.com -info@lynxproaudio.com
ionic-5CX
XLR AEREAL CONNECTORS
INPUTS
1.- EARTH
2.- LIVE (+)
3.- LIVE (-)
XLR SOCKET CONNECTORS
SOCKET POWERCON TRUE1
CAUTION: Do not connect
or disconnect the AC Power
connectors under load.
NAC3FX-W
NAC3MX-W
Signal and connectors
10
Table des matières
Autres manuels Lynx Intervenants
Lynx
Lynx CPS Series Manuel utilisateur
Lynx
Lynx Ionic Series Manuel utilisateur
Lynx
Lynx LX-218S Manuel utilisateur
Lynx
Lynx Juno Series Manuel utilisateur
Lynx
Lynx QB SERIES Manuel utilisateur
Lynx
Lynx HR-SERIES Manuel utilisateur
Lynx
Lynx LX-V8 Manuel utilisateur
Lynx
Lynx CPS-210 Manuel utilisateur
Lynx
Lynx pro-audio GR-18S Manuel utilisateur
Lynx
Lynx LX-212S Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur