LTS LTD9116MKIT Manuel utilisateur

UserManual

LTD9116MKIT User Manual

LTS Products

LT Security, Inc.

19455 E. Walnut Drive North

Walnut, CA 91789

Website:

http://www.LTSecurityinc.com

Tech Support:

Toll Free：888-587-5871

Email：[email protected]

UserManual

Contents

Chapter 1: DVR Features........................................................................................................................................3

DVR Feature ......................................................................................................................................................3

Chapter 2: Overview................................................................................................................................................3

2.1 Front Panel ...................................................................................................................................................3

2.2 Rear Panel ....................................................................................................................................................4

2.3 Remote Control ............................................................................................................................................4

Chapter 3: Installation.............................................................................................................................................5

3.1 Install Hard Disk ..........................................................................................................................................5

3.2 Connecting Camera and Monitor .................................................................................................................5

3.3 VGA Output .................................................................................................................................................5

3.4 Connecting Power Supply............................................................................................................................5

Chapter 4: Starting the DVR...................................................................................................................................5

4.1 Firmware Version .........................................................................................................................................5

4.2 Detecting Installed Hard Drive.....................................................................................................................6

4.3 Format Hard Drive .......................................................................................................................................6

Chapter 5: DVR Menu System................................................................................................................................6

5.1 Navigating the Menus ..................................................................................................................................6

5.2 Menu Overview............................................................................................................................................7

5.3 Camera Setup ...............................................................................................................................................7

5.4 Record Setup ................................................................................................................................................7

5.5 Record Frame Rate.......................................................................................................................................8

5.6 Video Quality ...............................................................................................................................................8

5.7 Record Schedule...........................................................................................................................................8

5.8 Sensor Setup.................................................................................................................................................9

5.9 H/W Sensor Setup ........................................................................................................................................9

5.10 Motion Detector Setup .............................................................................................................................10

5.11 Hard Drive Setup......................................................................................................................................10

5.12 Miscellaneous Setup - Change Password .................................................................................................11

5.13 Miscellaneous Setup - Set Time ...............................................................................................................11

5.14 Miscellaneous Setup - Hidden Channel ...................................................................................................12

5.15 Miscellaneous Setup - Audio Port Setup ..................................................................................................12

5.16 Miscellaneous Setup - PTZ Setup ............................................................................................................12

5.17 Miscellaneous Setup - Image Parameters.................................................................................................13

5.18 Miscellaneous Setup - Password Enable ..................................................................................................13

5.19 Miscellaneous Setup - Keypad Tones.......................................................................................................14

5.20 Miscellaneous Setup – SEQ.Dwell Time .................................................................................................14

5.21 Miscellaneous Setup - VGA Setup ...........................................................................................................14

5.22 Network Setup..........................................................................................................................................14

5.23 Language ..................................................................................................................................................18

5.24 Reset Menu...............................................................................................................................................18

5.25 NTSC/PAL Output select .........................................................................................................................18

Chapter 6: Record..................................................................................................................................................19

6.1 Start Recording...........................................................................................................................................19

UserManual

6.2 Audio Recording ........................................................................................................................................19

6.3 Stop Recording...........................................................................................................................................20

6.4 Estimated Recording Length......................................................................................................................20

Chapter 7: Playback...............................................................................................................................................20

Chapter 8: USB Progamming................................................................................................................................21

8.1Driver Installation: ......................................................................................................................................21

8.2 Program Interface.......................................................................................................................................21

8.3 Program Running .......................................................................................................................................22

Chapter 9: Specification ........................................................................................................................................25

9.1 DVR ...........................................................................................................................................................25

9.2 CAMERAS.................................................................................................................................................25

Chapter 10:Appendix............................................................................................................................................26

10.1 System connect sketch map......................................................................................................................26

10.2 Accessories Included With DVR..........................................................................................................26

UserManual

Chapter 1: DVR Features

DVR Feature

MPEG-4 compression

9 BNC Camera Inputs - 1 BNC Video Output

1 Audio Input -1 Audio Output

System Format : NTSC /PAL

Motion Detection with Sensitivity and Area Settings

Time Schedule, Alarm and Motion Triggered Recording Modes

Hard Disk Support up to 500GB

Supports PTZ Control via RS-485 Port

View and Operate over Network (Broadband Connection Required)

Built-in USB 2.0 Port for Backup to Computer

VGA Output

Chapter 2: Overview

2.1 Front Panel

1.Power LED 11. IR receiver

2. HDD LED 12.REW: rewind

3.Search 13.PAUSE

4. MUTE: turn on/off audio output 14.PLAY

5. CH-: view previous channel 15.FWD: forward

6.CH+: view next channel 16.STOP

7.ALL: view all channels 17.REC: record

8. MENU/ESC/LEFT 18.DOWN

9. UP 19.PTZ:enter PTZ mode

10. SEL/EDIT/RIGHT

UserManual

2.2 Rear Panel

1. Audio Input

2. Video output

3. CH1-CH9:video input 1- video input 9 9.DC Power Input Jack

4. VGA output

5.USBport

6. LAN: Ethernet port

7. Audio output

8.RS-485/Sensor/Alarm

10.Power switch

11. Grounding

2.3 Remote Control

1-9 Channel Select 1-9

0 Number

ALL Display all Channels

Menu Enter or Exit Menu

▲Move Up

▼Move Down

◄/ ►Left/ Right

SEL Select /Modify Item

Rewind

Play Recording

Fast Forward

●Record

Pause

■Stop Recording/Playback

Audio/Search Search Recorded files

Mute Turn on/off audio output

UserManual

Chapter 3: Installation

3.1 Install Hard Disk

NOTICE: Don’t take out HDD when DVR is running.

(1) Remove the screws around the top cover.

(2) Remove the top cover carefully.

(3) Connect the power cord and data cable to hard disk carefully.

(4) Use the provided screws to fix hard disk on the rack inside and then replace the

top cover of the case.

3.2 Connecting Camera and Monitor

There are 9 camera inputs and 1 Monitor output with BNC connectors (Refer to 2.2

Rear Panel).

3.3 VGA Output

There is 1 CRT or LCD monitor output with VGA port.

3.4 Connecting Power Supply

Please only use the power adapter supplied with the DVR.

Chapter 4: Starting the DVR

4.1 Firmware Version

After connecting the power adapter

and turning on the power button, the system

will boot-up and display the version and

released date of the DVR firmware.

2008.5.5

V 2.3

V-MLANG

UserManual

4.2 Detecting Installed Hard Drive

CHECKING HDD……

MASTER [WDC WD3200AAJB-00T]

SLAVE……

DVR will detect the installed hard drive and

display the hard drive information.

4.3 Format Hard Drive

Chapter 5: DVR Menu System

5.1 Navigating the Menus

(1) Press[MENU] to enter Main Menu

(2) Press[▲or ▼]to move the cursor

(3) Press [SEL] to select/modify

settings

(4)Press [MENU] again to exit or go

back to previous menu.

MAIN MENU

CAMERA SETUP

RECORD SETUP

RECORD FRAMERATE

VIDEOQUALITY NORMAL

RECORD SCHEDULE

SENSOR SETUP

HARD DRIVE SETUP

MISCELLANEOUS SETUP

NETWORK SETUP

LANGUAGE ENGLISH

RESET MENU

( )MOVE (SEL)SELECT (MENU)EXIT

CHECKING HDD……

MASTER [WDC WD3200AAJB-00T]-NEW-DVR

FORMAT HDD CONFIRM

(SELECT) FORMAT / (MENU) CANCEL?

When the DVR detects a new hard drive,

you will be prompted to format the hard drive

before using the DVR.

Press [SEL] to format or press [MENU]

to cancel.

UserManual

5.2 Menu Overview

MenuDirectory

Camera Setup

Record Setup

Record Frame rate

Video Quality

Record Schedule

Sensor Setup

Hard Drive Setup

Miscellaneous Setup

Network Setup

Language

Reset Menu

5.3 Camera Setup

5.4 Record Setup

Camera Setup allows you to turn

cameras on or off.

Press [▲, ▼, ◄◄ and ►►]buttons

to select a channel and then press [SEL]

to modify the setting ON or OFF.

Note：If a camera channel is set to OFF ,it

will not be recorded(Refer to 6.4 Record

tup)

Main Menu

Change Password

Set Time

Hidden Channel

Audio Port Setup

PTZ Setup

Image Parameters

Password Enable

Keypad Tones

Seq.Dwell Time

VGA Setup

Record Setup allows you to set up

recording channels.

Press [▲, ▼, ◄◄ and ►►]buttons to

select a channel, and then press [SEL] to

modify the setting to ON or OFF.

If a channel is disabled in Camera Setup, it

will not record and the DVR will display

“NOCAM” on screen.

1 ON 2OFF 3ON

RECORD SETUP

4ON 5ON 6ON

7ON 8ON 9ON

( )MOVE （SEL）SELECT (MENU)EXIT

1 ON 2OFF 3ON

CAMERA SETUP

4ON 5ON 6ON

7ON 8ON 9ON

( )MOVE （SEL）SELECT (MENU) EXIT

UserManual

5.5 Record Frame Rate

(

The total frame rate is 50fps (PAL) or

0fps (NTSC). You can set the frame rate

or the channel which you selecte to record.

f the sum of the frame rate you select for

ll cameras is more than 50fps (PAL)/60fps

NTSC), the DVR will automatically adjust

he largest frame rate value to a smaller

value.

1 5 FPS 2 5 FPS 3 5 FPS

RECORD FRAMERATE

TOTAL 45FPS

4 5 FPS 5 5 FPS 6 5 FPS

7 5 FPS 8 5 FPSN 9 5 FPS

( )MOVE （SEL）+ ( □) - (MENU) EXIT

Press [▲, ▼, ◄◄ or ►►] button to select a channel, and then press [SEL] to

increase the value or press [■STOP] to reduce the value.

Note: Higher frame rate shows smooth images, but requires more hard drive

space.

5.6 Video Quality

Video Quality has 4 different settings:

Highest, High, Normal and Low.

The higher the video quality, the

better quality of Images, however higher

quality images require more hard drive

space.

MAIN MENU

CAMERA SETUP

RECORD SETUP

RECORD FRAMERATE

VIDEOQUALITY NORMAL

RECORD SCHEDULE

SENSOR SETUP

HARD DRIVE SETUP

MISCELLANEOUS SETUP

NETWORK SETUP

LANGUAGE ENGLISH

RESET MENU

( )MOVE (SEL)SELECT (MENU)EXIT

5.7 Record Schedule

Setting the Record Schedule allows you to customize the type of recording

depending on the time of day.

Press [SEL] to change the quality

setting.

The time line indicates 24 hours of a

day based on AM/PM (0 = 12).

Press [▲, ▼, ◄◄ or ►►] button

to select a time point, press [SEL] to

modify the recording mode.

RDCORD SCHEDULE

AM PM

0… 3… 6… 9… 0… 3…. 6… 9…

NO-RECORD

NORMAL-RECORD

SENSOR-RECORD

( )MOVE (SEL)SELECT (MENU)EXIT

UserManual

NO-RECORD [ white]: DVR will not record during the time.

NORMAL-RECORD [ red]: DVR will record continuously.

SENSOR-RECORD [S]: DVR will record when sensor or motion is triggered.

NOTE: In order to activate the record schedule, press the []record button when

viewing the cameras. After pressing the []record button, if schedule is set to

“NORMAL-RECORD” , the DVR will start to record immediately; if the schedule is

set to be “SENSOR-RECORD” , the DVR will not start recording until a motion is

detected by the DVR or an installed sensor is triggered.

5.8 Sensor Setup

CONT: Continuous alarm until any key is pressed

OFF: No alarm

Note: Sensored Record Time and Alarm On Time are measured in seconds

5.9 H/W Sensor Setup

Note: Sensors and extension alarm are not included with the DVR system and may

be purchased separately.

SENSOR SETUP

SENSORED RECORD TIME 30

ALARMONTIME OFF

H/W SENSOR SETUP

MOTION DETECTOR SETUP

( )MOVE (SEL)SELECT (MENU)EXIT

H/W SENSOR SETUP

CHANNEL-1 NOT INSTALLED

CHANNEL-2 TYPE:NORMAL-OPEN

CHANNEL-3 NOT INSTALLED

CHANNEL-4 NOT INSTALLED

CHANNEL-5 NOT INSTALLED

CHANNEL-6 NOT INSTALLED

CHANNEL-7 NOT INSTALLED

CHANNEL-8 NOT INSTALLED

CHANNEL-9 NOT INSTALLED

( )MOVE (SEL)SELECT (MENU)EXIT

Senso

Record Time indicates how

long the recording time is when the

motion or sensor is triggered.

Alarm On Time indicates whether the

buzzer will sound when motion is

detected.

HARDWARE SENSOR SETUP:

There are 3 different modes for sensor

setting: NOT INSTALLED,

NORMAL-CLOSE and NORMAL-OPEN.

Consult the alarm purchased for more details

on which setting is required.

Table des matières

Autres manuels LTS Système de sécurité

LTS

LTS LTK3400MF Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur