Lowell COMPAC ACSP-2002-HW Manuel utilisateur

Models: ACSP-2002-HW, ACSP-2002-IG-HW, ACSP-2002-GTF-HW,

ACSP-2002-VTE-HW, ACSP-2002-IG-VTE-HW, ACSP-2002-RPC-HW, ACSP-2002-IG-RPC-HW

COMPAC®20A Surge Suppressor hardwired

F x—636.257.6606. Lowell m kes every effort to provide ccur te inform tion while reserving the right to

ch nge specific tions nd/or improve m nuf cturing methods without notific tion. (lowellmfg.com)

Spec. No. 1128

(rev. 02.08.12)

pg. 1 of 3

Model No. Description Outlets Amper ge Termin tion GTF Over/Under Protection Remote Control C p ble

ACSP-2002-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired No No No

ACSP-2002-VTE-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired No Yes No

ACSP-2002-RPC-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired No No Yes

ACSP-2002- G-HW COMPAC surge suppressor 2- G (1 duplex) 20A hardwired No No No

ACSP-2002- G-VTE-HW COMPAC surge suppressor 2- G (1 duplex) 20A hardwired No Yes No

ACSP-2002- G-RPC-HW COMPAC surge suppressor 2- G (1 duplex) 20A hardwired No No Yes

ACSP-2002-GTF-HW COMPAC surge suppressor 2 (1 duplex) 20A hardwired Yes No No

ACC-1ME Mounting Ears (1-pr)

Description

The COMPAC®advanced surge suppressor provides the highest

current capacity available in devices of its size to protect multiple

pieces of sensitive electronic equipment on a single circuit. t fea-

tures industrial strength “zero failure” technology backed by a ten

year warranty. t also includes a patented* rotating outlet plate that

makes it easy to change the position of the outlets from top to side

access. The compact body has a very low profile (1.75"H x 6"D x

9"W) and includes two mounting brackets to promote easy instal-

lation — on a wall behind a flat panel TV, under a counter, in a

rack or just about anywhere. Terminates to 6-ft. non-metallic flex-

ible whip that can be field-cut to shorter lengths.

• Model No. ACSP-2002-HW: features (2) 20A outlets (1 duplex)

• Model No. ACSP-2002-VTE-HW: features (2) 20A outlets (1

duplex) and VTE over/under protection that automatically turns

receptacles off when line voltage drops below 100V or rises

above 140V.

• Model No. ACSP-2002-RPC-HW: features (2) 20A outlets and

remote power control capability by a low voltage sequencer,

switch or control system that provides a maintained dry contact

closure.

• Model No. ACSP-2002-IG-HW: features (2) 20A insulated

ground outlets (1 duplex).

• Model No. ACSP-2002-IG-VTE-HW: features (2) 20A insulated

ground outlets (1 duplex) and VTE over/under protection that

automatically turns receptacles off when line voltage drops

below 100V or rises above 140V.

• Model No. ACSP-2002-IG-RPC-HW: features (2) 20A insulated

ground outlets and remote power control capability by a low

voltage sequencer, switch or control system that provides a

maintained dry contact closure.

• Model No. ACSP-2002-GTF-HW: features (2) 20A insulated

ground outlets (1 duplex) plus a ground transient filter. The

patented GTF technology filters potentially damaging electro-

magnetic transients/noise on the ground wire. The GTF installs

in series with the ground line of electrical circuits to attenuate

high frequency transients without impeding 60Hz fault current.

t introduces less than 0.1 ohm at 60Hz to the ground circuit

thereby assuring proper operation of any and all overcurrent

protection devices (circuit breakers, fuses, etc.). The GTF pro-

vides significant attenuation at higher frequencies where the

most damaging transients exist. At 1MHz, for example, the GTF

attentuates ground noise by 25dB which can be the difference

between a sensitive system functioning continuously or having

an interruption or “reset” occurence.

*US P tent No. D535178S

All versions of the 20A hardwired

COMPAC include 6-ft. non-metallic

flexible whip and mounting brackets.

ACSP-2002-HW

Features

• ETL Listed, ANS C62.41 Compliant, conforms to UL1449-3

• Low-profile chassis (1.75”H x 6”D x 9”W)

• Rotating outlet plate that rotates 90º for front or side access.

• LEDs provide visual system status

• Suppresses line to neutral with no ground contamination.

• TCR®technology defeats surges up to 72,000 amps with zero

failures

• Two mounting brackets allow versatile installation. (Optional

mounting ears are available if standard 19” rackmount instal-

lation is preferred.)

• Terminates to 6-ft. non-metallic flexible whip

• 10 year warranty

A & E Specifications

The 20A single-circuit surge suppressor shall be Lowell Model ___

with one duplex outlet. t shall be ETL Listed and conform to UL1449-

3. t shall meet ANS C62.41 and protect line to neutral without ground

wire contamination. t shall be capable of protecting electronic equip-

ment from transient voltages, spikes and surges up to 72,000 amps

and have a response time of less than 5 nanoseconds. t shall surface

or rear rackmount using mounting brackets and include outlets

mounted on a plate that can be rotated 90º for front or side access. t

shall include LEDs for visual ground verification and surge diagnos-

tics. [Model _____ shall include insulated ground outlets. Model ____

shall include automatic over/under voltage shutdown protection when

voltage drops below 100V or rises above 140V. Model _____ shall

include remote power control capability (by a low voltage sequencer,

switch or control system that provides a maintained dry contact clo-

sure). Model _____ shall include a ground transient filter.]

Optional mounting

ears (ACC-1ME) are

available if standard

19” rackmount instal-

lation is preferred.

Spec. No. 1128

(rev. 02.08.12)

pg. 2 of 3

F x—636.257.6606. Lowell m kes every effort to provide ccur te inform tion while reserving the right to

ch nge specific tions nd/or improve m nuf cturing methods without notific tion. (lowellmfg.com)

Models: ACSP-2002-HW, ACSP-2002-IG-HW, ACSP-2002-GTF-HW,

ACSP-2002-VTE-HW, ACSP-2002-IG-VTE-HW, ACSP-2002-RPC-HW, ACSP-2002-IG-RPC-HW

COMPAC®20A Surge Suppressor hardwired

T p / Fr nt Panel Lay ut

ACSP-2002-HW

ACSP-2002-GTF-HW

ACSP-2002-VTE-HW

ACSP-2002- G-HW

ACSP-2002- G-VTE-HW

ACSP-2002- G-RPC-HW

ACSP-2002-RPC-HW

Mechanica Specifications:

Dimensions: 9"W x 1.75"H x 6"D

Weight: 5 lbs.

nput Connections: Attached EC cord with NEMA 5-20P plug

Output Connections: (1) duplex 20A receptacle mounted on 90˚

rotatable plate.

Chassis: Steel with black powder epoxy finish

Mounting: (2) mounting brackets

Ground Transient Fi ter Specifications (ACSP-2002-GTF-HW):

Operating Voltage: 120 VAC

Operating Current: 20 Amps

DCR: .035 ohms

mpedance: 60 Hz: .06 ohms

100 kHz: 100 ohms

1 mHz: 1 Kohm

Performance Specifications:

Operating Voltage/Current: 120VAC / 20A, 60Hz

Maximum Surge Current: 72,000A (exceeds UL1449-3 6000V, 3000A)

nitial Clamping Voltage: 205V, UL rating 400V

Endurance: EEE C62.41-1991, B3 (C1), Pulses (lifetime):

1kv≥1,000,000; 3kv≥100,000; 6kv≥5000

Transient Noise Reduction: 29dB@100kHz, 70dB@1MHz

Response Time: Less than 5 nanoseconds

Temperature Range: 25˚C (77˚F) nominal

Protection Mode: Line to neutral, zero ground leakage

UL1449-2 Adjunct Results: 1000 surges, 6000 volts, 3000A, C1, and B3

waveforms ( EEE C62.41), NO FAILURES

Federal GSA specs (1996) Grade A, Class 1, Mode 1

Diagnostic LEDs (surge)** Top (green): ON = ground verified

Center (green): ON = protection active

Bottom (red): ON = protection reduced*

Applicable Standards: UL1449-3, EEE standard 587-80 A & B, EEE

standard C62.41-1991, EC 1000-4-5-1995

( EC 801-5).

Safety Agency Approvals: ETL Listed US and Canada.

**TCR®surge suppression technology provides the ssur nce of Gr de A, Cl ss 1, Mode 1

endur nce nd perform nce testing plus visu l di gnostic LEDs. The ground verified (green

LED), protection ctive (green LED) should lw ys be ON nd the reduced protection (red

LED) should be OFF. In the unlikely event the red LED illumin tes, full suppression c p bility

is NOT immedi tely or even necess rily compromised. The red LED indic tes the over ll life

expect ncy of the unit m y be reduced. Cont ct Lowell for rep ir or repl cement under the

unit’s ten ye r w rr nty.

All versions of the 20A hard-

wired COMPAC include 6-ft.

non-metallic flexible whip and

mounting brackets.

Models: ACSP-2002-HW, ACSP-2002-IG-HW, ACSP-2002-GTF-HW,

ACSP-2002-VTE-HW, ACSP-2002-IG-VTE-HW, ACSP-2002-RPC-HW, ACSP-2002-IG-RPC-HW

COMPAC®20A Surge Suppressor hardwired

F x—636.257.6606. Lowell m kes every effort to provide ccur te inform tion while reserving the right to

ch nge specific tions nd/or improve m nuf cturing methods without notific tion. (lowellmfg.com)

Spec. No. 1128

(rev. 02.08.12)

pg. 3 of 3

C ntr l Opti ns f r ACSP-2002-RPC-HW and ACSP-2002-IG-RPC-HW

Surface-mount with

exposed brackets.

Surface-mount with concealed

brackets (behind unit).

Mount to rack rail supports or

10-32 tapped rack rail.

Installati n Opti ns with M unting Brackets

Re-install the 4 screws.

Pull the outlet plate away from the

chassis and rotate.

Remove the 4 screws holding the rotating

outlet plate (2 on front, 2 on top).

R tating Outlet Plate

Changing fr m receptacle utput t hardwired utput

US P tent No. D535178S

Remove receptacle plate and

disconnect receptacle.

Attach conduit with wires to blank knock-

out plate. Splice to receptacle wires.

nstall using screws from receptacle

plate.

Ce manuel convient aux modèles suivants

Autres manuels Lowell Parafoudre

Lowell

Lowell ACSP2004-IG-GTF Manuel utilisateur

Manuels Parafoudre populaires d'autres marques

ELAC

ELAC ProteK PR91-W Manuel utilisateur

Tsubaki

Tsubaki TSM4000M1 Manuel utilisateur

QVS

QVS PP134C Manuel utilisateur

CyberPower

CyberPower CSP604T Manuel utilisateur

Davis Instruments

Davis Instruments Radio Surge Protector Manuel utilisateur

M-system

M-system MGA-100 Manuel utilisateur

CyberPower

CyberPower CSP706T Manuel utilisateur

CyberPower

CyberPower B300WRC1 Manuel utilisateur

M-system

M-system MGD-24 Manuel utilisateur

Leviton

Leviton 51120-3R Manuel utilisateur

Panamax

Panamax MAX 5400-EX Manuel utilisateur

CyberPower

CyberPower B1006T Manuel utilisateur

OBO Bettermann

OBO Bettermann ÜSM-20-230I1PE65 Manuel utilisateur

Minuteman

Minuteman MMS7120RCT Manuel utilisateur

Leviton

Leviton 52412-DS3 Manuel utilisateur

Savio

Savio LZ-07 Manuel utilisateur

Siemens

Siemens HNM3M120 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric LITOL LTM-125RF Manuel utilisateur