Lunix LX3 Manuel utilisateur
Cordless
HAND MASSAGER
This innovative hand mas-
sager sqeezes away the
stress and strain of daily life,
to give you a robust massge
experience unlike anything
you’ve ever tried before!
Your satisfaction is our top
priority and we are here to
help with any issues!
We’ve started as a small
American family business
based in California with the
CORE VALUE of enhancing
each of our customer’s life
experience. Our team works
hard everyday to make the
most thoughtful and the
highest quality products for
those who matter the most:
OUR FAMILY & FRIENDS!
Hand Massager
LX3
Congratulations on your purchase of the Lunix
LX3 Hand Compression Massger.
Please read the manual carefully
before using the Lunix Hand Mssager
Introduction
What’s In The Box?
Control Pad
Benefits
Before Using Your Hand Massager
First Step: Charging
Operations
How to Use the Finger Massager
Care, Maintenance & Cleaning Instructions
Precautions
Specification LX3 Hand Massager
Troubleshooting
4
4
5
6
7
7
8
10
10
11
11
12
..................................................................
.........................................................................
...........................
..........
................................................................
..........................
........................................................
......................................................
...................................................................
..........................
.......................................................
.................................................................
Table of
Contents
!
What’s In The Box?
4
Introduction
The heating LX3 hand palm and fingers massager with
air compression has been conceived to help people
with sore hands.
Lunix's Team of massage therapists designed the most
efficient Hand Massager if you want to relax your palm,
fingers and wrists after a long day of work while
relieving muscles pain, arthritis, numbness and
improving blood circulation.
The LX3 hand massager is designed as a personal care
product. It's not for diagnosis/treatment
of any health disorder.
1x Hand Massager
1x Finger Massager
1x USB Charging Cable
1x Travel Bag
1x User Manual
.....................
........................
................................................
.............
...............
DESIGNED IN USA
15’ Session
6 Programs2 Vibration
Modes
Shut Off
Protection
Heat 6 Levels
Control Pad
5
Intensity level
indicator
Intensity
button
Vibration
button
Program mode
indicator
Program
button
Heat
button
Power Button
6
With its ergonomic design,
the Lunix LX3 Hand Massager
is designed to give you the
most comfortable massage.
Based on the principles of
human engineering, a unique
design and the distribution
of acupuncture points, the
massager meets the demands
of your hand according to its
structure. It will be like having
a professional masseur-
physiotherapist at home.
Sit back and enjoy a good
hand massage after a long day
of work or before going to bed.
Use the LX3 Hand Massager
one or two sessions every day
from 10 to 15 minutes for at
least 7 days in a row in order to
feel the benefits of the
massage.
Benefits
After unpacking the hand massager, please check the integrity
of the device and accessorises and look for any damages.
Before first use, charge the hand massager until the red light on
the display disappears.
Place the device on a flat, level surface.
Insert one hand into the cloth-lined chamber.
Press the Power Button then the Program Button in order to
start the massage.
NOTE: Please be sure to remove all sharp jewelry.
You should see a red light
flashing while charging. After
the battery is fully charged,
the red light should disappear.
In order to charge the hand
massager, just connect the
usb cable between the hand
massager port and any usb
plug (laptop, wall plug, etc.)
CHARGING TIME
5V / 1A: Around 7h
5V / 2A: Around 4h
WORKING TIME
Normal Use: Around 3h
With Heat & Vibration: Around 2h
IMPORTANT:
Please fully charge the hand massager
before the first use.
Please keep in mind that you can not use
the hand massager while plugged-in and
charging due to safety reasons. If the
red light is not flashing while charging,
please report to the troubleshooting
page 12 of this manual.
Before Using your Hand
Massager
7
FIRST STEP: CHARGING
8
POWER
BUTTON
INTENSITY
BUTTON
Place your hand with your palm facing down into the hand
massager before turning the device on. You will notice that
your palm should fit perfectly inside. If you don't feel comfortable,
you may adjust your hand until you find the perfect spot. The front
opening provides a better comfort and a maximum ventilation.
Operations PLEASE WASH YOUR HANDS
EACH TIME BEFORE USING
THE HAND MASSAGER
Power on: press the button for
2 seconds, the hand massager
will switch on, then press the
program button, the hand
massager will start to work.
Power off: press the button for
2 seconds in order to shut
down the device. The airbags
will progressively deflate.
The default massage run time
is 15 minutes meaning the
power will be turned off
automatically after 15 minutes.
You can start it again if you
want to go for a second
session.
The default intensity is l3 out
of 6 different intensity levels
from the weakest l1 to the
strongest l6. You can increase
or decrease the intensity level
by pressing the button.
We strongly recommend for
those who have very sensitive
hands to use the lowest
intensity l1 as a higher intensity
may be uncomfortable.
Wait few days in order to
relieve pain and to feel the
benefits of the massage.
9
PROGRAM
MODE
HEAT
BUTTON
Press the button to turn ON/OFF
the temperature. When the option
HEAT is ON, the red light above
the button will turn on.
Please keep in mind that the heat
function reaches the optimal
temperature after 10 min. of use.
The heat function provides a
gentle warmth, around 104°F
/40°C - enough to relax & enhance
the benefits of the massage.
If you want to feel more heat, we
recommend you to wear a pair of
gloves. This will help your blood
circulation.
The default program mode is P1
with a total of 6 program modes
available. You can choose your
favorite program mode from P1,
P2, P3, P4, P5 and P6.
Find below the detailed programs
so you can adjust your massage
mode accordingly.
Each program massages & releases
pressure on different parts of the
hand, palm & fingers depending
on your hand shape. That means
each person will feel a different
and unique massage. You can
select your favorite program
mode by pressing the button.
VIBRATION
BUTTON
Press the button to activate
the vibration mode. When
the option is ON, the red light
above the button will turn on.
The LX3 hand massager
provides 2 different vibration
modes: a pulse mode and a
continuous mode. Press the
button several times to
switch between the modes.
Combination between
Fingers, Palm and
Wrist Massage
Combination between
Fingers, Palm and
Wrist Massage
1st cycle Palm Massage
2nd cycle: Palm and
Wrist Massage
Wrist massage
1st cycle Palm Massage
2nd cycle Wrist Massage
Palm Massage
P1
P2
P3
P4
P5
P6
This Finger Massager is an
easy and relaxing way to
soothe your tired fingers
after a long day. Just put
your finger in the middle of
the roller and scroll back and
forth to enjoy a wonderfully
comfortable massage.
10
Store the Hand Compression
Massager in a cool and dry place
when not in use.
Do not place the unit into any
type of liquid.
Keep away from all solvents and
harsh detergents.
After use, wipe with a soft, damp
cloth using non abrasive cleaners.
Care, Maintanance &
Cleaning Instructions
How to Use
THE FINGER MASSAGER
Autres manuels pour LX3
1
Table des matières
Autres manuels Lunix masseur
