Lorell LLR84550 Manuel utilisateur
ITEM #
TRIPLE CERAMIC HEATER
WITH MOTION SENSOR
MODEL #
PLEASE READ AND SAVE THESE INSTRUCTIONS
1
3068797
PREPARATION
This heater is pre-assembled in factory.
Please note this product is rated 12.5 amps (1500W) at 120V, 60 Hz.
Place the heater on a firm level surface free from obstructions, and at least 3 ft. away from any wall and
any other objects such as furniture, curtains, plants or combustible material.
OPERATION INSTRUCTIONS
Di
g
ital Indicato
r
Thermal Pilot Lamp
Turning the Unit On
Plug the heater into a grounded 120V outlet, the buzzer will sound.
To turn the heater on press ON/OFF. When initially turned on, the heater will display the current room
temperature in °Fahrenheit. Press the TEMP and TIMER buttons at the same time for 3 seconds
to change the display to °Celsius. Press the same two buttons together again for 3 seconds to
change the display back to °Fahrenheit.
Upon turning the heater on, the unit will be in “HI” heat (1500 W) and will display the current room
temperature.
Press MODE repeatedly to the desired setting. The cycle is HI-LO-FAN-AUTO.
HI- Fan and heating element operate at 1500 W
LO- Fan and heating element operate at 900 W
FAN- Only the fan will operate blowing cool air to circulate.
AUTO- Motion Sensor will work at this mode. This AUTO function is for energy saving and safety to
provide instant heating (If you want to use this heater to warm the whole room, please choose HI or Lo
setting). If you forget to turn off your heater when leaving the room, the heater will automatically stop
heating in 10 minutes after Motion Sensor detects no motion. When somebody enters into the room, heater
will automatically start heating again.
Turning the Unit Off
To turn the heater off, press the ON/OFF button and the buzzer will sound. After the unit is turned off, the
fan will continue to run for 15 seconds to cool down, the digital screen will display the process from 15
backward to 1. After the display turns off, unplug the heater from the electrical outlet.
Setting the Temperature
The default temperature is 95°F. The temperature can be set only on HI, LO or AUTO mode.
Timer Pilot Temperature and
Timer setting knob
3
Thermal Pilot Lamp
Timer Pilot
Digital Indicator
Temperature and Timer
setting knob
Press the TEMP button, the temperature will be flashing. Turn the Temperature and Timer setting knob
clockwise, the temperature will increase; Turn the knob counterclockwise, the temperature will decrease.
Turn the knob to the desired temperature. Around 5 seconds after set the temperature, the digital screen
displays current room temperature again.
Once the room temperature reaches the set temperature, the heater will stop heating to save the energy.
Once the room falls lower than the set temperature, the unit will resume heating. The heater will cycle off
and on to maintain the set temperature.
Setting the Timer
This heater has a timer that will enable the heater to turn on and off automatically within 12 hours.
Setting the heater to turn on automatically.
Plug the heater into a grounded 120V outlet, the buzzer sounds.
Press the TIMER button, the timer symbol indicator will illuminate. Turn the Temperature and Timer
setting knob to set the time of auto-on. Turn the knob clockwise, the time will increase; Turn the knob
counterclockwise, the time will decrease.
Setting the heater to turn off automatically.
After the heater turns on (HI, LO, FAN or AUTO), press the TIMER button and the timer indicator will
illuminate. Turn the Temperature and Timer setting knob to set the auto-off time.
The timer indicator will appear on the digital screen after the timer is set.
POWER/MODE Function Map
TIMER SET
(AUTO OFF)
TIMER SET
(AUTO ON)
CARE AND MAINTENANCE
We recommend cleaning the heater at least once a month and before off-season storage.
Turn the heater OFF and unplug it. Allow it to cool.
Use a dry cloth to clean the external surfaces of the heater.
DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION.
Pack the heater in its original container and store it in a cool, dry place.
Don’t disassemble this heater.
The motor is factory lubricated for life and will require no further lubrication.
PLUG IN ON
HI
LO
AUTO
FAN
OFF
TEMP SET
TIMER SET
(AUTO OFF)
M
O
DE
TEMP SET
HI
TIMER SET
(AUTO OFF)
4
Table des matières
Autres manuels Lorell Chauffage
Lorell
Lorell LLR84380 Manuel utilisateur
Lorell
Lorell LLR84162 Manuel utilisateur
Lorell
Lorell LLR84163 Manuel utilisateur
Lorell
Lorell LLR33557 Manuel utilisateur
Lorell
Lorell LLR33568 Manuel utilisateur
Lorell
Lorell LLR99843 Manuel utilisateur
Lorell
Lorell LLR33559 Manuel utilisateur
Lorell
Lorell LLR84161 Manuel utilisateur
Manuels Chauffage populaires d'autres marques
oventrop
oventrop Regucor Series Manuel utilisateur
Blaze King
Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur
ELMEKO
ELMEKO ML 150 Manuel utilisateur
BN Thermic
BN Thermic 830T Manuel utilisateur
KING
KING K Series Mode d’emploi
Empire Comfort Systems
Empire Comfort Systems RH-50-5 Guide de démarrage rapide
Empire Heating Systems
Empire Heating Systems WCC65 Manuel utilisateur
Wetekom
Wetekom 92 86 43 Manuel utilisateur
Desa
Desa SPC170-F Manuel utilisateur
Watlow
Watlow Watrod Electric Tubular Heaters Manuel utilisateur
Haverland
Haverland ECO-DRY GPS Series Manuel de la liste des pièces
Stelpro
Stelpro ASILVC2060 Series Manuel utilisateur