Lynx 310 Manuel utilisateur
Lynx 310
Hearing Amplifier
User’s Instructions Sheet
Thank you for purchasing this Lynx 310 BTE Hearing Amplifier. You have our commitment to continue pro-
viding you with support for using this Lynx 310 BTE Hearing Amplifier you just bought. We encourage you to
let us know your opinions about using the device and to share your experience with us.
It is important for you to read this user instructions sheet before using this Lynx 310 BTE Hearing Amplifier.
All the instructions in this user’s manual should be followed when operating the device, you should read and
observe the warning statements, and be sure to keep this user instructions sheet for future reference.
As the result of continuous product development, most of the photos, graphic illustrations in this user
instructions sheet may slightly vary from the actual device delivered.
Contact customer support:
For after sales service and technical supports you may want to seek for assistance of the reseller who sold you
this Lynx 310 BTE Hearing Amplifier. The detailed contact of your reseller should be labeled on the receipt for
the purchase of this Lynx 310 BTE Hearing Amplifier.
To adjust yourselves to this Lynx 310 BTE Hearing Amplifier you may want to wear the device and try
listening to the radio or watching television, start conversations with the others; thru practice you will soon
be able to identify sounds and voices surrounding you with this Lynx 310 BTE Hearing Amplifier. When you
first start wearing the device you should concentrate particularly on those sounds and voices you want to hear,
practise with this Lynx 310 BTE Hearing Amplifier to pick them up from one to another. This Lynx 310 BTE
Hearing Amplifier is designed to fit either ear.
1. Turning on/off the device:
The ON/OFF switch is located on the lower-back of
the device casing as illustrated. Slide the switch to the
direction towards the battery door for turning the
device ON, vice-versa for turning the device OFF.
This Lynx 310 BTE Hearing Amplifier should be
turned off when not in use to maximize battery life.
2. Volume control:
The amplified sound volume control of this Lynx 310
BTE Hearing Amplifier is continuously adjustable
located on the upper-back of the device casing. Turn
control knob to the direction towards the battery-door
for adjusting the amplified sound to its high-spec-
trum, vice-versa to its low-spectrum; sound volume
should be regulated to its lowest spectrum prior to
wearing the device.
Caution:
This BTE Hearing Amplifier is a delicate device can be damaged easily, must be handled with care.
3. Adjustable audio wire:
The audio wire is left/right adjustable in 145º to
accommodate difference ear shape of the wearer.
4. Battery installation:
The battery compartment of the device is located on
the back of the device casing with a battery door, to
open the battery door by lifting it with the battery
door handler. To install or replace the 1.5V AG13/
LR-44 Alkaline button cell battery for the Lynx 310
BTE Hearing Amplifier you must ensure the battery
polarity (+) flat-end facing the side of the device
casing that marked with a “circle +”.
[continued on next page]
Page 1 of 2
The battery compartment may be jammed with the
battery when wrongly installed, resulting device
malfunctions. Contact your reseller if similar situation
occurred, do not attempt to repair the device by
yourselves, such move may cause un-repairable
damage to the device.
5. Wearing this Lynx 310 BTE Hearing Amplifier:
The illustrations below showing how the device is
properly worn by the wearer. This Lynx 310 BTE
Hearing Amplifier should be installed with an ear-
tip to the receiver end of the device earpiece before
wearing. To wear the device without ear tip on it may
result weak amplified sound delivered for your
hearing; will cause the unwanted feedback.
In wearing the device, try to insert the ear tip towards
inside your ear canal, and to adjust the earpiece with
for comfort and better fit.
Use and Care:
To upkeep this Lynx 310 BTE Hearing Amplifier, daily
cleaning is of primary importance. You may want to
follow the steps below to maintain your device.
1. With a soft bristled brush, brush gently back and
forth across the receiver end to remove all the wax and
dirt that may have collected inside. This prevents wax
from building up.
2. Make sure the receiver end is cleared of debris &
dirt.
3. Wipe the case with damp cloth only. Do not use
liquid or aerosol cleaners to clean the device.
4. When not using store it safely in the container.
Industry Guidance:
This Lynx 310 BTE Hearing Amplifier is a wearable electronic product of the personal sound amplification
products (PSAPs) intended to amplify environmental sound for the non-hearing impaired consumers, contrary
to compensate for hearing impairment. In accordance with the Guidance for Industry & FDA Staff -
Regulatory Requirements for Hearing Aid Devices and Personal Sound Amplification Products issued on
February 25, 2009, the product is subject to applicable provisions of the Radiation Control for Health and
Safety Act of 1968, under which FDA regulates electronic products that emit sonic vibrations, such as sound
amplification equipment. This BTE Hearing Amplifier conforms to the Code of Federal Regulations 21
CFR1000.15 [TITLE 21 VOLUME 8 REVISED AS OF APRIL 1 2010].
Disclaimer:
This Lynx 310 BTE Hearing Amplifier is a device of the personal sound amplification products (PSAPs)
defined by U.S. Food & Drug Administration, intended to amplify environmental sound for the non-hearing
impaired consumers. Personal sound amplification products (PSAPs) are not intended to compensate for
hearing impairment, diagnose, treat, cure or mitigate disease and do not alter the structure or function of the
body. If you or your family member have experienced any hearing problem, you should consult a licensed
audiologist for a full audiometric evaluation, or an otolaryngologist for medical, surgical diagnosis, and
treatment of all ear and hearing disorders and diseases. Use of this Lynx 310 BTE Hearing Amplifier not for
its intended use is beyond the responsibility of the manufacturer and/or the reseller of this device.
Initial Importer and master distributor:
Richmix Distributors, LLC
1313 E Maple Street, Ste 210#522
Bellingham WA 98225
U.S.A.
Table des matières
Autres manuels Lynx Prothèse auditive
Manuels Prothèse auditive populaires d'autres marques
Advanced Bionics
Advanced Bionics Slim HP Standard Manuel utilisateur
Widex
Widex DREAM440 THE DREAM SERIES Manuel utilisateur
Phonak
Phonak myPilot Manuel utilisateur
NIKEN
NIKEN NK-401 Manuel utilisateur
ON Semiconductor
ON Semiconductor Ezairo 7111 Pre Suite Manuel utilisateur
Sonetik
Sonetik GOHEAR Manuel utilisateur