Configuring the USRID-16W
for logging USRID-16W User Guide 10
Configuring the USRID-16W for logging
Each USRID-16W model is delivered to you pre-configured with the prescribed WHO
recording profile, ready to be started.
The display is off. Briefly pressing the STOP/Review button shows:
Although the indicator is already configured, you can make a limited number of
adjustments to the configuration. These include:
lAdding a description, which will show on the PDF report
lChanging the appearance of the PDF report
lChanging the language in which the PDF report will be printed
lSelecting which files are generated at the end of the trip
This is done using LogTag® Analyzer software, which can also be used for downloading
and analyzing data, using the following steps:
lStart the LogTag® Analyzer software.
lRemove the protective cap from the indicator's USB connector, plug it into a USB
socket on your computer and wait for the drivers to be installed3.
lFrom the menu click LogTag - Configure; LogTag® Analyzer will display the
configuration options for connected indicators.
Standard Configuration Options
The only parameter in the standard configuration options you are permitted to
customize is the Description.
All other parameters are preset to the requirements of the WHO for shipping indicators:
Start Option: Push Button
Number of days to record: 40
Recording Interval: 5 minutes
Start delay: 1 hour
3 You can configure more than one USRID-16W at the same time, however it is practical to limit the number of units to about 6,
using a powered USB hub.
