LTS LTH-D301GY-WIFI-2 Manuel utilisateur

Network Indoor Station

Installation Guide

Network Indoor Station Installation Guide

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could

result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,

could result in equipment damage, data loss, performance

degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement

important points of the main text.

Network Indoor Station Installation Guide

Contents

Chapter 1 Appearance................................................................................................................1

Chapter 2 Terminal and Wiring Description ................................................................................3

2.1 Terminal Description .............................................................................................................3

2.2 Wiring Description.................................................................................................................3

Chapter 3 Installation.................................................................................................................5

3.1 Wall Mounting Plate .............................................................................................................5

3.2 Wall Mounting with Junction Box ........................................................................................5

Network Indoor Station Installation Guide

Chapter 1 Appearance

Front Panel

Figure 1-1 Front Panel

Table 1-1 Description

No.

Description

Display Screen

Microphone

Network Indoor Station Installation Guide

Rear Panel

Figure 1-2 Rear Panel

Table 1-2 Description

No.

Description

Debugging Port

Network Interface

Loudspeaker

TF Card Slot

Alarm Terminal

Reserved

Network Interface and Power Supply

Note

The debugging port is used for debugging only.

Network Indoor Station Installation Guide

Chapter 2 Terminal and Wiring Description

2.1 Terminal Description

There are 20 pins in the terminal on the rear panel of the indoor station: 2 RS-485 pins, 5 reserved

pins, 4 relay output pins, 8 alarm input pins, and 1 GND pin.

Figure 2-1 Terminal Description

2.2 Wiring Description

Wire the devices with power supply cables as picture shown below.

Door station should be connected to CH6 of the video/audio distributor with two-wire cables.

Indoor Station should be connected to any terminal of CH1 to CH5 of the video/audio distributor

with two-wire cables.

Caution

Make sure all the related equipment is power-off during the installation.

Network Indoor Station Installation Guide

Figure 2-2 Wiring Description

Network Indoor Station Installation Guide

Chapter 3 Installation

Indoor station supports wall mounting.

3.1 Wall Mounting Plate

The wall mounting plate and the junction box are required to install the indoor station onto the

wall.

The dimension of junction box should be 75 mm (width) × 75 mm (length) × 50 mm (depth).

The dimension of wall mounting plate is shown.

Figure 3-1 Wall Mounting Plate

3.2 Wall Mounting with Junction Box

Before You Start

Note

●Make sure the device in the package is in good condition and all the assembly parts are

included.

●The power supply the indoor station supports is 12 VDC. Please make sure your power supply

matches your indoor station.

●Make sure all the related equipment is power-off during the installation.

Network Indoor Station Installation Guide

●Check the product specification for the installation environment.

Steps

1. Chisel a hole in the wall. The size of the hole should be 76 mm (width) × 76 mm (length) × 50

mm (depth).

2. Insert the junction box to the hole chiseled on the wall.

3. Fix the wall mounting plate to the junction box with 2 screws.

4. Hook the indoor station to the wall mounting plate tightly by inserting the plate hooks into the

slots on the rear panel of the indoor station, during which the lock catch will be locked

automatically.

Figure 3-2 Wall Mounting with Junction Box

Autres manuels pour LTH-D301GY-WIFI-2

Table des matières

Autres manuels LTS Système d'interphone

LTS

LTS LTH-401M-WIFI Manuel utilisateur

LTS

LTS LTH-M201-C Manuel utilisateur

LTS

LTS LTH-D311GY-WIFI Manuel utilisateur

LTS

LTS LTH-301m-WIFI Manuel utilisateur

LTS

LTS LTH-M201-C Manuel utilisateur

LTS

LTS LTH-D311GY-WIFI Manuel utilisateur

LTS

LTS LTH-D301GY-WIFI-2 Manuel utilisateur

LTS

LTS LTH-M201-1S Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur