Lumagen Radiance 2021 Manuel utilisateur

Radiance 2021TM and

Radiance 2041TM

Video Processor

Owner’s Manual

LEGAL NOTICES:

TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT SHALL LUMAGEN, ITS SUPPLIERS, OR

ITS DEALERS, BE HELD LIABLE FOR INJURY TO PERSONS OR PROPERTY, ANY LOST REVENUE,

LOST PROFIT, SPECIAL, INCIDENTAL, INDIRECT, CONSEQUENCIAL, OR PUNITIVE DAMAGES,

IMPAIRMENT OF OR DAMAGE TO OTHER GOODS, HOWEVER CAUSED REGARDLESS OF THE

THEORY OF LIABILITY, RESULTING FROM THE USE OF, OR INABILITY TO USE, THIS PRODUCT,

EVEN IF LUMAGEN, ITS SUPPLIERS, OR ITS DEALERS, HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

LUMAGEN SHALL NOT BE LIABLE FOR OMISSIONS OR ERRORS IN ITS DOCUMENTATION OR

SOFTWARE. LUMAGEN RESERVES THE RIGHT TO MAKE CHANGES TO ITS PRODUCTS AND

DOCUMENTATION WITHOUT NOTICE.

DarbeeVision Inc. - End User License Agreement (E.U.L.A) for DARBEE Visual Presence™

Technology in Lumagen Radiance Products: This product provides the ability to turn off

DARBEE Visual Presence (DVP™) processing, because the DVP technology processing feature in

this product is not intended for commercial broadcast or theatrical presentation applications.

By using this product, you accept that the DVP technology ingredient is intended for personal

or small network use and should be switched off if this video processor system is used to

process video for commercial broadcast or commercial theatrical viewing applications. You

may not record the DVP processed output of this video processor system. You may use DVP in

this product to process video for up to six end user displays, within any video system

application, provided the DVP processed output video of this system is not being sold to an end

viewer or user. An additional commercial license is available from DarbeeVision, Inc. for larger

video network, distribution, commercial applications. You may not reverse engineer or

otherwise deconstruct the DVP algorithm, which is the sole intellectual property of

DarbeeVision, Inc., and protected by patents and trade secrets. This E.U.L.A. is not intended to

limit the use of this product or its features, when the video processor is used with DVP off.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to

Part 15 of the FCC rules, Canadian ICES-003, and CISPR 22. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Unauthorized modifications to this equipment may void Lumagen’s limited warranty and the user’s authority

to operate this equipment.

Lumagen is a registered trademark of Lumagen, Inc. Radiance, Vision, and other Lumagen product names,

are trademarks of Lumagen, Inc. Darbee™ and DarbeeVision™ are trademarks of DarbeeVision Inc. Other

trademarks are the property of their respective owners.

WARNINGS:

•Do not defeat the safety features of the power supply or power cord, such as, but not

limited to, removing the ground pin connection.

•Do not open, insert objects into, or spill liquid into, this equipment.

•Do not block the cooling vents, and make sure there is adequate cooling around unit.

•Do not program an output resolution that exceeds the maximum specified refresh rate

of the attached television, or projector.

•Improperly set gray-bar intensity may accelerate screen burn-in. Consult a home-

theater specialist for help setting gray-bar intensity.

Table of Contents

Contents

SECTION 1 – INTRODUCTION.................................................................................................................................. 1

Document Conventions and Menu Navigation.......................................................................................................... 2

Unpacking................................................................................................................................................................. 2

Verify that your box contains the following items..................................................................................................... 2

Remote Control Battery Installation......................................................................................................................... 2

Installation Guidelines.............................................................................................................................................. 2

SECTION 2 – OVERVIEW........................................................................................................................................... 3

FRONT PANEL ................................................................................................................................................................ 3

REAR PANEL .................................................................................................................................................................. 3

HDMI CONNECTIONS..................................................................................................................................................... 3

AUDIO OUTPUT CONNECTION......................................................................................................................................... 3

MISCELLANEOUS CONNECTIONS..................................................................................................................................... 3

Remote Control......................................................................................................................................................... 4

Block Diagram.......................................................................................................................................................... 5

Configuration Memories........................................................................................................................................... 6

SECTION 3 – QUICK START GUIDE........................................................................................................................ 7

INSTALLATION INSTRUCTIONS ........................................................................................................................................ 7

System Configuration Examples................................................................................................................................ 8

Source Device Connection Examples........................................................................................................................ 9

SECTION 4 – BASIC COMMANDS.......................................................................................................................... 10

Power...................................................................................................................................................................... 10

Input Selection ........................................................................................................................................................ 10

Configuration Memory Selection............................................................................................................................ 10

Input Aspect Ratio Selection................................................................................................................................... 10

Image Zoom............................................................................................................................................................ 10

Status Screen........................................................................................................................................................... 11

On-Screen Help....................................................................................................................................................... 11

Quick Keys.............................................................................................................................................................. 11

SECTION 5 – VIDEO CONFIGURATION............................................................................................................... 12

VIDEO OUTPUT SETUP MENU ....................................................................................................................................... 12

CUSTOM MODES MENU................................................................................................................................................ 12

Output Mode – Global Presets................................................................................................................................ 13

Exact Output Timing............................................................................................................................................... 13

Rate Match.............................................................................................................................................................. 13

CMS MENU ................................................................................................................................................................. 13

Gamma Factor........................................................................................................................................................ 13

Color Gamut........................................................................................................................................................... 13

Grayscale and Gamma............................................................................................................................................ 13

Color Decoder ........................................................................................................................................................ 13

Black Level.............................................................................................................................................................. 13

White Level ............................................................................................................................................................. 14

STYLES MENU.............................................................................................................................................................. 14

Output HDMI Format............................................................................................................................................. 14

Color Format.......................................................................................................................................................... 14

Dither...................................................................................................................................................................... 14

Mask........................................................................................................................................................................ 14

Shrink...................................................................................................................................................................... 14

Screen Aspect Ratio ................................................................................................................................................ 14

Graybar Intensity.................................................................................................................................................... 15

3D Glasses Adjust................................................................................................................................................... 15

MISC.OUTPUT SETTINGS.............................................................................................................................................. 15

3D Output EDID Configuration.............................................................................................................................. 15

Sync Polarity........................................................................................................................................................... 15

Copy Output Settings .............................................................................................................................................. 15

Table of Contents

HDMI Input Setup................................................................................................................................................... 15

HDMI Physical Input.............................................................................................................................................. 15

HDMI Video Type................................................................................................................................................... 16

HDMI Level ............................................................................................................................................................ 16

HDMI input EDID Display Information................................................................................................................. 16

HDMI input hotplug mode...................................................................................................................................... 16

HDMI Auto Aspect.................................................................................................................................................. 16

INPUT PICTURE CONTROLS ........................................................................................................................................... 17

Black and White Levels........................................................................................................................................... 17

Color Format.......................................................................................................................................................... 17

Color and Hue ........................................................................................................................................................ 17

Y/C Delay................................................................................................................................................................ 17

INPUT SIZE CONTROLS ................................................................................................................................................. 17

Scale Bias................................................................................................................................................................ 17

Input Sizing............................................................................................................................................................. 17

Vertical Shift........................................................................................................................................................... 18

Non-linear Stretch................................................................................................................................................... 18

Input Masking......................................................................................................................................................... 18

INPUT CONTROL MENU ................................................................................................................................................ 19

Deinterlacing Mode................................................................................................................................................ 19

Inter Frame Motion Detection (IFMD)................................................................................................................... 19

Deinterlacing Field Flip ......................................................................................................................................... 19

Genlock................................................................................................................................................................... 19

Game Mode............................................................................................................................................................. 19

Reinterlace.............................................................................................................................................................. 19

INPUT ENHANCEMENT CONTROLS................................................................................................................................. 19

Sharpness................................................................................................................................................................ 19

Noise Reduction...................................................................................................................................................... 20

Adaptive Contrast................................................................................................................................................... 20

Copy Enhancement Settings.................................................................................................................................... 20

MISCELLANEOUS INPUT CONTROLS .............................................................................................................................. 20

Input Label.............................................................................................................................................................. 20

Copy Input Settings................................................................................................................................................. 20

Selecting an Output Configuration for an Input Memory ....................................................................................... 20

SECTION 6 – AUDIO CONFIGURATION............................................................................................................... 21

Introduction to the Audio Menu.............................................................................................................................. 21

Audio Menu Navigation.......................................................................................................................................... 22

Audio Menu Selections............................................................................................................................................ 22

Audio Menu Structure............................................................................................................................................. 22

Audio User EDID.................................................................................................................................................... 24

Input Memory Specific Audio EDID ....................................................................................................................... 24

SECTION 7 - CALIBRATION.................................................................................................................................... 24

SECTION 8 – MISCELLANEOUS COMMANDS.................................................................................................... 25

SYSTEM SETTINGS........................................................................................................................................................ 25

Menu Mode............................................................................................................................................................. 25

Timeouts.................................................................................................................................................................. 25

OSD Enable............................................................................................................................................................ 25

Input Reselect.......................................................................................................................................................... 25

Menu Placement...................................................................................................................................................... 25

Input Menu.............................................................................................................................................................. 25

Initial Power State .................................................................................................................................................. 25

Initial Input State .................................................................................................................................................... 25

On/Off Message ...................................................................................................................................................... 26

Message Control..................................................................................................................................................... 26

Test Patterns........................................................................................................................................................... 26

Remote Control....................................................................................................................................................... 26

LED Setup............................................................................................................................................................... 26

RS-232 Setup........................................................................................................................................................... 26

3D Glasses.............................................................................................................................................................. 26

Zoom Step ............................................................................................................................................................... 27

Quick Keys.............................................................................................................................................................. 27

Table of Contents

Configuration Memory Usage................................................................................................................................. 27

SAVING THE CONFIGURATION....................................................................................................................................... 27

Save......................................................................................................................................................................... 27

Undo ....................................................................................................................................................................... 27

Restore ISF calibration........................................................................................................................................... 27

Revert To Factory Settings...................................................................................................................................... 27

SECTION 9 – 3D SUPPORT....................................................................................................................................... 28

3D TYPES..................................................................................................................................................................... 28

Frame Packed......................................................................................................................................................... 28

Side-by-Side............................................................................................................................................................ 28

Top-Bottom ............................................................................................................................................................. 28

Frame Sequential.................................................................................................................................................... 28

Separate Left and Right........................................................................................................................................... 29

3D OUTPUT SETTINGS.................................................................................................................................................. 29

3D Output Setup Menu............................................................................................................................................ 29

3D Output Mode = Auto ......................................................................................................................................... 29

3D Output Mode = Specific Format ....................................................................................................................... 29

3D Output Type = Auto........................................................................................................................................... 29

3D Output Type = Specific 3D Type....................................................................................................................... 29

3D EDID Configuration.......................................................................................................................................... 30

3D SETUP PROCEDURES ............................................................................................................................................... 30

Normal Setup .......................................................................................................................................................... 30

Display Optimization .............................................................................................................................................. 30

Setup for Non-Compliant Displays ......................................................................................................................... 30

Setup for Non-Compliant 3D Video Sources........................................................................................................... 31

3D Support for 2D Displays.................................................................................................................................... 31

SECTION 10 – DARBEE VISUAL PRESENCE™................................................................................................... 32

DARBEE MENU ............................................................................................................................................................. 32

Darbee menu control .............................................................................................................................................. 32

Gain ........................................................................................................................................................................ 32

Mode....................................................................................................................................................................... 32

Enabled................................................................................................................................................................... 32

View ........................................................................................................................................................................ 32

SECTION 11 – COMMAND INTERFACE ............................................................................................................... 33

DIRECT COMMANDS..................................................................................................................................................... 33

Output Vertical Resolution...................................................................................................................................... 33

Output Mode Commands ........................................................................................................................................ 33

Output Vertical Rate............................................................................................................................................... 33

Output Aspect Ratio................................................................................................................................................ 33

Miscellaneous Commands....................................................................................................................................... 33

MENU SHORTCUTS ....................................................................................................................................................... 33

IR COMMAND LIST....................................................................................................................................................... 33

ASCII COMMAND LIST ................................................................................................................................................ 33

SECTION 12 – SPECIFICATIONS............................................................................................................................ 34

Section 1 – Getting Started

Radiance 2021 and Radiance 2041 rev 053013

Section 1 – Introduction

Thank you for purchasing a Lumagen®Radiance™ video processor. The award winning Lumagen Radiance

video processor family boasts the highest-performance video switching, processing and calibration available.

This makes it ideal for premium quality high-definition home and commercial theater applications.

Lumagen’s Radiance series refines and enhances the video images presented by high definition front

projectors, top-level rear-screen and flat-panel displays.

The Radiance family offers 10-bit front-end, and 12-bit back-end, processing, per-pixel standard definition

(SD) and high definition (HD) video de-interlacing with adaptive diagonal filtering, No-Ring™ scaling

technology that does not add ringing (unlike competing products), MPEG mosquito and block artifact

reduction plus “3D” temporal noise reduction for both SD and HD sources. It supports HDMI®1.4 “3D” and

uncompressed audio formats for Dolby-Digital TrueHD™ and DTS Master-Audio™ bitstream formats.

At the same time Radiance processors can function as a central switching hub for the audio video system.

For these reasons, the Radiance™ processor family sets the industry benchmark for switching, calibration

and video processing performance.

Key Features

•Maximum output rate of 1080p60 for Radiance 2021 and 4k30 for Radiance 2041

•Radiance 2021 and Radiance 2041 have same feature set except maximum output rate

•Proprietary Lumagen No-Ring™ scaling

•Darbee Digital Visual Presence™ (DVP™) enhancement technology

•10-bit processing for deinterlacing plus a 12-bit calibration pipeline

•Support for HDMI®1.4 “3D” including anamorphic lens scaling

•Convert common optional 3D formats to a required 3D formats supported by the display

•Each input has 4 user configuration memories

•Each input user configuration memory has 8 resolution sub-memories (for HD inputs)

•Each resolution sub-memory is linked to one of 8 output configurations.

•2:2, 3:2 and 3:3 pull-down for SD/HD film sources

•Per-pixel SD/HD video de-interlacing

•Adaptive diagonal filtering

•MPEG mosquito and block artifact reduction

•Temporal noise reduction for SD and HD sources

•Output resolution from 480p to 1080p, plus 1080i

•User programmable non-linear-stretch (NLS) mode

•4:3, LBOX, 16:9, 1.85, 2.35 and NLS input aspect ratios

•Programmable output aspect ratio from 1.10 to 2.50

•Extensive support for anamorphic lenses for both 2D and 3D video

•Large suite of test patterns

•Parametric grayscale and Gamma calibration

•Full CMS (Color Management System) using a 125-point 3D linear-gamma RGB color palette

•21-point parameter grayscale and Gamma

•Programmable input/output color-space

•Y/C-delay calibration

•CUE and ICP filtering

•Eight channel audio up to 192 kHz, DD True-HD™ 5.1, and DTS Master Audio™ 5.1 Bitstream

•IR and RS232 control inputs (See Tech Tip 11 and 12 on the Lumagen.com support page)

•Wired IR format command input

•Universal, 100-240V, ~50/60Hz external 12 VDC power supply

•Optional rack mounting ears

Section 1 – Getting Started

Radiance 2021 and Radiance 2041 rev 053013

Document Conventions and Menu Navigation

Commands are selected with the supplied infrared remote or the RS232 serial port. To prevent possible

command conflict, only one of these methods of command should be used at a time. See the Serial RS232

Command Interface section for information on serial commands. The infrared remote control command

notation is described below:

•Remote buttons are named as shown on the remote in a bold font. Example: MENU.

•For comma separated lists, press the buttons in the sequence shown.

•For parenthesized lists, select one button from the list.

•For square-bracketed lists, press the buttons as needed.

Example: For the list [









], press the arrow keys as needed.

•For menu commands press the MENU button. The



and



arrow keys are used to select the

function. The



arrow key (or OK) is used to enter sub-menus. This is shown as: MENU →

MenuItem →MenuItem. Generally, the



arrow key (or EXIT) steps up one menu level.

•Numerical entries are listed as value. For numerical entries, the



arrow key acts as backspace.

•Some commands are activated immediately without the need to press OK. Other commands must

be explicitly accepted by pressing OK. If needed, OK is listed as part of the command, and will

complete the command and return the menu to one level higher in the menu system. Note that,

at default settings, pressing OK when it is not required will bring up the Radiance Status Screen.

•For many commands, pressing EXIT cancels a partially completed command and returns to one

level higher in the menu system. For advanced commands changes are completed from within

the command and EXIT just returns to one level higher in the menu system.

•There are four independent configuration memory types for each input (MEMA, MEMB, MEMC

and MEMD). The input setup and output resolution/timing can be set independently for each

memory. To program an input memory, first select the input, then select the desired

configuration memory and use the menu system to configure.

•Some menu commands are only available when their associated input is selected.

•Before changes are saved, they can be discarded by entering standby (STBY) mode.

•A Save must be performed after any changes or all changes will be discarded the next time the

unit enters standby (STBY), or power is lost. To save press MENU,



, OK, OK, OK.

Unpacking

•Unpack the box.

•Save the box and packing materials in case you need to ship your Radiance.

Verify that your box contains the following items

•Lumagen Radiance video processor.

•Universal, 100-240V, ~50/60Hz, 12 VDC power supply

•Remote control.

•AAA Batteries (2).

•Owner’s Manual.

•RS232 Null-modem cable.

•If purchased, the optional 19 inch rack-mount ears.

Remote Control Battery Installation

1. Locate the battery compartment on the back of the remote control.

2. Move the locking tab to open the door.

3. Remove the old batteries (if applicable).

4. Install two new AAA batteries, observing the battery polarity shown in the battery compartment.

5. Replace the battery compartment cover.

Installation Guidelines

•Select a cool, well-ventilated, dry location.

•Install the Radiance on a flat, level surface such as a table or shelf.

•Alternately the Radiance can be installed in an equipment rack by using optional rack ears.

•Verify that the cooling vents are clear of obstructions to provide convection cooling.

•Only use the Lumagen approved power supply.

•Avoid sudden temperature changes, temperature extremes and excessive humidity.

•Unplug power to the Radiance before cleaning.

Section 2 – Overview

Radiance 2021 and Radiance 2041 rev 053013

Section 2 – Overview

Front Panel

The front panel has a light-emitting-diode (LED) indicator, which is red when the unit is in “standby” and, by

default, is green when the unit is “on.” Note: The green “on” indicator can be turned off if preferred.

Rear Panel

There are four HDMI inputs.

There are two HDMI audio/video outputs and one COAX audio output. Video can be output on one or both

of the HDMI outputs. Audio can be output on the HDMI outputs and/or the COAX output.

Additional connections are provided for wired IR command input (38 KHz IR format), RS232 command

input/update, plus the 12 VDC power input.

These connections are described on the following page.

HDMI Connections

2 HDMI SD/HD Outputs. HDMI1 supports video resolutions up to 1080p60 with support for

HDMI 1.4a audio formats.

4 HDMI SD/HD Inputs. Supports resolutions up to 1080p60

Note: CEC bit pass-through is connected from the HDMI inputs to HDMI Output 1.

Audio Output Connection

1 COAX Audio Output

Miscellaneous Connections

1 IR format command input (See Tech Tip 9 on the Lumagen.com website).

1RS232. Used for command input and for software update (See Tech Tip 6 and 11).

1 Power Input (12 Volts DC)

Section 2 – Overview

Radiance 2021 and Radiance 2041 rev 053013

Remote Control

Power / Standby

ON Power On

STBY Standby

Navigation Control

CLR Clear menu or partial commands

HELP Display context-sensitive help

EXIT Go back one menu level

OK Enter/Accept command, display info screen



Menu navigation / zoom in



Menu navigation / zoom out



Menu navigation / input aspect



Menu navigation / input aspect

Numeric Entry

1-9Input 1 to 9

+10 Input 10 and greater

Picture-In-Picture (PIP)

OFF Not applicable

SEL Not applicable

SWAP Not applicable

MODE Not applicable

Input Aspect Ratio

4:3 4:3 (1.33) aspect ratio

LBOX Letterbox

16:9 16.9 (1.78) aspect ratio

1.85 1.85 aspect ratio

2.35 2.35 aspect ratio

NLS Non-Linear-Stretch

Misc Buttons

INPUT Precedes input # selection

ZONE <not implemented>

ALT Alternate info screens

PREV Previous output

Configuration Memories

MEMA Memory A

MEMB Memory B

MEMC Memory C

MEMD Memory D

Note: PiP/PoP is

not available for

this product.

Section 2 – Overview

Radiance 2021 and Radiance 2041 rev 053013

Block Diagram

The function of the Radiance is to act as a video switch, process the selected video source and then output

video in the appropriate format and resolution. Standard definition (SD), enhanced-definition (ED), and

high-definition (HD) video inputs, are supported. Video inputs are converted to progressive video (if

necessary) and are then scaled to the video output resolution.

Interlaced video has been in use for more than 50 years and is still the most common video format. It

displays half of the lines of picture information each sixtieth (or fiftieth) of a second. Each half of the image

is called a field and displays either all the even lines, or all the odd lines. So, an entire image, called a

frame, takes a thirtieth (or twenty-fifth) of a second to display on the screen. An “i” suffix on the resolution

specification is used to indicate interlaced formats.

In contrast, progressive video presents each frame as a whole. A “p” suffix on the resolution specification is

used to indicate progressive formats. Converting interlaced video to progressive video is referred to as

“deinterlacing.”

The Radiance is comprised the following major functional sections:

•Video/Audio input selection

•Video deinterlacing (if required)

•Video processing and scaling

•Video/Audio output

The functional blocks are shown below.

If the video input is interlaced, it is first deinterlaced into a progressive format. User enabled noise reduction

algorithms are then applied. Proprietary No-Ring™ scaling algorithms are used to scale the resulting

progressive video to the optimal size for the display.

Ce manuel convient aux modèles suivants

Table des matières

Manuels Processeur vidéo populaires d'autres marques

RGBlink

RGBlink VSP 168HD Manuel utilisateur