Lumi miniPRO Manuel utilisateur
USER MANUAL
We always end up right
where we are supposed
to be, right when we are
meant to be there.
Sometimes we just need
a little time to recover.
#lumitherapy
TRUST THE PROCESS
●Reduce muscle soreness and speed up recovery; prevent injury; improve muscle exibility and
performance.
●Recover from injury: decrease pain and inammation; break down scar tissue; loosen sti joints.
●Find pain relief: loosen knots, trigger points, and tightness in your muscles and fascia; boost
circulation; manage chronic pain caused by tendinitis, bursitis, carpal tunnel, and more.
●Boost immune system: improve sleep; reduce stress; increase serotonin and decrease cortisol.
The LUMI miniPRO is highly portable and the high capacity lithium-ion battery provides an average
of 3-4 hours of use-time per charge at high speed & 8-16 hours of use-time at low speed. 4 massage
speeds allow you to choose the right intensity for all areas of the body.
RELAX & RESTORE ON THE GO
SPEED UP YOUR RECOVERY OR PRE-EXERCISE TO ENHANCE YOUR PERFORMANCE
Great for oce workers suering from tech-neck and everyday people looking for a quick at-home
massage.
Percussion therapy uses targeted pulses of concentrated pressure into your muscle tissue. Therapy can
best be compared to 'soft-tissue massage techniques' used by massage therapists which are consistent,
rapid-thumping movements used to stimulate muscles.
Percussion therapy accelerates and enhances the repair of muscle bre by providing rapid bursts of
pressure in concentrated, short-duration pulses deep into the tissues of the body. This enhances the ow
of blood to dierent critical areas, allowing for pain relief and subsequently improving function and range
of motion.
It also provides a gentle stretch that in turn enhances exibility, performance, and physical response.
HOME OR STUDIO
2
CUSTOMER SUPPORT 24/7
If you have any questions about setting up or using your Lumi product, please visit our website for
further information, faqs, troubleshooting and customer support.
●1 x LUMI miniPRO Vibrating Massage Gun
●1 x USB-C Charging Cable
●4 x Interchangeable Massage Attachments
●1 x Portable Bullet Storage Case
UNPACKING YOUR LUMI miniPRO
1. Read carefully through this user manual before using the miniPRO.
2. Go to our website to register and activate your Lumi warranty.
3. Complete the steps in the QUICK START GUIDE to assemble and charge your LUMI miniPRO.
TAKE A MOMENT TO FIND OUT WHAT’S INCLUDED
Follow this QR Code for our
product guides and videos
YOUR JOURNEY BEGINS!
4
GET TO KNOW YOUR MINIPRO
Massage Attachment
(1 of 4)
Battery/Handle
USB-C Charging Port
Non-Slip
Wrist Strap
Status Indicator LEDs
The 4 LEDs indicate the
vibration speed selected (1-4)
and the current battery level.
Power/Speed Button
Press and hold the button for 2
seconds to power ON the unit.
Once power is on, tap the button to
toggle through the 4 vibration speed
levels. Press and hold the button for 2
seconds to power OFF the unit.
5
1. Make sure the LUMI miniPRO is fully charged and powered OFF.
2. Select the desired massage attachment.
3. Insert the stem of the massage attachment into the nozzle of the unit.
NOTE: Make sure the red line on the attachment is lined up with the corresponding red line on
the nozzle (see illustration).
4. Press the massage attachment in rmly to secure it.
5. See VIBRATION SPEED OPTIONS on the next page.
6
FULLY CHARGE THE BATTERY
1
1. Ensure the LUMI miniPRO is OFF before charging.
2. Connect the USB-C charging cable to the charging port on top of the unit.
3. Plug the USB-C charging cable into a USB power adapter, such as a 5V 1A or 5V 2A phone charger.
4. Charge the battery fully (for up to 3 hours) before using your miniPRO for the rst time.
5. The Status Indicator LEDs will ash in turn during charging. The LEDs will stop ashing and all 4 will
remain lit when the miniPRO is fully charged.
Please read the operating instructions before using the LUMI miniPRO.
INSERT A MASSAGE ATTACHMENT
2
QUICK START GUIDE
4
CHARGING
USING YOUR LUMI miniPRO
1. Press and hold the Power/Speed button on the top of the miniPRO for 2 seconds to power ON
the unit. The Status Indicator LEDs will show the current battery level.
2. Tap (short-press) the Power/Speed button to set the vibration speed to level 1. The Status Indicator
LEDs will show the speed level selected.
a. Tap the button a second time for speed level 2. Tap a third time for level 3. Tap a fourth time
for level 4.
b. Press and hold the Power/Speed button for 2 seconds to power OFF.
3. At the desired speed, oat the head of the massage attachment along a muscle group. Apply
pressure as needed.
4. Always power o the unit after each use.
OPERATING INSTRUCTIONS
1. Ensure the LUMI miniPRO is OFF before charging.
2. Connect the USB-C charging cable to the charging port on top of the unit and then plug the USB-
C charging cable into a USB power adapter, such as a 5V 1A or 5V 2A phone charger.
3. Charge the battery fully (for up to 3 hours) before using your miniPRO for the rst time.
4. The Status Indicator LEDs will ash in turn during charging. The LEDs will stop ashing and all 4
will remain lit when the miniPRO is fully charged.
5. The four Status Indicator LEDs indicate the current battery level:
6. For best results, charge the battery before it reaches 25%.
7. When the battery is very low, the unit will switch o and enter battery protection mode. If this
occurs, power o the unit and fully charge it before using it again.
8. Average run-time is 3-4 hours per charge at high speed and 5-6 hours at low speed.
1 LED lit = <25%
2 LEDs lit = 25-50%
3 LEDs lit = 50-75%
4 LEDs lit = 75-100%
7
REMOVING AND REPLACING A MASSAGE ATTACHMENT
1. Press and hold the Power/Speed button for 2 seconds to power OFF.
2. Grab the inserted attachment and rmly pull out to remove it.
3. Insert the stem of a new massage attachment into the nozzle of the unit.
NOTE: Make sure the red line on the attachment is lined up with the corresponding red line on
the nozzle (see illustration).
4. Press the massage attachment in rmly to secure it.
4
8
TIPS FOR USING YOUR miniPRO
●Move the miniPRO over the desired muscle groups, about 60 seconds per region.
●Apply pressure as needed.
●Use the miniPRO for 15-20 minute sessions, up to 3 times per day.
●Avoid keeping the massage head in one area for more than 3 minutes.
●Prolonged application can traumatize tissues.
Keep this manual for reference.
Table des matières
Autres manuels Lumi masseur
