LONEALERT Man Down X Manuel utilisateur
367-1001
Product Manual
Man Down X.
Press and hold the
SOS button until the
device vibrates and
beeps.
Raising an alarm
How to use the
Man Down X.
To turn the device on press and
hold the power button until you
see the blue and green LEDs
come on for a few seconds and
then begin flashing. To Power Off
press and hold the power button
until you hear 2 beeps.
Power On/Off
Custom Timer
To create a Custom
Timer press and hold the
phone button.
Default Timer
To create a Default Timer,
press and hold the +
button until the device
vibrates.
To cancel any Active
Timers, press and hold the
- button until the device
vibrates.
Cancel Timer
Press the phone button
once or twice to end a
call.
Ending a call
A Custom Timer creates a Timer
for a period set by the user. To
create a Custom Timer press and
hold the phone button on the front
of the Man Down X until it beeps
and vibrates. You will be prompt-
ed to leave your desired length of
time. You can also leave a mes-
sage describing your location or
other relevant information. This
is available to Respondents in an
Alert.
Custom Timers
A Default Timer creates a
Timer for a fixed duration. The
duration is set in The OWL
Portal.
To create a Default Timer on
the device, press and hold the
+ button on the side of the
Man Down X until the device
vibrates which indicates that
the Timer is set.
Default Timers
Timers
When your Timer expires, the device will start ringing. This is to
remind you that your Timer has expired and you need to take
action.
With a push of a button a lone worker can create and set
Timers. When a set Timer elapses before you are able to
take action, The OWL will create an alert.
To Cancel a Timer, press
and hold the - button
until
the device vibrates which
indicates that the Timer
cancellation has been
sent.
Cancelling Timers
With a push of a button a lone worker can create and set
Timers. When a set Timer elapses before you are able to
take action, The OWL will create an alert.
If your Timer expires before
you have been able to up-
date it, you will receive a call
on your Man Down X device
or to the phone number you
have registered with us. In
this event, you need to take
action to let people know you
are ok.
If the call is received via your
mobile phone, you will need
to enter your PIN code when
prompted via the keypad.
Your Timer will be restarted
if you had a periodic Timer
set, or cancelled if you set a
standard Timer.
If no mobile is set up, the call
will come to your device. You
can’t enter a pin, but just end
the call and either Create or
Cancel a Timer within 5 min-
utes to prevent an Alert.
Expired Timers
The Man Down function provides the lone worker
with added protection. Man Down is a tilt-switch
inside the Man Down X that automatically sends
an alert signal if the device is tipped on its side for
longer than the chosen preset period.
This feature increases situational awareness,
enhances worker safety and improves response
time.
The device remains silent for 30
seconds and then notifies you
it is in a Man Down status. You
then have 1 minute to cancel
this status by simply putting the
Man Down X upright during this
period. If not cancelled, an Alert
will be raised.
Functionality
What is
Man Down?
Lone worker
trips, falls or has
an accident.
The fall will
activate the Man
Down function.
This alerts The
OWL which will
then contact your
nominated contacts.
Your contact will try
to make contact via
the device to check
you are OK and send
help if needed.
1.
2.
3.
4.
The sequence
of events.
Firstly, do not panic! If the alert is a false alert you
simple need to let the Alarm Receiving Centre
know, they will ask you for your PIN to verify your
identity.
What’s
my PIN?
You will be provided with a
memorable PIN by either your
manager, or your organisation’s
LONEALERT Champion.
What happens
with alerts?
What happens if you raise
a false alert?
Alerts are dealt with by the Alarm Receiving Centre or
your nominated contacts, usually colleagues. Your Man
Down X will connect you directly with a Responder op-
erator who will provide assistance and reassurance.
If required, they can direct emergency services to you.
Nominated contacts will be automatically notified by call,
text message and email.
Knowing how to raise an alert quickly is essential.
The Panic Alert button on the Man Down X is located
on the front of the device, designed for quickness
and ease of use in an emergency.
To raise an alert press and
hold the SOS button until
beeps and vibrates.
The Panic Alert
In an alert, a brief beep
and vibration indicates
that the SOS button has
been pressed, the Man
Down X will then raise
a panic in accordance
with your company
procedure.
If you have our Alarm
Receiving centre set as
your first point of con-
tact , your Man Down
X will raise a 2 way call
with them.
The
Panic Alarm
When a fall is detected, the Man Down X is silent for 30 sec-
onds. It then beeps, vibrates and the Blue LED double flashes
for 1 minute. If not cancelled by putting the unit upright, an
alarm is raised.
Red & Blue LEDs
Continuous Red light is battery charging
Fast flash (0.3 seconds on , 0.3 seconds off) low battery
Flashing Blue light (1 second on, 1 second off) GPS initial-
ising
Flashing Blue light (every 5 seconds) is device in sleep
mode
Blue LED off is GPS fix
What do the LED
lights mean?
Please note: GPS location can take a few minutes to find your
location when you power your Man Down X up for the very
first time. We suggest that before use, you place it close to
an external window or wear it outside for around 5 minutes.
Autres manuels pour Man Down X
1
Table des matières
Autres manuels LONEALERT Dispositif de protection
Manuels Dispositif de protection populaires d'autres marques
nxt
nxt BIA-nXt-DPC 1-22 Manuel utilisateur
TFortis
TFortis SG-Switch Manuel utilisateur
BERNINI DESIGN
BERNINI DESIGN Be172 Manuel utilisateur
Rayleigh Instruments
Rayleigh Instruments RI-ENERGYSET-3P-ESS-50-100 Manuel utilisateur
GE
GE Multilin 3 Series Manuel utilisateur
E.K.T.
E.K.T. ke-DP01 Manuel utilisateur
