Lorex L871T8-Z Manuel utilisateur

Lorex Home Center
L871T8-Z
Quick Start Guide
lorex.com

From all of us at Lorex, we welcome
you to our community – thanks for
your purchase of the Lorex Home
Center. We designed this product with
you in mind, to provide a new and
seamless home monitoring solution.
With its quality features that are easy
to navigate, the Lorex Home Center will
be more than a security system, but an
extension of your home. Here’s how to
get started.
Welcome!

What you’ll find in the box
Ethernet Cable
Storage (Pre-inserted)*
* See product packaging for details on storage conguration.
Power Adapter
Lorex Home Center

USB-A port (backup/
picture upload)
Ethernet
port
Speakers
LED light
status
Touchscreen
Antennas
Microphones
SSD
storage
slot
cover
Camera
Light
sensor
Pairing
/ reset
button
microSD
card slot
Power
port
Decrease
volume
Microphone
hardware kill switch
Increase
volume
Camera
lens cover
Power / lock
screen
Overview

Choose a central location with
good connectivity to your router
and devices. Limit the amount of
walls, ceilings, and other major
obstructions between the Lorex
Home Center and your devices.
Recommendations for
improving range:
Placement of the Lorex Home Center
• Ensure the antennas are
in the upright position.
• If you need to extend the
Lorex Home Center’s Wi-Fi
signal, we recommend
adding the Lorex Home Center
Extender (model #AX62TR).
Place the extender halfway
between the Lorex Home
Center and your other devices.

Connect the Lorex Home Center
1. Plug the power cable into the Lorex Home Center.
Then plug the power adapter into a wall outlet.
Follow the on-screen prompts to complete
rst-time setup.
2. Create your passcode.
Passcode – This is a 6-digit passcode used to unlock
your device or disarm your sensors (in case you use
sensors with the system). You do not have to enter the
passcode manually if the Face Unlock feature has been
activated. You also have the option to skip this step.
3. Create your device password.
Device Password – This password is used to add the Lorex Home Center to the
Lorex Home app. It must consist of at least 8 characters and contain a combination
of numbers, letters, and special characters.
Note: If you forget both your passcode and device password, you must do a hardware
reset. Press down on the reset button until a warning pop up appears. Select Yes.

4. Set up Face Unlock.
Face Unlock – This feature allows you to unlock the Lorex Home Center with the
built-in camera. Make sure that the camera lens is not covered, that nothing is covering
your face, and that you position your face directly in front of the camera. A reasonable
amount of light is required to have this function work properly. You also have the option
to skip this step and cover the camera with the built-in lens cover for privacy.
Important: Only one device owner’s face can be stored.
5. Power on your new cameras and/or doorbell near the Lorex Home Center.
Note: If you are adding existing cameras that were previously set up through the Lorex
Home app, you will need to ensure that you are running the latest Lorex Home
compatible rmware and then reset the cameras. See page “Troubleshooting: Adding/
Updating Cameras” steps 7-10 for details. This will not erase any of the recordings
stored on the cameras.
6. Choose your preferred connection set up method from the following three options:
Wired Wireless Oine

Option A - Wired
Tap the wired icon and connect the Lorex Home Center
to your home router using the provided Ethernet cable.
The Lorex Home Center must be placed near your
home router and positioned centrally relative to the
different Lorex devices.
Option B - Wireless
Tap the wireless icon, select your Wi-Fi network from the list, then enter the Wi-Fi password
to connect. The Lorex Home Center can be placed wherever there is a good connection to
your home router and positioned centrally relative to the different Lorex devices.
Note: Requires a dual-band router (2.4GHz/5GHz) with 5GHz Wi-Fi network enabled.
Network Setup
Option C - Oine
Tap the oine icon to setup through a direct connection. The Lorex Home Center can work
oine and no internet connection is required to operate it or connect it to different Lorex
devices. Central placement is important for the Lorex devices to communicate directly with
the Lorex Home Center. You will not be able to use the Lorex Home App to access the Lorex
Home Center remotely and will not receive automatic update notications.

Device Setup
1. In the Device Setup screen, select the device that you want to add and tap Next.
List of compatible devices:
Note: Make sure your devices are compatible, powered on and nearby the Lorex Home
Center for initial setup. Once set up, you can unplug them and move them to their nal
locations as long as they are within range of the Lorex Home Center.
Important: If your camera has not been detected, you will need to update the camera’s
rmware by connecting it directly to the router and update the rmware through the
Lorex Home app. See page “Troubleshooting: Adding/Updating Cameras” for more
details.
2. Pair the Lorex Home Center to the Lorex Home app for remote access and viewing.
Notes:
• Use the device password when asked (Step 3 in “Connect the Lorex Home Center”).
• This does not apply if you are using the oine connection method.
Cameras Add a Wi-Fi indoor or outdoor camera or a oodlight camera.
Doorbell Add a Lorex video doorbell camera.
Sensors Add a compatible Lorex sensor.
Extender Add a Lorex Home Center Extender to expand the range of cameras and sensors.
Previously set up
compatible Lorex devices
If your device is already set up through the Lorex Home app, press the link
“I already have devices set up through the Lorex Home App”.

Touchscreen Gestures
Swipe right from the left edge
of the screen to return to the
previous screen
* This status only applies to the Lorex sensors.
Swipe up from the bottom
edge of the screen to return to
the home screen
Swipe down from the top
edge of the screen for the
drop-down menu
Light Status Indicators
Away* Home* Disarmed* System Error Voice Assistant
Activated
Guide to Basic Operations
Table des matières
Autres manuels Lorex Domotique



















