www.luznegra.net
Pair with RF receiver
SEQUENCERS FOR LEDS
CCT DIMMER CONTROLLER FOR 6 ZONES
BARCELONA
C/ Carles Buhigues, 13
08420 Canovelles
Info@luznegra.net
Tel: +34 938 402 598
MADRID
C/ Adaptación, 27
28906 Getafe
centro@luznegra.net
Tel: +34 916 416 081
PARIS
113 Avenue Jore
77450 Esbly
france@luznegra.net
Tel: +33 (0) 160 426 585
Step 1: do wiring of the RF receiver according to wiring diagram(please refer to the instruction of RF receiver that you would like
to pair with.
Step 3: choose and click a zone number (e.g. zone 4).
Step 4: click any of the four buttons , led lights connected with the RF receiver flicker once means the receiver is
paired with zone 4 successfully.
After pairing, choose and click one or multiple zone numbers, then press and hold any of the four buttons to operate.
Note: one receiver can be paired with max 8 remote controls.
Step 2: click the “Learning Key” button on RF receiver to set it into pairing status
If you use multiple receivers, you have two options:
Option 1: have all the receivers in the same zone, like zone 1.
Option 2: have each receiver in a different zone, like zone 1, 2, 3 or 4.
Zone 1
Zone 1 Zone 2 Zone 3
Remote control
Remote control
RF led receiver
Learning Key
RF led receiver
Learning Key
RF led receiver
Learning Key
RF led receiver
Learning Key
RF led receiver
Learning Key
RF led receiver
Learning Key
