LuCell LU-1000 Manuel utilisateur

User Manual 2

Basic

Components

Basic

Components of

the LuCell safe

Names for each

Safe

Touch panel Start button

Safe front Body

Rack

Password change button

Battery case

High strength bolts

Alarm

Manual

Impact Alarm

9V battery Rack & hanger (4)

DC 6V Adapter Key and card pocket Fingerprint module

User Manual 3

Soft

Touch

1. Press the Start button at the center of touch panel in the upper part of the door

·The touch panel will be activated if you press the start button

·If you press the button twice in a row, the safe will change security mode

with the password cleared.

2. Enter the password

·The password is set to '1,2,3,4,5,6'when the safe is delivered.

·Press carefully so you do not hit an unintentionally button.

·If the password is continuously entered incorrectly ve times, the alarm will

sound for three minutes. Donot removethe battery while the alarm sounds.

wait for three minutes and then use the safe after the alarm has stopped.

3. Check 'OPEN' on theouch panel and listen to the sound.

4. Grasp the upper part of the door and open it.

·Do not use excessive force to open thedoor.

·Take care that your hand does notget jammed in the door when opening

the safe

How to open the safe

1. The door locks automatically when it is closed.

·Becareful that your hand does not get jammed in the door when closing the safe

·Close the safe completely after checking out to prevent something from getting

caught in the door.

·Keep small electronic devices,such as digital cameras, laptops, watches

(including mechanical models) stored away from the door to prevent damage

from exposure to electromagnetic elds.

How to lock the safe

Press START button Enter your password 'OPEN' displayOpen the safe

User Manual 4

Battery

·Durability of battery depends on the number of using, including how often the

safe is used.Change thebatteries on the assumption that it will last three to

ve months on average.

·Immediately change the tbattery in case ofabattery alarm message and

warning sound, which mean that the battery voltage is approaching the

minimum level for proper function.

·Also immediately change the battery in case of any of the following

phenomena

1) The touch panel malfunctions.

2) The LED cannotlight on.

3) The message 'GOOD' shows when thebattery is not changed.

4) The LED turns o while using the touch panel.

1. Take hold ofthe part marked 'BATTERY' on the right side of the touch panel.

2. Push and release your ngers and thebattery tray will come out.

3. Pull out the battery tray completely, remove the old battery, and replace

the new battery inthe tray, making sure to align thepolarity properly.

4. Push and release your ngers to close it.

When change

batteries

How to change

batteries

Find the part marked

'BATTERY' on the

panel, Fold and release

your ngers

Change batteries Push the battery tray

User Manual 5

1. Enter the current password and open the safe.

· You can change the password only with the door open

2. Press the Red Password change button 1 time.

·When the LCD display shows '1 USEr' and 'COdE'messages on the screen,

enter your current password.

·When the safe is delivered, thepasswrod is set to 1, 2, 3, 4,5, 6.

·If the password is correct, you will see -PASS- onthe screen

3. Enter your new code when the LCD display shows '1-COdE', and

press START button.

·The touch panel will shut o unless you press the button within four seconds

of entering a new password.

4. Enter your new password once again when the LCD display shows ' 2-COdE'

and press START button.

·If you see 'FInISH' on the LCD new password has been successfully

Password

Change password

Password button has been

side of door

Enter your current password

Enter your new password

once again

Press the red password

change button 1time

Password change success

Password change

complete

1 USEr message

Enter yournew password

User Manual 6

1. Open safe door and nd the alarm inside the door.

2. Push the button onthe top of the alarm to turn on the power.

3. Normal alarm setting is complete if the red power light on the LED ashes on

and o with the button to turn on.

4. The impactalarm will be activated 15 secondsafter thedoor is closed after

setting the alarm, and the safe will be protected.

(To shut o the alert sound, push the power button to turn o)

1. The alarm battery needs to be changed if the impact alarm alert sound

and the red signal have become weak, which means the battery is exhausted.

2. If you grasp the impact alarmhandle and push both ends simultaneously

you can easily attach and detach the alarm.

3. Open the cover on the back and changethe battery on the correct positive

and negative sides.

1. The impactalarm alert sound is 120 dB, and long time exposure to it may

cause damage to the hearingorgans. Thus, any use of thealarm outside

of the safe is absolutely prohibited.

2. The sudden onset ofthe aleart sound may startle pregnant women, elderly

persons, or those who are sensitive to sharp noises.

3. Instructchildren not to dismantle or ddle with the alarm.

Small impact

Alarm

How to activate the

alarm

How to change the

alarm battery

Notes on use

Alarm position Alarm Back cover ON/OFF button

User Manual 7

1. Press the START button at the center of touch panel in theupper part

of the door.

2. Fingerprint recognition sensor will blink.

3. When the light blinks, move your nger to the ngerprint sensor.

·The LCD displaywill show 'Err-04' mesaage if your ngerprint incorrectly

touches the sensor.

4. Check 'OPEN' message on the touch panel and listen for the sound.

5. Grasp the upper part of the door and open it

·Place your ngerprint in the middle of the sensor and closely press your

ngerprint down.

·Some ngerprints might notbe recognizable in case of their impression

is not clear.

·The lock can store maximum 10 ngerprints.

All ngerprints stored will be deleted if you choose to delete a ngerprint.

Fingerprint lock

How to use a

ngerprint lock

Note on use

Press the START

button

Sensoris activated Place your nger on the

ngerprint sensor

Open thedoor

User Manual 8

Note : The lock memory can save up to 10 ngerprints, and the LCD display

will show 'FULL' when the number of ngerprints excesses.

1. Enter the current password and open the safe.

·You can register the ngerprint only with the door open.

2. Before continuing, nd the red password change button inside the safe

on the left side.

·See page 2 for a diagram showing the location ofthe passwrod

change button

3. Press and hold the red password change button for 5 seconds.

·When the LCD display show '1 FIngEr' and 'COdE' messages on the screen,

enter your current password.

(If the password is correct, you will see '-PASS-' on the screen.

4. Place your ngerprint to the ngerprint sensor when the LCD display

show '1tOUCH'.

·When the display show 'OFF', take o your nger from the sensor.

·Place your ngerprint in the middle ofthe sensor and closely

press your ngerprint down.

5. When the LCD display shows '2tOUCH', place your ngerprint once

again to the sensor.

6. The ngerprint has been entered successfully if you see 'REC 01'

on the LCD display.

·The number after the 'REC' indicates how many ngerprints

stored in the memory.

How to register a

ngerprint

User Manual 9

Note : All ngerprints stored will be deleted if you choose to delete a ngerprint

1. Enter the current password and open the safe.

·You can delete the ngerprint only with the door open.

2. Before continuing, nd the red password change button inside the safe

on the left side.

·See page 2 for a diagram showing the location ofthe password change

button.

3. Press and hold the red password change button for 5 seconds.

·When the LCD display shows 'FIngEr' and 'COdE' messages on the screen,

enter your current password.

If the password is correct, you will see '-PASS-'on the screen.

4. Press the red password changebutton immediately.

5. The ngerprints have been removed successfully if the LCD display

shows 'ErASE'.

How to delete a

ngerprint

Password change button

location

Press button for

5 seconds

Press button 1time

Display 'FIngEr' and

'COdE'

Notice of deletionEnter your current

password and display

'-PASS-'

User Manual 10

AC TO DC Adapter

·Lucell supports hybrid power that can run on eitherbattery or adapter.

·Internal lighting can be used when the adapter is in use for power supply.

·Adapter must beDC6V 1A typewith sickle-shaped('ㄱ') connector.

·Connector is size A6 (outside dia. 5.5mm x inside dia. 2.1mm)

·Center of connector has (+) polarity, and external side has (-) polarity.

1. Check adapter jackon the lower right side ofa safe's door.

·You can feel the connector with your hands.

2. Insert adapter connector in the jack.

·Please make sure the connector is fully inserted.

3. Plug in the adapter cord, and conduct a test run before use.

·When using an adapter, battery is not used for power supply, in case of

power failure, battery use is automatically re-activated.

·Adapter needs to be purchasedseparately because of varying

voltages in dierent countries.

How to use an AC,

DC adapter

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels LuCell Sûr

LuCell

LuCell AEGIS Manuel utilisateur

LuCell

LuCell UP-040 Manuel utilisateur

LuCell

LuCell MC-020 Manuel utilisateur

Manuels Sûr populaires d'autres marques

Squire

Squire Stronghold Keysafe Manuel utilisateur

Phoenix

Phoenix FS0352C Fiche d'information produit

Phoenix

Phoenix KS0030E Series Manuel utilisateur

Vaultek

Vaultek 10 Series Fiche technique

Arregui

Arregui CLASS Manuel utilisateur

Beaumont

Beaumont SMART KEYBOX Manuel utilisateur

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur

Hornady

Hornady SnapSafe Trunk Safe II Manuel utilisateur

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuel utilisateur

Honeywell

Honeywell 5912 Manuel utilisateur

Phoenix

Phoenix FS1280F Manuel utilisateur

Phoenix

Phoenix SS0992K Fiche d'information produit

Technomax

Technomax Trony Series Manuel

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuel utilisateur

RICHTER CZECH

RICHTER CZECH LA Manuel d'utilisation

Olymp

Olymp GOsafe 110 Manuel utilisateur

Phoenix

Phoenix SS0100E Fiche d'information produit

Clarke

Clarke Strong-Arm CS1000K Mode d’emploi