Manual | Clou³ Multifunction 3in1 LED Display
Video + lighting + movement
• Use only a source of power that complies with local building and electrical codes and has both overload and
ground-fault (earth-fault) protection.
• Connect the LED display to power using only the cables supplied by attached with the product.
• Protect power cables from water and rain.
• Do not connect any other device than other LED display to the power throughput connector in the base of
the product.
• The number of LED display which are cascaded by one unit AC power cable is not allowed to exceed the
regular number.
• Before using the product, check that all power distribution equipment and cables are in perfect condition
and rated for the current requirements of all connected devices.
• Do not use the product if the power cable or a power plug is in any way damaged, defective or showing signs
of overheating.
• Refer any service operation not described in this manual to qualied technicians.
PROTECTION FROM FIRE
• Provide a minimum clearance of 40 cm around the cover at the back of the LED display base.
• Do not stick lters, masks or other materials directly on to LED modules.
• Do not modify the product in any way not described in this manual.
• Install only genuine parts in or on the product unless an alternative is described in this manual.
• Do not operate the product if the ambient temperature (Ta) exceeds 40°C (104°F).
PROTECTION FROM INJURY
• Ensure that any structure used for support as well as all fastening and connecting hardware can hold at least
10 times the weight of all supported devices and equipment.
• Do not suspend LED display using any other method of attachment than those described in this manual.
Check that all external covers and rigging hardware are securely fastened.
• Block access below the work area and work from a stable platform whenever installing, servicing or moving
the product.
• Do not look at lit LEDs from a distance of less than 40cm(1 ft.4in.)
without suitable protective eye wear.
• Do not view lit LEDs with optical instruments that may concentrate
the light output.
