Multi-room Music System
Remote Control Pad
HS-30R
Thank you for choosing our multi-room
music system. For better use of the equipment,
please read the manual book carefully before
operation.
I. Features
Convenient wired remote control pad for
family music control center.
Operation mode of light touch type key,
luxurious appearance design and striking LCD
display.
Provided with basic operation functions of the
console, including sound source selection,
volume\tone control, MP3 song inquiry, tuner
radio memory No. inquiry etc.
One wired remote control pad can control one
zone correspondingly through address setting.
Available to receive the control operation of
infrared remote control pad.
Controllable distance of 300 meters.
II. Turn on and Turnoff of Remote
Control Pad
1. Turn on of Remote Control Pad
This remote control pad
can be turned on by turning
on the console power supply
and the zone which is on
the console and corresponds
to this remote control pad.
After turn on , the main
interface appears on the screen.
This remote control pad can be turned on by
pressing any of the key provided that the
console has been turned on. After turn on , the
status prior to the remote control pad’s being
turned off appeared on the screen.
2. Turnoff of Remote Control Pad
This remote control pad can be turned off by
turning off the consol power supply.
This remote control pad can be turned off by
long pressing the “ ” key (as shown in Fig.
2-1) of this remote control pad for five seconds.
III. Instructions of Status Display of
Remote Control Pad
Main interface display (as shown in Fig. 3-1):
This interface displays the status of 6 sound
sources and their volume of this zone. The
sound source displayed in a highlight manner
is the one that is being played now.
Volume and tone control interface (as shown
in Fig. 3-2): The volume and tone can be
controlled through this interface.
Status operation interface in the mode of tuner
(as shown in Fig. 3-3): Operations including
wave band switching of tuner mode and the
transfer of radios saved in the console can be
carried out through this interface.
Status operation interface in the mode of MP3
(as shown in Fig.3-4): Operation of functions
such as song selection, play etc. in the mode
of MP3 can be carried out through this
interface.
IV. Operating Instructions
1. Selection of Sound Source
Please refer to the main interface and press the
sound source's corresponding operating key on
the interface. The highlight display of this
sound source indicates that it has been selected.
When the “TNR” or “MP3” sound source key
selected is pressed, The play status operating
interface of tuner or MP3 appears on the screen
(as shown in Figs. 4-1 and 4-2).
2. Volume Control and Tone Control
Press the volume and tone control keys as
shown in Fig. 4-3 to enter the volume and tone
control interface. (Note: On any interfaces
other than the volume and tone control
interface, the volume and tone control interface
can be entered just by pressing the key
corresponding to the volume indication bar
“ ”.)
The operation of volume and tone control keys
is as shown in the figure as follows:
