Lorex W462AQC Series Mode d'emploi

1/4

W462AQC : 2K Pan-Tilt Indoor Wi-Fi Security Camera -

Troubleshooting

help.lorextechnology.com/link/portal/57356/57366/Article/3627/w462aqc-hd-wi-fi-camera-troubleshooting

The following are some of the most common issues and troubleshooting tips for the 2K

Pan-Tilt Indoor Wi-Fi Security Camera (W462AQC).

General troubleshooting support

Many issues can be resolved with the following troubleshooting steps:

Ensure the latest version of the required software/app is installed and has the most

recent firmware (if applicable).

If using client software or a mobile app, ensure your device meets the minimum

system requirements.

Ensure the Internet connection and speed meet the minimum requirements for the

product.

Check the power connection(s).

Power cycle the product(s). To power cycle your product, please power off (if

applicable) and disconnect the power source for approximately 30 seconds.

Reconnect, and power on.

How to reset 2K Indoor Wi-Fi Pan-Tilt Security Camera?

Ensure your camera is plugged in and powered ON throughout the reset process.

1. Locate the reset button located at the side of the camera.

The SD card slot and reset button is located below the lens. To find the button, turn

the lens all the way up.

Do not damage the PTZ motor.

2/4

2. Press and hold the reset button for 10 seconds until the chime sounds to reset the

camera.

3. Look for flashing green light below the lens to indicate that the camera has been

fully reset.

Note: A solid or steady green light indicates that the camera has not been fully reset. You

may have to redo the process again.

The status indicator is not flashing green

If you don't hear a chime or if the status light is not flashing green, then your mobile

device is not connecting with your Wi-Fi network. Reboot your Wi-fi OR perform the

following steps to reset your device.

1. Lift the panel on the top of the camera to access the Reset button.

2. Press and hold the Reset button for 10 seconds to reboot the camera.

3. Wait for one minute until the camera LED is flashing green.

The camera is stuck downwards

Turn off Privacy Mode in Device Settings on the Lorex App. This will enable the lens to

slide upwards.

The camera image is not clear

Check the camera lens for dirt, dust, and spiderwebs. Clean the lens with a soft,

clean cloth.

Remove the vinyl cover on the camera lens.

3/4

The audio function is not working

1. Launch the Lorex App.

2. From the Devices screen, tap a device thumbnail to start live view for a single

camera.

3. Tap Talk to speak through your camera from your mobile device. Tap again to listen

in.

How do I reset the password of my camera?

If you have forgotten the password for your camera, the quick and easy way to resolve

the issue is to perform a hard reset on your camera OR perform the following steps:

1. Launch the Lorex App.

2. Tap icon above the channel thumbnail on the Devices screen.

3. Tap the thumbnail of your device on the Device Settings screen.

4. Tap Device Password.

5. Enter your old password and the new password.

Note: Your password must be 8-32 characters in length, and must contain a

combination of numbers, letters, and symbols.

6. Tap Save.

How do I reset the password of my Lorex App?

1. Launch the Lorex App.

2. Tap Settings tab.

3. Tap Account Settings.

4. Tap Log out.

5. Tap Forgot password? on the login screen and follow the in-app instructions.

Re-install the app, and tap Forgot password? on the login screen and follow the in-app

instructions.

Autres manuels pour W462AQC Series

Table des matières

Autres manuels Lorex Caméra de sécurité

Lorex

Lorex CVC7723 Series Manuel utilisateur

Lorex

Lorex CVC6930 Series Manuel utilisateur

Lorex

Lorex L15LD420 SERIES Manuel utilisateur

Lorex

Lorex Secure Manuel utilisateur

Lorex

Lorex LNZ32P4 SERIES Manuel utilisateur

Lorex

Lorex LEV2522PK4B Manuel utilisateur

Lorex

Lorex LDC8182 Manuel utilisateur

Lorex

Lorex VQ1030R Manuel utilisateur

Lorex

Lorex Aurora Series Manuel utilisateur

Lorex

Lorex SG8840 Manuel utilisateur

Lorex

Lorex VQ1636HRB Manuel utilisateur

Lorex

Lorex LW2101 series Manuel utilisateur

Lorex

Lorex LNZ32P4 SERIES Manuel utilisateur

Lorex

Lorex LW1741 Manuel utilisateur

Lorex

Lorex CVC6994CL Manuel utilisateur

Lorex

Lorex SG6110X Manuel utilisateur

Lorex

Lorex SG4934B Manuel utilisateur

Lorex

Lorex CVC6941 Manuel utilisateur

Lorex

Lorex LAB223 Series Manuel utilisateur

Lorex

Lorex LBV2723 SERIES Manuel utilisateur

Lorex

Lorex VQ1232 Manuel utilisateur

Lorex

Lorex CVC2051P/R Manuel utilisateur

Lorex

Lorex LNZ32P12 series Manuel utilisateur

Lorex

Lorex LNZ44P4 Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Lumens

Lumens VC-A50PNW Manuel utilisateur