Lucky Star p4a845d Manuel utilisateur
P4A845D
(INTEL i845D Chipset, S-478)
With DDR 200/ 266 Memory
For Pentium®4 400MHz FSB PC System
Main Board
User’s Manual
(Ver.:1.0)
Copyright
Copyright©2001 by this company. No part of this document may be
reproduced, transmitted, transcribed, stored in a retrievable system,
or translated into any natural or computer language, in any form or
by any means without prior written permission. This manual and the
information contained here are protected by copyright. All rights
reserved.
Copyright 2001. All Rights Reserved.
Revision History
Revision Date Release Notes
1.0 Dec.-2001 First Official Release
Warning and disclaimer
This manual is designed to provide information about the Pentium®4
main-board. Effort have been made to make this manual as accurate
as possible, but no warranty or fitness is implied. All the information
is provided on an 'as is' basis. The author and his corresponding
publishing company shall have neither liability nor responsibility to
any person or entity with respect to any loss or damages arising
from the information contained in this manual or from the use of the
system board that accompanies it.
Information contained in this manual is subject to change without
notice. The manufacturer of the system board will not be held
responsible for technical or editorial omissions made herein, nor for
the incidental or consequential damages resulting from its
furnishing, performance, functionality or use. Subsequent changes to
this manual will be incorporated into the next edition. We welcome
any suggestion regarding this manual or our computer products.
Trademarks
●Intel®and Pentium®are registered trademarks of Intel®Corporation.
●IBM®is a registered trademark of International Business Machines
Corporation.
●Microsoft®is a registered trademark of Microsoft®Corporation.
●PCI®is a registered trademark of PCI®Special Interest Groups.
●AWARD®is a registered trademark of Award Software Inc.
All other trademarks are the property of their respective owners.
1
Table of Contents
Chapter 1 Introduction…………………………………………1
1-1 Main Specifications……………………………………………………2
1-2 System Configuration……………………………………………..……4
1-3 Notice of Hardware Installation………….……………………....……5
Chapter 2 Installation……………….……………………….…6
2-1 Component Locations …………………..…………………………..…6
2-2 Layout Reference……………………………………………..………..7
2-3 Jumper Setting……………………………………..………..……….8
2-3-1 JP2/ JP7: USB Wake Up Function …………………………………8
2-3-2 JP3: Keyboard Wake Up Function…………………………………9
2-4 CPU Installation………………. ………………………………………10
2-4-1 CPU and System Cooling………………………….…………………13
2-5 Connectors………..……………………………………………………14
2-5-1 Front Panel…………………………………………………….………14
2-5-2 Back Panel Connectors………………………………………………16
2-5-3 Power Supply Connector……………………………………………18
2-5-4 Floppy Disk Connector………………………………………………19
2-5-5 IDE1 and IDE2………………………………………………………20
2-5-6 Internal Audio Connecotrs……………………………………………21
2-5-7 WOL1:WakeUp On LAN (Optional)………………………………22
2-6 Memory………………………………………………………………23
2-6-1 Memory Installation…………………………………………………24
Chapter 3 Software Installation………………………………25
3-1 Notice of Driver Installation…………………………………………25
3-2 How to Install Software Drivers…………………………………….26
2
Chapter 4 The BIOS…………………………………………27
4-1 Updating the BIOS……………………………………………………28
4-2 The CMOS Memory…………………………………………………29
4-3 The BIOS Setup Pages………………………………………………31
4-3-1 Standard CMOS Setup………………………………………………34
4-3-2 BIOS Features Setup…………………………………………………38
4-3-3 Chipset Features Setup………………………………………..……42
4-3-4 Integrated Peripherals………………………………………..……...45
4-3-5 Power Management Setup………………………………………….50
4-3-6 PNP/PCI Configuration Setup……………………………………….53
4-3-7 PC Health Status……………………………………………………55
4-3-8 Frequency/Voltage Control.…………………………………………56
4-3-9 Passwords Setting……………………………………………………..57
Chapter 5 Appendix………………………………….………59
5-1 Memory Map………………………………………………….………59
5-2 I/O Map………………………………...….………………………….60
5-3 Time & DMA Channels Map…………………………………………61
5-4 Interrupt Map………………………………………….……………...62
5-5 RTC & CMOS RAM Map………………………………………….63
5-6 ISA I/O Address Map……………………………………………..64
Chapter 6 Q & A…………………………………………………………………66
Important Warnings:
STOP
WARNING: NEVER run the processor without the heatsink properly and firmly
attached. This will damage the processor within SECONDS. Also do NOT try to use
Pentium Heatsinks, these will NOT fit and do NOT provide adequate cooling.
STOP
WARNING: Make sure your power supply can deliver the power your system needs.
We recommend AT LEAST a 250W power supply. Even better, get a 300W power
supply, especially when using many peripherals.
1
Chapter 1 Introduction
Thank you for purchasing this high quality motherboard, we are confident that you will be
able to use this motherboard to your full satisfaction. This manual is divided into 6 main
sections, as described below:
.
Introduction
The introduction contains information on the main specifications for this motherboard, the
package contents and cautionary notes.
Hardware Installation
The Hardware Installation section is the most important in the manual. It describes in detail
how to set the motherboard up for operation. Read all information and follow all steps,
especially if you are a new user.
Software Installation
The software section describes the drivers that need be installed to make your OS operates
properly. The drivers are provided on the driver CD.
BIOS Setup
Information on how to enter the BIOS setup and change settings is given here. In addition
all individual BIOS items are described. Although some BIOS setting information is given
in the hardware installation section where appropriate, refer to the BIOS Setup Section for
details.
Appendix
Provides useful information
Q & A
2
1-1 Main Specifications
PCB board size and form factor: 24.0cm x 30.5cm, ATX type.
PCB layer: 4 layers
Supported CPUs
Can support the latest 400MHz system bus Socket-478 Intel P4 CPUs up to 2GHz or higher
speed!
Intel i845D Chipset (Called MCH)
The Intel®i845D chipset consists of the following main components: Intel®Memory
Controller Hub (MCH) and the Intel I/O Controller Hub 2 (ICH2). All these components
are interconneted via and Intel proproetary interface called Hub Interface. The Hub
Interface is designed into the Intel 845 Chipset to provide efficient communication between
components.
Additional hardware platform features include AGP 4x mode, DDR200/ 266 System
memory, Ultra ATA/100, and Universal Serial Bus (USB). The platform is also ACPI
compliant and supports Full-on , Suspend to Disk, and Soft-off power management states.
Memory
This motherboard comes equipped with two Double Data Rate (DDR) Memory Module
sockets to support DDR 200MHz/ 266MHz-compliant (32, 64, 128, 256MB, or 512MB)
DDR Modules up to 2GB.
Only supports DDR-200/ 266 memory.
AGP (Accelerated Graphics Port)
Allows only AGP 2.0 including 4X AGP VGA cards. Do not install any graphics cards
which have no support for AGP 4X into I845D based motherboards. Otherwise, the
AGP slot of your motherboard will be irretrievably damaged because of the TOO
HIGH VOLTAGE (AGP 2X - 3.3V, AGP 4X -1.5V)
PCI Expansion Slots
With five 32-bit PCI (Rev. 2.2) expansion slots, which can support Bus Master PCI cards,
such as LAN or Video-grabber cards (PCI supports up to 133MB/s maximum throughput),
this motherboard is ready for the most demanding applications.
3
CNR Slot
A Communication Networking Riser (C.N.R.) slot can be fitted with CNR MODEM, or
MODEM/ LAN 10/100M card.
USB interface
With support for up to 4 USB Ver. 1.1 ports, two on-board, this motherboard provides
ample USB expansion room.
IDE interface
This motherboard comes with an onboard PCI Bus Master IDE controller with two
connectors that support four ATA66/ 33 devices on two channels. Supports UDMA/66,
UDMA/33, PIO Modes 3 & 4 and Bus Master IDE DMA Mode 2, and Enhanced IDE
devices, such as CD-R/ RW, DVD-ROM, CD-ROM, Tape Backup and LS-120 drives. An
IDE-3/4 RAID function is optional.
Super Multi-I/O
This functionality is integrated into the southbridge of the chipset. It provides two high-
speed UART compatible serial ports and one parallel port with EPP and ECP capabilities.
Infrared (IrDA) Connector
This functionality is also integrated into the southbridge of the chipset. The IrDA connector
supports an optional IR remote control device for wireless interfacing with external
peripherals, personal gadgets, or an optional remote controller.
System BIOS
This motherboard comes with a 2MB BIOS that provides CPU/ SDRAM frequency, boot
block write protection, and HD/ SCSI/ CD/ Floppy boot selection. DMI is also supported
through BIOS, which allows hardware to communicate within a standard protocol creating
a higher level of compatibility.
Special Function
A. Over 300W P4 type power supply is needed, meanwhile over 250W PIII type
power supply is acceptable but not guaranteed for proper function.
B. Provides CPU over-clocking up to 133MHz by BIOS setting but not guaranteed
for this function. Vendor is not Responsible for any damage on CPU or main
board due to the over-clocking failure (Jump cap to “2-3” of JP6 to reset BIOS if
over-clocking fails).
C. AC-97 Sound Codec chip provides “ amplifier“ function.
D. Optional IDE 0/1 RAID function by using “PROMISE“ PDC 20265R chipset.
Only 4X AGP is acceptable.
4
5
1-2 System Configurations
Below is the i845 chipset based system configuration:
Brookdale
MCH
Intel Pentium 4 processor
System Bus
3.2GB/s
2.1GB/s
8-Bit Hub
Interface
266MB/s
AGP4X (1.5V)
1.06GB/s
DDR200/266
ICH2
AGP
Graphics
AC-97 Modem CODEC
(optional)
2 ATA100 IDE Channels
4 USB 1.1 Ports
PCI Bus
SIO Flash
BIOS
DDR200/266
Table des matières
