Lumatek Pro DE Reflector Fiche technique
Assembly Instructions & Parts List
BEFORE ASSEMBLY PLEASE REMOVE ALL PROTECTIVE FILM FROM LEAVES
1
Remove the top spine cover and place the spine on a
level surface, with the bulb holders facing upwards.
mount holes
3
2
Using 12 of the shorter bolts, nuts and washers,
assemble the 4 side panels together, ensuring that the 2
panels with cutouts are opposite each other.
Place the part built shade onto the spine lining up the
mounting holes. The bulb holders should be coming
through the cutouts in the shade.
feed bolts
through here
45
from shade from ballast
live
earth
neutral
6
Next, line up the space bar with the mounting holes
of the spine and shade, and then do the same with the
top diffuser plate. Pass one of the long bolts through
the top plate, spacer bar, shade and then spine (in that
order). Secure the bolt from inside the spine with a
nut and washer. Do this with all 4 mounting points on
the spine.
Loosen the gland lock nut and feed your ballasts cable
through the gland.
Next, wire your ballast into your shade ensuring that
both lives, both neutrals, and both earths are securely
connected into the correct place on the connector
block. With no stripped cable showing once the wires
are secured.
Live is marked L
Neutral is marked N
Earth is symbolised with
If unsure, please get a qualied electrician to complete
this stage of the assembly process.
open close
7
Bolt the spine cover onto the spine housing with 6
small bolts and washers, and tighten with the cable
gland.
To install the bulb, simply slide the bulb holders to
the outside, insert the bulb, and then close the bulb
holders. Please ensure that the bulb is securely located
before moving the shade.
ENGINEERED BY QWOD
www.Lumatek.co.uk
Spine Assembly x1
Top Diffuser Plate
Side Panels x4 (2 Feature Cutout)
Fixings Bag
Space Bar x2
A
B
C
D
E
Pro DE Reflector
ENGINEERED BY QWOD
AB
C
D
E
Pro DE Reflector
ENGINEERED BY QWOD
LUMATEK HID SERIES REFLECTOR
Thank you for purchasing a new and exciting product from Lumatek. You are now in
possession of one of the best horticultural reectors available. All of our reectors
undergo strict quality control at all stages of production to ensure that you will receive
a product that performs at the highest levels of expectation. To ensure safe and effective
use please read the complete assembly instructions with great care before attempting to
either assemble or connect to your lighting system.
Safety
• Please be aware that whilst undergoing strict quality control all Lumatek reectors are
made from or contain sheet metal components and as such may contain sharp edges.
We recommend that protective gloves are worn whilst assembling and handling all of
our reectors.
• Lumatek reectors should only be used with HID Lamps and suitable power packs up
to 1000w. Certain reectors can be used with CFL lamps, if unsure please consult your
local supplier.
• When connecting to the rest of your lighting system please ensure that it is isolated
from the power supply.
• Please ensure that there is adequate ventilation in the immediate area surrounding the
reector, under no conditions should you cover the reector.
• There are no user serviceable parts inside the reector, if a problem occurs please
return the reector to the supplier that you purchased it from. Any tampering will
invalidate the reectors guarantee.
• During use the lamp and reector will reach very high temperatures and under no
circumstances should they be touched. Please leave the reector to cool for 30
minutes and isolate from the power supply before handling the shade or bulb.
• Please keep the reector away from Children, pets and water.
• Lumatek reectors are only suitable for indoor use.
Installation
• Before assembly please remove all packaging and protective lms.
• Please ensure power supply to the lighting system is isolated before connecting the
reector.
• Ensure the lamp is securely in position before system turn on, we recommend the use
of protective gloves for this operation. Ensure all marks/ngerprints are removed from
the bulb before turn on.
www.Lumatek.co.uk
Autres manuels Lumatek Équipement d'éclairage
Lumatek
Lumatek LUMLED012 Manuel utilisateur
Lumatek
Lumatek ZEUS 600W 2.6 Manuel utilisateur
Lumatek
Lumatek LUMBC004 Manuel utilisateur
Lumatek
Lumatek ATS300W Manuel utilisateur
Lumatek
Lumatek CONTROL PANEL PLUS 2.0 Manuel utilisateur
Lumatek
Lumatek Pro 600 EU/UK Manuel utilisateur
Lumatek
Lumatek Zeus 1000W Pro Manuel utilisateur
Lumatek
Lumatek ZEUS 600W PRO 2.9 Manuel utilisateur
Lumatek
Lumatek ZEUS 465W PRO 2.9 Manuel utilisateur
Lumatek
Lumatek VF650W Manuel utilisateur
Manuels Équipement d'éclairage populaires d'autres marques
Qazqa
Qazqa Suplux SL 3 Black 103062 Manuel utilisateur
Commercial Electric
Commercial Electric 54568141 Manuel utilisateur
CREE LIGHTING
CREE LIGHTING 304 Series Manuel utilisateur
Goobay
Goobay 49867 Manuel utilisateur
ECOMAN ITALIA
ECOMAN ITALIA LED T8 Manuel utilisateur
Alkalite
Alkalite Krypton KT-81 Manuel utilisateur
